Separett Flexible Ventilation Pipe Tiny Installation Guide

Installation of ventilation hose

Flexible Ventilation Pipe Tiny

The ventilation hose offers a new option for installing your urine diverting toilet where hard pipes are not possible or preferred. The ventilation hose is compatible with the original pipes included with the product as well as various installation Packet/Kit.
It is possible to use both flexible and hard pipes in the same installation. This does not change other recommendations and limitations stated in the user and installation manual.
If more than 2 meters are needed, extra ventilation hose (art no 1335) must be purchased. The ventilation hose can be connected to the straight joint that comes with the toilet.
A maximum of 3 meters of ventilation hose and a maximum of 3 x 90-degree bends are allowed for installation.
It is not permitted to pull the ventilation hose into a 360-degree loop.

Recommendations for the installation of ventilation hose

Please note that as short an installation as possible is recommended to ensure full functionality throughout the year.
During installation:

• The ventilation hose should not be placed anywhere where water could potentially enter through the hose (especially in boats)
• The ventilation hose should not be places anywhere where potential odors could create problems
• It is recommended to glue ventilations hose pieces including joints and wind cap together to minimize the risk of them coming apart (especially in boats, cars, or other installations where the wind can strongly affect the wind cap)
• Silicone can be used to easily connect the ventilation hose to various pipes and to seal the joints