SENTRY BTSUN Sound Glasses
SOUND GLASSES
Specifications
- Driver Unit:16*9*3.0 mm
- Impedance: 78+/-30hms
- Playback: 4HR@50% volume
- Mic Sensitivity:-42DB
- Power: 674MW
- Frequency: 20Hz-20KHz
- Battery: Lithium-ion
- Communication system: Bluetooth Specification version 5.3 Battery Capacity: 120mAh
- Operating Temperature: O oc to 40 oc Radio Frequency: 2.402 GHz-2.480 GHz
Note:
Actual playback times and charge times are approximate and based on 50% volume, and the product is fully charged. Battery performance may be affected by multiple factors including but not limited to ambient temperature, listening volume, and/or distance from the source audio device, USB TType-C@ andIJSB-C@ are registered trademarks of USB Implementers Forum.
Bluetooth Pairing/Connection
Long press the buttonO for 2 seconds to turn on the product, and the blue light will flash and prompt “power on”, then the red and blue lights will flash, prompting “pairing” and entering the waiting connection state. Enable the Bluetooth function on your media device. Search the Bluetooth device named BTSIJN. Click or tap to connect (pair). After a successful connection(pairing) you will hear “Connected” and the blue light flashes every five seconds. Now you can play music, or use Bluetooth phone functions.
Key Functions:
- On: Press and hold the buttonO for 2 seconds to turn n it on. Off: Press and hold the buttonO for 3 seconds to turn it off.
- Music Pause: Press the buttonO to pause playing, and press the buttonO again to resume playback.
- Volume increase: Press the buttonO. When the volume reaches its maximum, you will hear a “beep” sound.
- Volume ddown Press and hold the buttonO. When the lowest volume is reached, 10% of the volume is retained.
- Answer/Hang-up: Press the buttonO to answer when the call is incoming, and press it again to hang up. (When there is a new call during the call, press the buttonO to answer the new call and hang up the current call.)
- ReRejectionPress the buttonO to reject the call. Low battery warning: When the battery is low, there will be a “Pleachargeing” prompt sound every 60 seconds. Please charge the device as soon as possible.
Included Cables
- USBCDC5VUSB
To charge device
Plug the small side of the USBC cable into the us charging port on your headset and plug the large into usb port on a computer, or AC adapter (not included). BTSUN: When the product is charging, the LED light will keep in red. When the product is fully charged, the red LED light will be off and the blue light will be on.
Important Safety Instructions & Warnings
Charging your device
Only use a power adapter with applicable country regulations and international and regional safety standards. Other power adapters may not meet applicable safety standards, and using such adapters could pose a risk of death or injury. Avoid prolonged skin contact with the charging cable and connector when the charging cable is connected to a power source because it may cause discomfort or injury. Sleeping or sitting on the charging cable or connector should be avoided.
Important Safety instructions
- Read these Instructions.
- Keep these Instructions.
- Heed all Wamings.
- Follow all instructions.
- Do not use this device near water.
- Clean only with a dry cloth.
- Do not block any ventilation openings. UseUsee the manufacturer’s instructions.
- Do not charge near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Discontinue use if damaged.
- Protect the cord from being walked on or pinched particularly at plugs, and convenience receptacles, to the point where they exit from the device.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms and when charging is completed.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
WARNING
- CAUTION: To prevent electric shock, use only compatible and certified USB charging devices.
- WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
- CAUTION: Use of controls or adjustments or performance of procedures other than those specified may damage your device
- WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- WARNING: Always store in a cool dry location.
CAUTION:
- Tinted eyewear is not recommended to be worn for night driving
- Sunglasses are not intended for use as protection against artificial light sources, such as sun lamps, lasers, etc.
- Sunglasses are not recommended for high-risk impact sports participants Sunglasses are not intended for use as industrial safety eyewear.
- Never stare directly at the sun or an eclipse with or without sunglasses.
- NOT FOR USE WHILE DRIVING. DO NOT USE WHILE DRIVING.
LENSES ARE NOT SHATTERPROOF.
WARNING:
Never wear the product while charging the product. Remove the product if any discomfort is experienced.
Choking hazard:
The product, packaging, and some of the included accessories may present a choking hazard to small children. Keep these accessories away from small children. The bags themselves or the many small parts they contain may cause choking if ingested. Danger improper battery replacement may cause an explosion and injury.
90-Day Warranty
Sentry warrants this product to be free from defects in materials and workmanship 90 days from the date of original purchase. This warranty does not pertain to damage resulting from accident, abnormal use, misuse: or neglect. Any defective product will be replaced if returned to an authorized Sentry dealer or Sentry directly at P.O. Box 885, One Bridge St. Hillburn, NY 10931. Please enclose a check for $5.00 for shipping & handling.
FCC ID: 2ACP4BTSUN Model#BTSUN
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SiG, Inc. and any use of such marks by Sentry Industries IInc.is under license. Other trademarks and trade names are those of their respective owners. Sentry Industries Inc. declares that radio equipment BTSUN complies with Directive 2014/53/EU. The EU Declaration of Conformity is available at https://sentryindustries.com/european-declaration-of-conformity/.
Conformity with Directives
This product is CE marked to denote conformity with Directives 73/23/EEC (low voltage) and 89/336/EEC (Electromagnetic Compatibility), as amended.
Environmental Protection
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.
- Supplier’s Declaration of Conformity 47 CFR 47 CFR Part 15.21, 15.105(b)
- Compliance Information
- Sentry Bluetooth Earphone and Headphone
- Responsible Party –
- Sentry Industries Inc
- One Bridge street Hillburn, NY 10931
- Tel +1 845 753 2910
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
“NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiates radio frequency energy and, if not installed and usedbyh the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment”
- Product Name: Sound glasses
- Model number: BTSUN
- Materials: Plastic / TAC
- Distributor: Sentry Industries Inc
- Address: 1 Bridge Street, NY 10931, USA
- Place of manufacture: Shantou City, Guangdong Province, China
- Production date: Jan 25, 2025
- Batch NO.: 4095
- Date Code 01/25
- Contact details: +1 (845)753 2910
- Age of use: 18+
Documents / Resources
 |
SENTRY BTSUN Sound Glasses [pdf] User Manual 2ACP4BTSUN, 2ACP4BTSUN, BTSUN Sound Glasses, BTSUN, Sound Glasses, Glasses |