SIMPLY SMART LED
2 x AAA Batteries are required (not included)
DO MORE WITH YOUR LIGHT BULB REMOTE
Support:
If you encounter any issues, please reach out to your local Sengled Support team. Visit the following website for web support: https://support.sengled.com/
https://support.sengled.com/hc/en-us/articles/219499477-Micro-Smart-Bluetooth-Mesh-System
Sengled USA, Inc.
4646 Distribution Pkwy,#400, Buford, GA 30519 www.sengled.com
| Pair button | Press the button, add the bulb to group G1-G3 |
| Search button | Press the button, add the bulb to group G1-G3 |
| Unpair button | Press the button, remove the bulb from group G1-G3 |
| G1, G2, G3 group button | Press the button (after press the pair or unpair button), select the group |
| All button | Select all bulb |
| On button | Press the button to switch the bulb on |
| Off button | Press the button to switch the bulb off |
| Decrease the color temperature button (warm) | Press the button to decrease the color temperature of bulb |
| Increase the color temperature button (cool) | Press the button to increase the color temperature of bulb |
| Increase brightness button | Press the button to increase the brightness of the bulb |
| Decrease brightness button | Press the button to Decrease the brightness of the bulb |
| 2 hours timer button | Press the button to set a 2 hours timer |
| 4 hours timer button | Press the button to set a 4 hours timer |
| R color button | Press the R color button(after select the group), set the bulb to Red color |
| G color button | Press the G color button(after select the group), set the bulb to Green color |
| B color button | Press the B color button(after select the group), set the bulb to Blue color |
| Color button | Press the button to set the bulb color (7 types) |
| LED indicator(up-right) | LED indicator flash when press “Pair” “Search” “Unpair” button |
| LED indicator(group) | LED indicator flash when press all button except “Pair” “Search” “Unpair” button |
LIMITED WARRANTY:
Sengled warrants product from defects in material or workmanship for two (2) years from the date of original purchase, as evidenced by the purchase date on the receipt. For more details, visit sengled.com
PN: 1932000136
Made in China
SKU: B2E-G7F
Model: B2E-G7F
FCC ID: 2AGN8-B2EG7F
IC: 20888-B2EG7F
NOTE: This device complies with Part 15 of the FCC rules.
Operaton is subject to the foowing two conditions: 1) this device may not cause harmful interference and 2) this device must accept any interference received, including interference that may cause undesired operation. For details, reference
Documents / Resources
 |
sengled B2EG7F Simply Smart LED Remote [pdf] User Manual 2AGN8-B2EG7F, 2AGN8B2EG7F, B2EG7F Simply Smart LED Remote, B2EG7F, Simply Smart LED Remote, Smart LED Remote, LED Remote, Remote |