SENA RC4 Remote Control 4 Button Handlebar Control

Specifications

• Product: RC4 Remote Control for Headset
• Button Commands: Volume adjustment, Answer/end phone calls, Voice dial, Speed dial, Intercom pairing, Music control, FM radio control, Mesh Intercom functions, Camera control, Voice Command

Installation

Note
If your handlebar requires better grip for holding the RC4 in place, apply the rubber band around the handlebar.

Getting StartedRemove the plastic tape from the battery slot to begin using the RC4.

Replacing the Battery

Button Operation

Power On/OffNote

• You can control the headset using the RC4 only after you pair them together.
• The RC4 supports Sena headsets with Bluetooth 4.1 or higher.

Battery Check

Bluetooth Pairing

Factory Reset

Headset Control
To control your headset using the RC4, please refer to the Quick Reference Guide for button operations on functions such as phone, music, and intercom.

Note: The Multifunction Button remotely controls special buttons such as the Ambient Mode Button of the 20S and the Camera Button of the 10C. Please refer to the Quick Reference Guide for more details.

Volume Adjustment
To adjust the volume, tap the (+) Button to increase volume and tap the (-) Button to decrease volume.

Answer/End Phone Calls
To answer a phone call, tap the Center Button. To end a phone call, press the Center Button for 2 seconds.

Voice Dial/Speed Dial
To activate voice dial, press the Center Button for 3 seconds. For speed dial, press the (+) Button for 3 seconds.

Intercom Pairing
To pair intercom devices, press the Center Button for 5 seconds.Start/end intercom conversations by tapping the Center Button.

Music Control
Play/pause music with a single tap of the Center Button. Navigate tracks by pressing the (+) or (-) Button for 1 second.

FM Radio Control
Turn the FM radio on/off by pressing the (-) Button for 1 second. Select presets or seek stations using the Center Button or tap the (+) or (-) Button accordingly.

Mesh Intercom Functions/Camera Control/Voice Command
Utilise various functions such as Mesh Intercom, Camera control, and Voice Command by following the specific button commands mentioned in the manual.

Control Operation for Headset

Type	Operation	Button Command
Basic Operation	Volume adjustment	Tap the (+) Button or the (-) Button
	Configuration menu	Press the Center Button for 10 seconds
Mobile Phone	Answer phone call	Tap the Center Button
	End phone call	Press the Center Button for 2 seconds
	Voice dial	Press the Center Button for 3 seconds
	Speed dial	Press the (+) Button for 3 seconds
	Reject incoming call	Press the Center Button for 2 seconds
Intercom	Intercom pairing	Press the Center Button for 5 seconds
		Tap the Center Button of any one of the two Remotes
	Start/end each intercom	Tap the Center Button
	Start Group Intercom	Tap the (+) Button and the (-) Button
	End all intercoms	Press the Center Button for 1 second
Music	Play/pause Bluetooth music	Press the Center Button for 1 second
	Track forward/ back	Press the (+) Button or the (-) Button for 1 second
FM Radio	FM radio on/off	Press the (-) Button for 1 second
	Select preset	Press the Center Button for 1 second
	Seek stations	Double tap the (+) Button or the (-) Button
	Scan up FM band	Press the (+) Button for 1 second
	Stop scanning	Press the (+) Button for 1 second
	Save preset while scanning	Tap the Center Button

Button Operation for Headset

Product	Operation	Button Command
50S, 50R	Mesh Intercom on/off	Tap the Multifunction Button
	Mesh Grouping	Press the Multifunction Button for 5 seconds
50C	Camera on	Tap the Multifunction Button
	Camera off	Tap the Multifunction Button and the (-) Button
	Start/stop video recording	Press the Multifunction Button for 1 second
	Take photo	Tap the Multifunction Button
20S	Voice Command	Tap the Multifunction Button
	Ambient Mode	Double tap the Multifunction Button
	Start Group Intercom	Press the Multifunction Button for 1 second
Others	Start Group Intercom	Press the Multifunction Button for 1 second

Sena Technologies, Inc.
www.sena.com
Customer Support: support.sena.com E-mail: support@sena.com

FAQs

How do I start a group intercom session?

To start a group intercom session, follow the instructions provided for your specific model (RC4 or Mesh Intercom).

How do I adjust the volume during a phone call?

Use the (+) and (-) Buttons to adjust the volume while on a phone call.

Documents / Resources

SENA RC4 Remote Control 4 Button Handlebar Control [pdf] User Guide RC4, 50S, 50R, 50C, 20S, RC4 Remote Control 4 Button Handlebar Control, RC4, Remote Control 4 Button Handlebar Control, 4 Button Handlebar Control, Handlebar Control, Control

References

• User Manual