DT Co Linear Insert Kits
Product Information
Specifications:
- Product Name: Co-Linear Insert Kits
- Kit Includes:
- High Wind Termination Cap or Prairie Termination Cap with 18 x
18 base plate - Two 35 foot aluminum flexible liner lengths
- Exhaust identified with red tape at both ends
- Clamps & hardware pack
- High Wind Termination Cap or Prairie Termination Cap with 18 x
Product Usage Instructions:
- Ensure all components are included in the kit as listed
above. - Identify whether you require the High Wind Termination Cap or
Prairie Termination Cap based on your installation needs. - Follow the provided instructions to connect the aluminum
flexible liner lengths to the termination cap securely. - Use the clamps and hardware pack to properly secure the
components in place. - Ensure the exhaust is correctly identified with red tape at
both ends for proper installation. - For further information, visit the provided website:
www.selkirkcorp.com
FAQ:
Q: Can I purchase the caps separately?
A: Caps are only available with the new Co-Linear Insert Kit and
are not sold separately.
Q: Where can I find more information about the product?
A: For more information, visit www.selkirkcorp.com
Co-Linear Insert Kits
· Use when installing a direct vent co-linear gas insert into a masonry fireplace
· Easy installation saves time and labor costs
Kit Includes:
High Wind Termination Cap or Prairie Termination Cap with 18″ x 18″ base plate Two 35 foot aluminum flexible liner lengths Exhaust identified with red tape at both ends Clamps & hardware pack
Choose from the kits listed below:
1604633 1604634 1604653 1604654
4DT-33IK35VB 3″/3″ 35′ Aluminum Flex Length / High Wind Cap Kit 4DT-34IK35VB 4″/3″ 35′ Aluminum Flex Length / High Wind Cap Kit 4DT-33IK35VBP 3″/3″ 35′ Aluminum Flex Length / Prairie Cap Kit 4DT-34IK35VBP 4″/3″ 35′ Aluminum Flex Length / Prairie Cap Kit
Note: Cap only available with the new Co-Linear Insert Kit. Caps are not sold separately.
www.duraventgroup.com
18″ 18″
18″ 18″
Visit www.selkirkcorp.com for more information
SK_DVT_SS001E_05-25
Documents / Resources
 |
Selkirk DT Co Linear Insert Kits [pdf] Owner's Manual 1604633, 1604634, 1604653, 1604654, DT Co Linear Insert Kits, DT, Co Linear Insert Kits, Linear Insert Kits, Insert Kits |