SELEC MV Series Digital Voltmeter with LED Display
Product Information
| Product Name | Description | Display |
|---|---|---|
| MV15 | 3 Digit 7 segment LED display | (48 x 96) |
| MV205 | 3 Digit, LCD with Analog style bar graph indication | (48 x 48) |
| MV305 | 3 Digit, LCD with Analog style bar graph indication | (72 x 72) |
| MV507 | 3 Digit, LCD with Analog style bar graph indication | (96 x 96) |
Specifications
| Display range | Input range | Input Frequency | Max continuous Input range | Over range indication | Input impedance | Resolution | Electrical connection | Supply Voltage(Vn) | Weight | CE and UL Certification | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 0 to 516V | 0 to 300V (L-N) 0 to 516V (L-L) | 50 to 480V AC | 50 / 60Hz | 516V | 170gm | 1V | 180gm | 180gm | 165gm | 194gm | YES | YES | CE ONLY | YES | YES | YES |
| SPECIFICATIONS | |||||||
| AC MODEL | |||||||
| Product Name | MV15 | MV205 | MV305 | MV507 | MV207 | MV2307
3 Ø Digital voltmeter with Selector switch |
|
| Description | 1 Ø Digital voltmeter | ||||||
| Display | 3 Digit 7 segment LED display 3 Digit, LCD with Analog style bar graph indication
0 to 516V 0 to 300V (L-N) 0 to 516V (L-L) 50 to 480V AC 50 / 60Hz 516V “Or” for input > 516V 1M (±5%) 1V |
||||||
| Display range | |||||||
| Input range | |||||||
| Input Frequency | |||||||
| Max continuous Input range | |||||||
| Over range indication | |||||||
| Input impedance | |||||||
| Resolution | |||||||
| Electrical connection | 1 Ø – 2 wire
240V AC (± 20%), 50 / 60Hz ; 110V AC (± 20%), 60Hz |
3 Ø-4wire, 3 Ø-3wire
206gm |
|||||
| Supply Voltage(Vn) | |||||||
| Weight | 170gm | 180gm | 180gm | 165gm | 194gm | ||
| CE and UL Certification | YES | YES | CE ONLY | YES | YES | YES | |
| DC MODEL | AC MODEL ( AUTO RANGING TYPE ) | |||||
| Product Name | MV15-DC-20V | MV15-DC-200V | MV15-DC-200mV | MV15-DC-2V | MV15-AC-20/200V | MV15-AC-200/2000mV |
| Description | Digital voltmeter
3 ½ digit 7 Segment LED Display |
|||||
| Display | ||||||
| Display range | -19.99V to
+19.99V |
-199.9V to
+199.9V |
-199.9mV to
+199.9mV |
-1999mV to
+1999mV |
0 to 19.99/199.9V | 0 to 199.9/1999mV |
| Input range | 0 to ±20V | 0 to ±200V | 0 to ±200mV | 0 to ±2000mV | 0 to 20/200V | 0 to 200/2000mV |
| Input Frequency | 50 / 60Hz | |||||
| Max continuous Input range | ±19.99V | ±199.9V | ±199.9mV | ±1999mV |
19.99/199.9V |
199.9/1999mV |
| Over range Indication | “Or” for input
> ±19.99V |
“Or” for input
> ±199.9V |
“Or” for input
> ±199.9mV |
“Or” for input
> ±1999mV |
“Or” for input
> 199.9V |
“Or” for input
> 1999mV |
| Resolution | 0.01 | 0.1 | 1 | 0.01/0.1 | 0.1/1 | |
| Electrical connection | 1 Ø – 2 wire
240V AC (± 10%), 50 / 60Hz ; 110V AC (± 10%), 60Hz |
|||||
| Supply Voltage(Vn) | ||||||
| Weight | 170gm | 170gm | 170gm | 170gm | 170gm | 170gm |
| CE and UL Certification | YES | YES | YES | YES | YES | YES |
Product Usage Instructions
Operating Conditions
- Measurement Method: True RMS
- Sampling Rate: 3 samples/second
- Power consumption: 5VA max.
- Measuring input over-voltage: 1.5 x Vn continuous, 2 x Vn (3s)
Environmental Conditions
- Temperature: Up to 95% RH (non-condensing)
- Altitude: Up to 2000 meters
- Pollution degree: II
- Installation Category: III (600V)
- Protection Class: II
- Mounting: Panel mounting
Safety Precautions
All safety-related codifications, symbols, and instructions that appear in this operating manual or on the equipment must be strictly followed to ensure the safety of the operating personnel as well as the instrument. If the equipment is not used in a manner specified by the manufacturer, it might impair the protection provided by the equipment. Do not use the equipment if there is any mechanical damage. Ensure that the equipment is supplied with the correct voltage.
Wiring Guidelines
WARNING
- To prevent the risk of electric shock, the power supply to the equipment must be kept OFF while doing the wiring arrangement.
- Wiring shall be done strictly according to the terminal layout. Confirm that all connections are correct.
- Use lugged terminals.
- To reduce electromagnetic interference use wires with proper shielding.
Installation Guidelines
CAUTION
This equipment, being built-in-type, normally becomes a part of the main control panel and in such cases, the terminals do not remain accessible to the end user after installation and internal wiring.
Ordering Information
Note: For CE and UL-certified products, Add-CE; the -CU suffix to the order code. For example MV15-DC-20V-CU; MV305-CE. For 110V Supply add -110V in order code. For example MV15-DC-20V-110V-CU; MV305-110V-CE.
SAFETY PRECAUTIONS
Safety-related codifications. symbols and instructions that appear in was operating manual or on the equipment must be strict to owed to ensure the safety of the operating personnel as well as the instrument if the equipment is not used in a manner expected by the man a ” mont unfair me protection proved.
- Do not use the cou moment there s any mechanical damage
- ensure mature equipment supplied wins correct Vonage
Read complete instructions prior to installation and operation
Risk of electric shock
The equipment is prox mity to any heating sources. caustic vapors. os. steam or owner unwanted process oy products.
WIRING GUIDELINES / WARNING
- To prevent the risk of electric shock power stop to the equipment must be kept oFF while doing the win no arrangement.
- Winnie shall be done since Accrington is the terminal layout. Use rugged terminals.
- To reduce electromagnetic interference use of wires with adequate ratings and twists of the same in equal size shall be made with the shortest connections
- Layour or connecting cables shall be away tom any informal
- the cave used for connection to the power source must have a crosssectionc0 5mm’#25mm (20°014AWG:75’Ciminis These wires shall have a current carrying capacity of 6A. cooper cable should be used Stranded or Single core cable]
- Before attempting work on the device, ensure the absence of voltages using a voltage detection device
INSTALLATION GUIDELINES
CAUTION This equipment. being built-in-type normally becomes not remain accessible to the end user after installation and internal wiring of the circuitry of the women or else it may lead to a safety hazard that mav n tum endanger e or cause electrical shock to the operator. The limit breaker or main switch must be installed between the power source and supply terminals to facial the power ON function. However, this switch or breaker must be installed in a convenient position nor y access ole to the transformer from the moment. make sure that the current transformer s short-circuited to avoid nsk of electrical shock and injury. The equipment shall not be installed in environmental conditions other than those mentioned in this manual The moment does not have a bu i-in-the fuse. installation of the external fuse of range 2rb Ad U.sAmp for For installing the meter Push the meter into the panel cutout. Secure the meter in its place by pushing the clamp on the rear side. The clamps must be secured in o diagonally opposite slots. For improper sealing. content the screws even with the required internal screw-borne torque.
MAINTENANCE
The equipment should be cleaned regularly to avoid blockage of ventilating parts. Clean the omen with a clean dry of damp cou Do not use any cleaning agent other than water. 037/2-V01 Page 1 0 2 (Specifications are subject to change as development is a continuous process.)
Selec Controls Pvt. Ltd., India
Factory Address: EL-27/1, Electronic Zone, TTC Industrial Area,
MIDC, Mahape, Navi Mumbai – 400 710, INDIA.
Tel. No. : +91-22-28476443 / 1882
Fax No. : +91-22-28471733 I Toll-free: 1800 227 353
Website: www.selec.com Email: sales@selec.com
Documents / Resources
 |
SELEC MV Series Digital Voltmeter with LED Display [pdf] Instruction Manual MV Series Digital Voltmeter with LED Display, Digital Voltmeter with LED Display, Voltmeter with LED Display, LED Display, MV15, MV205, MV305, MV507, MV207, MV2307 |
