SEH USB Dongleserver Pro Device Server Installation Guide

USB Dongleserver Pro Device Server

Specifications

  • Network connector: RJ-45
  • USB ports: 1-8 with LED for the USB port
  • Power supply connector: at the rear side
  • Network connector logical: IEEE 802.3
    (1000BaseT, 100BaseTX and 10BaseT)
  • Device connection:
  • Current input:
  • Power consumption:
  • Operating environment: ambient temperature,
    relative humidity
  • Dimensions: width, height, depth, weight

Product Usage Instructions

Safety Regulations

Before installing and using the dongleserver Pro, please read
and adhere to all safety regulations provided in the user manual to
ensure safe operation.

Hardware Installation

  1. Check the package contents to ensure all items are
    present.
  2. Connect the network connector (RJ-45) at the rear side of the
    dongleserver Pro.
  3. Connect your USB devices to ports 1-8 with the corresponding
    LEDs for each port.
  4. Connect the power supply to the designated power supply
    connector at the rear side.
  5. Ensure proper device connection and placement in your operating
    environment.

Software Installation

Refer to the user manual for detailed instructions on software
installation to enable full functionality of the dongleserver
Pro.

FAQ

1. Do you need assistance with the dongleserver Pro?

If you require any assistance with the installation or operation
of the dongleserver Pro, feel free to contact our support team
during the specified hours for prompt help.

2. What is the purpose of the dongleserver Pro Serviceplus
Package?

The dongleserver Pro Serviceplus Package extends the
manufacturer’s guarantee and provides advance replacement in case
of defects. Visit our website for more information on this
package.

3. How can I ensure safe storage of my dongleserver Pro?

To ensure safe storage, we recommend using the Rack Mount Kit
‘RMK4’, which allows easy installation into server racks. Detailed
information can be found on our website.

“`

USB Dongleserver
dongleserver Pro
Quick Installation Guide
MHAB-QI-dsPro Version: 1.7 | 2025-01

Overview

This ‘Quick Installation Guide’ describes the hardware installation and initial setup of the dongleserver Pro. Table of contents 1. Do you need assistance? Contact us!

Monday to Thursday 8:00 a.m. to 4:45 p.m. and

Friday

8:00 a.m. to 3:15 p.m. (CET)

+49 (0)521 94226-44

support@seh.de

www.seh-technology.com

Customers from the United States of America and Canada please contact the North American support.

Monday to Friday

9:00 a.m. to 5:00 p.m. (EST/EDT)

+1-610-933-2088

support@sehtechnology.com

www.seh-technology.com

Überblick

Dieser ‘Quick Installation Guide’ beschreibt die Hardware-Installation und Inbetriebnahme des dongleserver Pro. Inhaltsverzeichnis 19. Benötigen Sie Hilfe? Kontaktieren Sie uns!

Montag­Donnerstag 8:00­16:45 Uhr

Freitag

8:00­15:15Uhr

+49 (0)521 94226-44

support@seh.de

www.seh.de

Contents
General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Scope of Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 LED Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Type Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Safety Regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Hardware Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Software Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
SEH Product Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 SEH UTN Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Getting Started: SEH UTN Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Starting the SEH UTN Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Finding the UTN Server and Assigning an IP Address . . . . . . . . . . . . . . . .13 Adding the UTN Server to the Selection List . . . . . . . . . . . . . . . . . . . . . . . . .14 Connecting the USB Dongle to the Client . . . . . . . . . . . . . . . . . . . . . . . . . . .15 Configuring the UTN Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Locking the UTN Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Regulatory Compliance Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Open Source Software License Disclaimer and License Texts . . . . . . 41

Quick Installation Guide

[en]

1

General Information

Purpose The USB dongle server ‘dongleserver Pro’ makes non-network-ready USB dongles accessible via TCP/IP network. For this purpose, the USB dongles will be connected to the USB ports of the dongleserver Pro. Then the UTN (UTN = USB to Network) functionality and the corresponding software tool ‘ UTN Manager’ establish a virtual USB connection between USB dongle and client. The USB dongle can be used as if it were connected locally. The dongleserver Pro is configured, monitored and maintained via the ‘dongleserver Control Center’. To keep the USB dongles safe, you can lock the housing cover of the dongleserver Pro.
Scope of Supply Check the package content before getting started:
UTN server ‘dongleserver Pro’

Key

For the lock in the dongle server lid

Quick Installation Guide

The Quick Installation Guide provides a brief description of the installation of the dongleserver Pro. (This document)

Power pack External power pack

2

[en]

Quick Installation Guide

Accessories Value-adding accessories for your dongleserver Pro are optionally available from SEH.

dongleserver Pro Serviceplus Package

The `dongleserver Pro Serviceplus package’ extends the manufacturer’s guarantee of your dongleserver Pro from 36 to 60 months. In addition, you will receive quickly and easily an advance replacement device in case of a defect. Detailed information:
https://www.seh-technology.com/services/ service-packages.html

RMK4 (Rack Mount Kit Type 4)

* This offer is not valid for products purchased in Germany.
For a perfect and safe storage of your dongleserver Pro we recommend the Rack Mount Kit ‘RMK4’. Using the Rack Mount Kit, you can install the dongleserver Pro into 19″ server racks. It provides easy access to the device. Detailed information: https://www.seh-technology.com/products/rack-
mount-kits.html

Quick Installation Guide

[en]

3

Technical Data Network connector (RJ-45)
(at the rear side)

USB ports 1-8 with LED for the USB port

power supply connector
(at the rear side)

1

8

link LED (green)

activity LED (yellow)

reset button

status LED (green)

power LED (green)

restart button

Properties

Values

Network connector logical: IEEE 802.3 (1000BaseT, 100BaseTX and 10BaseT)
physical: 1 × RJ-45 (STP, category 5 or better)

Device connection

· 4 × USB 3.0 SuperSpeed (USB ports 1­4) · 4 × USB 2.0 Hi-Speed (USB ports 5­8)

Current input

· approx. 200 mA at 12 V direct current without load
· approx. 2500 mA at 12 V direct current with full load on the USB ports

Power consumption

· approx. 2.6 W without USB dongles · approx. 4.5 W with 8 USB dongles · typ. approx. 40 kWh/year

Operating environment ambient temperature: relative humidity:

5­40 °C 20­80 %

Dimensions

width: height: depth: weight:

215 mm 45 mm
155 mm 1070 g (with housing cover)

4

[en]

Quick Installation Guide

WARNING Do not operate all USB ports with maximum load! The USB ports are grouped: group 1 = 1, 2, 5, 6 group 2 = 3, 4, 7, 8 Each group can only be loaded with 1.2 A. If this value is exceeded, USB ports will be deactivated until the load is sufficiently reduced. How to fix it: If USB ports have been deactivated, you must decrease the load on the UTN server to be able to use all USB ports again. To do so, remove USB devices. You must re-activate the USB port which has been deactivated. All Information on how to do this can be found in the dongleserver User Manual. The documentation is available via the link on page 9.
Important: If the network connection is interrupted for more than 13 minutes, the dongleserver Pro switches into standby mode. As soon as the network connection is re-established, the dongleserver Pro switches back to normal operating mode.

Quick Installation Guide

[en]

5

LED Display The LEDs of the UTN server provide information about its status.

LED Power

Action

Color Description

permanently off ­

The UTN server is not powered.

permanently on green The UTN server is powered. (Normal operation or standby mode)

Link

permanently off ­

There is no connection to the network.

Activity Status

permanently on blinks at irregular intervals blinks 3 times

green yellow
green

There is a connection to the network. Indicates the exchange of UTN packets.
Indicates the assignment of a Zeroconf IP address.

blinks 2 times green USB port permanently off ­ 1­8

Indicates the assignment of an IP address that does not correspond to 0.0.0.0 or that comes from outside the Zeroconf range. No USB dongle is connected to the respective port.

permanently on green A USB dongle is connected to the respective port.

permanently on orange The connection to the respective port and the attached USB dongle is activated.

Important: When the device starts up, the behavior of the LEDs differs from this description.

Type Plate
The type plate gives important product information, such as hardware and certification information as well as the serial number. The serial number contains the production date: nnn YYYY MM nnnnn. This information helps you e.g. during maintenance and is needed for support requests as well as for the ‘dongleserver Pro Serviceplus Package’ 3.

6

[en]

Quick Installation Guide

Safety Regulations
UTN servers are network devices for use in office environments. The dongleserver Pro is designed for the integration of USB dongles into TCP/IP networks.
Important: Before starting the installation and the initial setup procedure as well during the operation of the UTN server, note the following safety regulations. Their purpose is to protect yourself and others from personal injuries, and to avoid damage to the equipment.
· Read the documentation and make sure that your system meets the requirements listed therein.
· Avoid contact with humidity or liquids. · The device must only be connected and operated if it is in perfect condition. · Make sure that no-one steps on or stumbles over the cables. · If the supplied power cord cannot be used in your country, acquire an appro-
priate power cord that suits national provisions. For more information, consult your retailer. · Do not connect a telephone cable to the RJ-45 connector. The RJ-45 connector may only be connected to SELV voltages. For the connection to the RJ-45 connector only STP cabling (category 5 or better) may be used. The shielding must fit flushly to the connector. · Do not open the housing. Unauthorized modifications to the device can affect the product certification and are forbidden. · Do not put objects on top of the housing. · The device must not be directly connected to outdoor lines. · The device must only be operated using the power pack included in the package. · Only use a certified USB cable (< 3 m) listed at www.usb.org. · Electrostatic discharges (ESD) may impair device performance. · An interruption of the supply voltage may impair device performance or cause malfunctions. · Only connect up to 2 USB devices using a connecting cable to the USB ports of the device. All other USB devices must be directly connected to the USB ports.

Quick Installation Guide

[en]

7

Hardware Installation
You can directly connect up to 8 USB dongles to the dongleserver Pro. clients with software tool ‘SEH UTN Manager’

dongleserver Pro with
USB dongles

UTN connection

network

1. Connect the USB dongle to a USB port of the UTN server. Important: If required, you can connect up to 2 USB dongles via cable with the UTN server. Only use USB cables shorter than 3 meters. All other USB dongles must be directly connected to the USB ports.
2. Repeat step 1 if you want to connect more than one USB dongle. 3. Connect the network cable (RJ-45) to the UTN server. 4. Connect the power cord to the UTN server. The UTN server boots and then is ready for use.

8

[en]

Quick Installation Guide

Software Installation
SEH Product Manager The ‘SEH Product Manager’ is a software tool developed by SEH Computertechnik GmbH for the administration and management of SEH Computertechnik GmbH devices on the network. The software is installed on all clients from which SEH Computertechnik GmbH devices are to be administrated and managed on the network. First, you have to download the installation file for the SEH Product Manager from the website of SEH Computertechnik GmbH:
https://www.seh-technology.com/services/downloads/downloaddongleserver/dongleserver-pro.html

System requirements: ­ For Windows 10, 11, Server 2016 or later ­ The installation can only be carried out by users with administrative rights. 1. Start the SEH Product Manager installer. 2. Follow the installation routine. The SEH Product Manager is installed on your client

­ For macOS 12 (Monterey), 13 (Ventura), 14 (Sonoma), 15 (Sequoia) or later
­ The installation can only be carried out by users with administrative rights.

1. Open the file ,,sehproductmanagermac-x.dmg”.
2. Drag the SEH Product Manager to the Application folder.
The SEH Product Manager is installed on your client.

You can recognize the SEH Product Manager by its icon: . The program is started

with the usual methods of your operating system. The program automatically detects

SEH devices in Online Help’.

the

network.

For

more

information

see

the

‘SEH

Product

Manager

Quick Installation Guide

[en]

9

SEH UTN Manager
The ‘SEH UTN Manager’ is a software tool developed by SEH Computertechnik GmbH. The SEH UTN Manager is used to establish and manage connections to the USB devices connected to UTN servers. The SEH UTN Manager is available in two versions:
· complete version: has a graphical user interface and offers additional features
· minimal version: command-line interface only
A detailed description can be found in the USB Deviceserver User Manual. The SEH UTN Manager has to be installed on all clients that are intended to access a USB device via the network. Different installation files are available, depending on the operating system. First, you have to download the installation file for the SEH UTN Manager from the website of SEH Computertechnik GmbH:
https://www.seh-technology.com/services/downloads/downloaddongleserver/dongleserver-pro.html

System requirements: ­ For Windows 10, 11, Server 2016 or later ­ For ARM64-CPUs with Windows 10, 11 or later ­ For macOS 12 (Monterey), 13 (Ventura), 14 (Sonoma), 15 (Sequoia) or later ­ The installation can only be carried out by users with administrative rights.
Important: The SEH UTN Manager is also available for selected Linux systems. All information necessary for installing and using the SEH UTN Manager in Linux environments can be found in the dongleserver User Manual Linux. The documentation is available via the link given above. 1. Start the installation file. 2. Install the complete version of the SEH UTN Manager (including graphical user interface). To do so, follow the installation routine. The SEH UTN Manager is installed on your client.

10

[en]

Quick Installation Guide

Getting Started: SEH UTN Manager
After the SEH UTN Manager is started, the network has to be scanned for connected UTN servers. The network range to be scanned is freely definable; the search can be effected via multicast and/or in definable IP ranges. The default setting is multicast search in the local network segment. All UTN servers found and their connected USB dongles are displayed in the ‘network list’. To use devices connected to the UTN server, you have to add the UTN server to the ‘selection list’. The devices shown in the selection list can then be administrated and the connected USB dongles can be used. This chapter describes how to do these steps.
· ‘Starting the SEH UTN Manager’ 12 · ‘Finding the UTN Server and Assigning an IP Address’ 13 · ‘Adding the UTN Server to the Selection List’ 14 · ‘Connecting the USB Dongle to the Client’ 15
Detailed information on how to use the SEH UTN Manager can be found in the Online Help. To start the online help, go to the menu bar and select Help ­ Online Help.

Important: Client and UTN server communicate via the UTN port 9200. This port must not be blocked by a security software (firewall). If necessary, you can change the port number and use a secure UTN SSL port. A detailed description can be found in the dongleserver User Manual. The documentation is available via the link on page 9.

Quick Installation Guide

[en]

11

Starting the SEH UTN Manager You recognize the SEH UTN Manager by its icon: with the usual methods of your operating system.

. The program is started

Important: During the initial configuration, client and UTN server must be assigned to the same local network segment.

12

[en]

Quick Installation Guide

Finding the UTN Server and Assigning an IP Address
Once the UTN server is connected to the network, it checks if it gets an IPv4 configuration (IP address, subnet mask, gateway, DNS) dynamically via the boot protocol DHCP. If this is not the case, the UTN server assigns itself an IP address via Zeroconf from the address range reserved for Zeroconf (169.254.0.0/16). The UTN servers found by the program will be displayed in the network list. If required, you can change the TCP/IP parameters of the UTN server.
1. Confirm the note dialog Your Selection List seems to be empty with Yes.
If the note dialog is not available and the main dialog appears instead, select Selection List ­ Edit in the menu bar.
The Edit Selection List dialog appears. 2. In the network list, select the UTN server. 3. In the shortcut menu, select Set IP Address.
The Set IP Address dialog appears. 4. Enter the relevant TCP/IP parameters. 5. Click OK. The settings will be saved.

Quick Installation Guide

[en]

13

Adding the UTN Server to the Selection List
The selection list displays the UTN servers and the USB devices or USB dongles connected to their USB ports. Define the devices you want to use. To do this, you must add the UTN server including the connected USB devices or USB dongles shown in the network list to the selection list. 1. In the menu bar, select Selection List ­ Edit.
The Edit Selection List dialog appears. 2. In the network list, select the UTN server. 3. Click Add. 4. Repeat steps 2 to 3, if necessary. 5. Click OK. The UTN servers and the connected USB devices or USB dongles are dis-
played in the selection list.

You can extend the search for UTN servers to any network range. To do this, change the search parameters for the network scan. Windows: Via Program ­ Options. Mac: Via SEH UTN Manager ­ Preferences.

14

[en]

Quick Installation Guide

Connecting the USB Dongle to the Client To use a USB dongle, a point-to-point connection is established between the client and the USB port of the UTN server to which the USB dongle is connected. The USB dongle can then be used as if it were directly connected to the client. The USB port is shown in the selection list 14. All provisions (driver installation, etc.) necessary to operate the USB dongle
locally (i.e. connected directly to the client) have been met on the client. Ideally, the USB dongle has been connected and operated on the client locally according to the instructions of the manufacturer. The USB port is not connected to another client.
1. In the selection list, select the port. 2. In the menu bar, select Port ­ Activate. The connection between the USB dongle and client is established.

Important: If a USB dongle is connected to a client, the connection is of a point-to-point type. As long as the connection is established, other users cannot connect the USB dongle to their client and thus cannot use it. For this reason, you have to cut the connection once you do not use the USB device any longer. To do this, select Port ­ Deactivate from the menu bar.

Quick Installation Guide

[en]

15

Configuring the UTN Server
The UTN server has a user interface, the dongleserver Control Center, which can be opened in an Internet browser (Microsoft Edge or Safari). The UTN server can be configured, monitored, and maintained via the dongleserver Control Center. 1. Open your browser. 2. Enter the IP address of the UTN server as the URL. The dongleserver Control Center appears in the browser.
Important: If the dongleserver Control Center is not displayed, check if a gateway is configured (13) and check the proxy settings of your browser.

Detailed information about the configuration of the UTN server can be found in the Online Help of the dongleserver Control Center. To start the Online Help, click the ‘?’ icon.

16

[en]

Quick Installation Guide

Locking the UTN Server
The dongleserver Pro has a lockable lid. With it, you can protect the USB dongles. To lock it, insert the straps of the lid into the notches of the housing. The key for the lock is delivered with the dongleserver Pro 2.

Quick Installation Guide

[en]

17

Inhalt
Allgemeine Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Verwendungszweck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Lieferumfang . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Optionales Zubehör . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 Technische Daten . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 LED-Anzeige . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 Typenschild . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Sicherheitsvorschriften . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 Hardware-Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 Software-Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
SEH Product Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 SEH UTN Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 Erste Schritte mit dem SEH UTN Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 SEH UTN Manager starten . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 UTN-Server finden und eine IP-Adresse zuweisen . . . . . . . . . . . . . . . . . . . . . . . .31 UTN-Server der Auswahlliste hinzufügen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 USB-Dongle mit Client verbinden . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 UTN-Server konfigurieren . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34 UTN-Server abschließen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35 Regulatory Compliance Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 Open Source Software License Disclaimer and License Texts . . . . . . . . . . .41

19

[de]

Quick Installation Guide

Allgemeine Information

Verwendungszweck Der USB-Dongleserver ‘dongleserver Pro’ stellt nicht-netzwerkfähige USBDongles via TCP/IP-Netzwerk bereit. Dazu werden die USB-Dongles an die USB-Ports des dongleserver Pro angeschlossen. Anschließend wird mithilfe der UTN-Funktionalität (UTN = USB to Network) und dem dafür entwickelten Software-Tool ‘UTN Manager’ eine virtuelle USB-Verbindung zwischen USB-Dongle und Client hergestellt. Der USB-Dongle kann wie lokal angeschlossen verwendet werden. Die Konfiguration, Überwachung und Wartung des dongleserver Pro erfolgen über das ‘dongleserver Control Center’. Um die USB-Dongles sicher aufzubewahren, können Sie den Gehäusedeckel des dongleserver Pro abschließen.
Lieferumfang Überprüfen Sie den Packungsinhalt auf Vollständigkeit, bevor Sie die Installation beginnen:
UTN-Server ‘dongleserver Pro’

Schlüssel

Für das Schloss im Dongleserver-Deckel

Quick Installation Guide Netzteil

Der Quick Installation Guide beinhaltet eine kurze Beschreibung der Installation des dongleserver Pro. (Dieses Dokument) Externes Netzteil

Quick Installation Guide

[de]

20

Optionales Zubehör Als praktische Ergänzung zu Ihrem dongleserver Pro bietet SEH optional erhältliches Zubehör an.

SEH CarePack Wartungsvertrag*

Der SEH CarePack Wartungsvertrag* bietet umfangreiche Serviceleistungen, u. a. erhalten Sie im Falle eines Defektes bequem und schnell ein Vorab-Austausch-Gerät. Ausführliche Informationen: https://www.seh-technology.com/de/produkte/
seh-carepack/dongleserver-pro.html

RMK4 (Rack Mount Kit Type 4)

* Dieses Angebot gilt ausschließlich für in Deutschland erworbene Produkte.
Für die optimale und sichere Aufbewahrung Ihres dongleserver Pro empfehlen wir den Montagesatz ‘RMK4’. Der Montagesatz ermöglicht den Einbau des dongleserver Pro in 19-Zoll-Serverschränke und dort einen bequemen Zugang zum Gerät. Ausführliche Informationen: https://www.seh-technology.com/de/produkte/
rack-mount-kits.html

21

[de]

Quick Installation Guide

Technische Daten Netzwerkanschluss (RJ-45)
(auf der Rückseite)

USB-Ports 1­8 mit LED für den USB-Port

Anschluss für Stromversorgung
(auf der Rückseite)

1

8

Link-LED (grün)

Activity-LED (gelb)

Status-LED (grün)

Reset-Taster Power-LED
(grün)

Restart-Taster

Eigenschaften

Werte

Netzwerkanschluss Logisch: IEEE 802.3 (1000BaseT, 100BaseTX und 10BaseT) Physisch: 1 × RJ-45 (STP, Kategorie 5 oder besser)

Geräteanschluss

· 4 × USB 3.0 SuperSpeed (USB-Ports 1­4) · 4 × USB 2.0 Hi-Speed (USB-Ports 5­8)

Stromaufnahme

· 200 mA bei 12 V Gleichspannung ohne Last · 2500 mA bei 12 V Gleichspannung bei Volllast
auf den USB-Ports

Leistungsaufnahme

· ca. 2,6 W ohne USB-Dongles · typ. ca. 4,5 W mit 8 USB-Dongles · typ. ca. 40 kWh/Jahr

Betriebsumgebung

Umgebungstemperatur: 5­40 °C Relative Luftfeuchtigkeit: 20­80%

Abmessungen

Breite: Höhe: Tiefe:

215 mm 45 mm
155 mm

Gewicht: 1070 g (mit Gehäusedeckel)

Quick Installation Guide

[de]

22

WARNUNG Betreiben Sie nicht alle USB-Ports mit maximaler Last! Die USB-Ports sind in Gruppen eingeteilt: Gruppe 1 = 1, 2, 5, 6 Gruppe 2 = 3, 4, 7, 8 Eine Gruppe kann jeweils nur mit 1,2 A belastet werden. Wird dieser Wert überschritten, werden ausreichend USB-Ports abgeschaltet bis der Wert unterschritten ist. Fehlerbehebung: Wurden USB-Ports abgeschaltet, müssen Sie die Belastung am UTN-Server senken um wieder alle USBPorts nutzen zu können. Entfernen Sie dazu USB-Geräte. Den abgeschalteten USB-Port müssen Sie wieder einschalten. Alle Informationen dazu finden Sie in der dongleserver-Benutzerdokumentation. Die Dokumentation finden Sie unter dem Link auf Seite 27.
Wichtig: Ist die Netzwerkverbindung für mehr als 13 Minuten unterbrochen, wechselt der dongleserver Pro in den Standby-Modus. Sobald die Netzwerkverbindung wieder hergestellt wird, wechselt der dongleserver Pro zurück in den aktiven Betrieb.

23

[de]

Quick Installation Guide

LED-Anzeige Durch die Interpretation des LED-Leuchtverhaltens kann der Zustand des UTNServers ermittelt werden.

LED Power

Aktion Dauer-Aus

Farbe ­

Beschreibung Der UTN-Server wird nicht mit Strom versorgt.

Dauer-An

Link

Dauer-Aus

grün ­

Der UTN-Server wird mit Strom versorgt. (Betrieb oder Standby-Modus) Es besteht keine Verbindung zum Netzwerk.

Dauer-An

grün

Activity Status

unregelmäßiges gelb Blinken

3 x Blinken

grün

Es besteht eine Verbindung zum Netzwerk. Signalisiert den Austausch von UTNDatenpaketen. Signalisiert die Vergabe einer Zeroconf-IP-Adresse.

2 x Blinken USB-Port Dauer-Aus 1­8

grün ­

Signalisiert die Vergabe einer IPAdresse, die nicht 0.0.0.0 entspricht oder aus dem Bereich Zeroconf kommt. Es ist kein USB-Dongle am betreffenden Port angeschlossen.

Dauer-An

grün Es ist ein USB-Dongle am betreffenden Port angeschlossen.

Dauer-An

orange Die Verbindung zum betreffenden Port und dem daran angeschlossenen USB-Dongle ist aktiviert.

Wichtig: Während des Einschaltvorgangs weicht das LEDLeuchtverhalten von der Beschreibung ab.

Typenschild
Auf dem Typenschild finden Sie wichtige Angaben zu Ihrem Produkt, wie z.B. Informationen zur Hardware und zu Zertifizierungen sowie die Seriennummer. Die Seriennummer enthält das Produktionsdatum: nnn YYYY MM nnnnn. Diese Angaben helfen Ihnen z.B. bei der Wartung und Sie benötigen sie für Support-Anfragen sowie für das ‘SEH CarePack Wartungsvertrag*’ 21.

Quick Installation Guide

[de]

24

Sicherheitsvorschriften

UTN-Server sind Netzwerkgeräte für den Gebrauch in Büroumgebungen. Der dongleserver Pro dient dem Einbinden von USB-Dongles in TCP/IP-Netzwerken.
Wichtig: Beachten Sie vor Inbetriebnahme und beim Betrieb des UTN-Servers die folgenden Sicherheitsvorschriften, um sich und andere vor Personenschäden zu schützen sowie Beschädigungen am Gerät zu vermeiden.
· Lesen Sie die Dokumentation und stellen Sie sicher, dass Ihr System den aufgeführten Anforderungen entspricht.
· Das Gerät darf nicht mit Feuchtigkeit oder Flüssigkeit in Berührung kommen. · Das Gerät darf nur in unversehrtem Zustand angeschlossen und betrieben
werden. · Verlegen Sie alle Kabel so, dass niemand darauf treten oder darüber stolpern
kann. · Falls das beiliegende Netzkabel für Ihr Land nicht einsetzbar ist, beschaffen
Sie ein passendes Netzkabel mit der jeweiligen nationalen Zulassung. Fragen Sie hierzu Ihren Fachhändler. · Schließen Sie keine Telefonleitungen an den RJ-45-Stecker an. An diesen darf nur Sicherheitskleinspannung angeschlossen werden. Verwenden Sie für den Anschluss an den RJ-45-Stecker nur STP-Kabel (Kategorie 5 oder besser). Kabelschirm und Steckerschirm des Kabels müssen flächig verbunden sein. · Öffnen Sie nicht das Gehäuse. Eigenmächtige konstruktive Veränderungen am Gerät können die Produktzertifizierung beeinträchtigen und sind verboten. · Stellen Sie keine Gegenstände auf das Gehäuse. · Das Gerät darf nicht direkt an Leitungen die im Freien verlegt sind (outdoor) angeschlossen werden. · Das Gerät darf nur mit dem mitgelieferten Netzteil betrieben werden. · Verwenden Sie als USB-Kabel ein zertifiziertes USB-Kabel (< 3 m), das unter www.usb.org gelistet ist. · Elektrostatische Entladungen (ESD) können die Geräteleistung beeinträchtigen. · Eine Unterbrechung der Versorgungsspannung kann die Geräteleistung beeinträchtigen oder Fehlfunktionen verursachen. · Schließen Sie maximal 2 USB-Geräte über Anschlusskabel an die USB-Ports des Gerätes an. Alle anderen USB-Geräte müssen direkt an die USB-Ports angeschlossen werden.

25

[de]

Quick Installation Guide

Hardware-Installation
Am dongleserver Pro können bis zu 8 USB-Dongles direkt angeschlossen werden.
Clients mit Software-Tool ‘SEH UTN Manager’

dongleserver Pro mit
USB-Dongles

UTN-Verbindung

Netzwerk

1. Stecken Sie den USB-Dongle an einen USB-Port des UTN-Servers. Wichtig: Bei Bedarf können Sie bis zu 2 USB-Dongles via USBKabel mit dem UTN-Server verbinden. Verwenden Sie hierzu ausschließlich USB-Kabel mit Längen unter 3 Metern. Alle anderen USB-Dongles müssen direkt an die USBPorts angeschlossen werden.
2. Wiederholen Sie Schritt 1 je nach Anzahl der anzuschließenden USB-Dongles.
3. Verbinden Sie das Netzwerkkabel (RJ-45) mit dem UTN-Server. 4. Verbinden Sie das Netzkabel mit dem UTN-Server. Der UTN-Server startet und ist anschließend betriebsbereit.

Quick Installation Guide

[de]

26

Software-Installation
SEH Product Manager Der ‘SEH Product Manager’ ist ein von SEH Computertechnik GmbH entwickeltes Software-Tool zur Administration und Verwaltung von SEH Computertechnik GmbH-Geräten im Netzwerk. Die Software wird auf allen Clients installiert, von denen aus SEH Computertechnik GmbH-Geräte im Netzwerk administriert und verwaltet werden sollen. Laden Sie zuerst die Installationsdatei für den SEH Product Manager von der SEH Computertechnik GmbH-Homepage:
https://www.seh-technology.com/de/service/downloads/downloaddongleserver/dongleserver-pro.html

Systemvoraussetzungen: ­ Für Windows 10, 11, Server 2016 oder höher ­ Die Installation kann ausschließlich durch Benutzer mit administrativen
Rechten durchgeführt werden. 1. Starten Sie die SEH Product Manager-Installationsdatei. 2. Folgen Sie der Installationsroutine. Der SEH Product Manager ist auf Ihrem Client installiert.
­ Für macOS 12 (Monterey), 13 (Ventura), 14 (Sonoma), 15 (Sequoia) oder höher
­ Die Installation kann ausschließlich durch Benutzer mit administrativen Rechten durchgeführt werden.
1. Öffnen Sie die Datei ,,sehproductmanager-mac-x.dmg.”
2. Verschieben Sie den SEH Product Manager in den Ordner Programme.
Der SEH Product Manager ist auf Ihrem Client installiert.
Sie erkennen den SEH Product Manager an seinem Icon: . Er wird wie auf Ihrem Betriebssystem üblich gestartet. Das Programm erkennt automatisch die SEH-Geräte im Netzwerk. Für mehr Informationen ‘SEH Product Manager Online Hilfe’.

27

[de]

Quick Installation Guide

SEH UTN Manager
Der ‘SEH UTN Manager’ ist ein von SEH Computertechnik GmbH entwickeltes Software-Tool. Mit dem SEH UTN Manager werden Verbindungen zu den USBGeräten bzw. USB-Dongles an UTN-Servern hergestellt und verwaltet. Der SEH UTN Manager ist in zwei Varianten verfügbar:
· Vollständige Variante: verfügt über eine grafische Bedienoberfläche und bietet zusätzliche Funktionen
· Minimal-Variante: reine Kommandozeilen-Version
Detaillierte Beschreibungen finden Sie in der dongleserver-Benutzerdokumentation. Der SEH UTN Manager muss auf allen Clients installiert werden, die auf einen im Netzwerk bereitgestellten USB-Dongle zugreifen sollen. Je nach Betriebssystem sind verschiedene Installationsdateien verfügbar. Laden Sie zuerst die Installationsdatei für den SEH UTN Manager von der SEH Computertechnik GmbH-Homepage:
https://www.seh-technology.com/de/service/downloads/downloaddongleserver/dongleserver-pro.html

Systemvoraussetzungen: ­ Für Windows 10, 11, Server 2016 oder höher ­ Für ARM64-CPUs mit Windows 10, 11 oder höher ­ Für macOS 12 (Monterey), 13 (Ventura), 14 (Sonoma), 15 (Sequoia) oder
höher ­ Die Installation kann ausschließlich durch Benutzer mit administrative Recht-
en durchgeführt werden.
Wichtig: Der SEH UTN Manager ist auch für ausgewählte LinuxSysteme verfügbar. Alle Informationen für die Installation und den Einsatz in Linux-Umgebungen finden Sie in der dongleserverBenutzerdokumentation Linux. Die Dokumentation finden Sie unter dem oben angegebenen Link. 1. Starten Sie die Installationsdatei. 2. Installieren Sie die vollständige Version des SEH UTN Managers (inkl. grafischer Benutzeroberfläche). Folgen Sie hierzu der Installationsroutine. Der SEH UTN Manager ist auf Ihrem Client installiert

Quick Installation Guide

[de]

28

Erste Schritte mit dem SEH UTN Manager
Nach dem Start des SEH UTN Managers muss zunächst im Netzwerk nach angeschlossenen UTN-Servern gesucht werden. Der zu scannende Netzwerkbereich ist frei definierbar; es kann über Multicast und/oder in freidefinierbaren IP-Bereichen gesucht werden. Voreingestellt ist die Multicastsuche in dem lokalen Netzwerksegment. Alle gefundenen UTN-Server und deren angeschlossene USB-Dongles werden in der ‘Netzwerkliste’ angezeigt. Um die an einen UTN-Server angeschlossenen Geräte zu verwenden, müssen Sie den UTN-Server zur ‘Auswahlliste’ hinzufügen. Die in der Auswahlliste aufgeführten Geräte können dann administriert und die angeschlossenen USB-Dongles verwendet werden. Dieses Kapitel beschreibt wie Sie diese Schritte durchführen.
· ‘SEH UTN Manager starten’ 30 · ‘UTN-Server finden und eine IP-Adresse zuweisen’ 31 · ‘UTN-Server der Auswahlliste hinzufügen’ 32 · ‘USB-Dongle mit Client verbinden’ 33
Detaillierte Informationen zur Bedienung des SEH UTN Managers entnehmen Sie der Online Hilfe. Um die Online Hilfe zu starten, wählen Sie im Menü Hilfe den Befehl Online Hilfe.

Wichtig: Client und UTN-Server kommunizieren über den UTNPort 9200. Dieser Port darf nicht durch eine Sicherheitssoftware (Firewall) blockiert werden. Bei Bedarf kann die Portnummer geändert und ein sicherer UTN-SSL-Port verwendet werden. Detaillierte Beschreibungen finden Sie in der dongleserverBenutzerdokumentation. Die Dokumentation finden Sie unter dem Link auf Seite 27.

29

[de]

Quick Installation Guide

SEH UTN Manager starten Sie erkennen den SEH UTN Manager an seinem Icon: Betriebssystem üblich gestartet.

. Er wird wie auf Ihrem

Wichtig: Während der Erstkonfiguration müssen Client und UTNServer demselben lokalen Netzwerksegment zugeordnet sein.

Quick Installation Guide

[de]

30

UTN-Server finden und eine IP-Adresse zuweisen
Nachdem der UTN-Server an das Netzwerk angeschlossen ist, überprüft der UTN-Server, ob er eine IPv4-Netzwerkkonfiguration (IP-Adresse, Netzmaske, Gateway, DNS) dynamisch über das Protokoll DHCP erhält. Ist das nicht der Fall, gibt sich der UTN-Server über Zeroconf selbst eine IP-Adresse aus dem für Zeroconf reservierten Adressbereich (169.254.0.0/16). Die vom Programm gefundenen UTN-Server werden in der Netzwerkliste angezeigt. Bei Bedarf können Sie die TCP/IP-Parameter am UTN-Server ändern.
1. Bestätigen Sie den Hinweisdialog Auswahlliste ist leer mit Ja.
Falls kein Hinweisdialog vorhanden ist und der Hauptdialog angezeigt wird, wählen Sie im Menü Auswahlliste den Befehl Bearbeiten.
Der Dialog Auswahlliste bearbeiten erscheint. 2. Markieren Sie den UTN-Server in der Netzwerkliste. 3. Wählen Sie im Kontextmenü IP-Adresse definieren.
Der Dialog IP-Adresse definieren erscheint. 4. Geben Sie die entsprechenden TCP/IP-Parameter ein. 5. Wählen Sie die Schaltfläche OK an. Die Einstellungen werden gespeichert.

31

[de]

Quick Installation Guide

UTN-Server der Auswahlliste hinzufügen
Die Auswahlliste zeigt die UTN-Server und die an ihre USB-Ports angeschlossenen USB-Geräte bzw. USB-Dongles an. Definieren Sie die Geräte, die Sie nutzen möchten. Fügen Sie hierzu den in der Netzwerkliste angezeigten UTN-Server mitsamt seinen angeschlossenen USBGeräten bzw. USB-Dongles der Auswahlliste hinzu. 1. Wählen Sie im Menü Auswahlliste den Befehl Bearbeiten.
Der Dialog Auswahlliste bearbeiten erscheint. 2. Markieren Sie den UTN-Server in der Netzwerkliste. 3. Wählen Sie die Schaltfläche Hinzufügen an. 4. Wiederholen Sie die Schritte 2­3 nach Bedarf. 5. Wählen Sie die Schaltfläche OK an. Die UTN-Server mitsamt den angeschlossenen USB-Geräten bzw. USB-Don-
gles werden in der Auswahlliste angezeigt.

Die Suche nach UTN-Servern kann auf beliebige Netzwerkbereiche erweitert werden. Ändern Sie hierzu die Suchparameter für den Netzwerkscan. Windows: Im Menü Programm über den Dialog Optionen. Mac: Im Menü SEH UTN Manager über den Dialog Einstellungen.

Quick Installation Guide

[de]

32

USB-Dongle mit Client verbinden Um einen USB-Dongle zu nutzen, wird eine Punkt-zu-Punkt-Verbindung hergestellt zwischen dem Client und dem USB-Port des UTN-Servers, an den der USB-Dongle angeschlossen ist. Der USB-Dongle kann dann so genutzt werden, als ob er direkt am Client angeschlossen wäre. Der USB-Port wird in der Auswahlliste angezeigt 32. Auf dem Client sind alle Vorbereitungen (Treiberinstallation usw.) getroffen
worden, die notwendig wären, um den USB-Dongle lokal (also direkt an dem Client angeschlossen) zu betreiben. Idealerweise ist der USB-Dongle zuvor lokal am Client nach der Anleitung des Herstellers angeschlossen und betrieben worden. Der USB-Port ist nicht bereits mit einem anderen Client verbunden.
1. Markieren Sie in der Auswahlliste den Port. 2. Wählen Sie im Menü Port den Befehl Aktivieren. Die Verbindung zwischen USB-Dongle und Client wird hergestellt.

Wichtig: Wenn ein USB-Dongle mit einem Client verbunden ist, besteht eine Punkt-zu-Punkt-Verbindung. Solange diese Verbindung besteht, kann kein anderer Benutzer den USB-Dongle mit seinem Client verbinden und nutzen. Trennen Sie daher die Verbindung, sobald Sie das USBGerät nicht mehr benötigen. Wählen Sie hierzu im Menü Port den Befehl Deaktivieren.

33

[de]

Quick Installation Guide

UTN-Server konfigurieren
Der UTN-Server verfügt über eine Benutzeroberfläche, das dongleserver Control Center, welches Sie in einem Internet-Browser (z.B. Microsoft Edge oder Safari) aufrufen. Über das dongleserver Control Center kann der UTN-Server konfiguriert, überwacht und gewartet werden. 1. Öffnen Sie Ihren Browser. 2. Geben Sie als URL die IP-Adresse des UTN-Servers ein. Das dongleserver Control Center wird im Browser dargestellt.
Wichtig: Falls das dongleserver Control Center nicht angezeigt wird, überprüfen Sie ob ein Gateway konfiguriert ist (31) sowie die Proxy-Einstellungen des Browsers.

Detaillierte Informationen zur Konfiguration des UTN-Servers entnehmen Sie der Online Hilfe des dongleserver Control Centers. Um die Online Hilfe zu starten, wählen Sie das ‘?’ Symbol an.

Quick Installation Guide

[de]

34

UTN-Server abschließen
Der dongleserver Pro hat einen abschließbaren Gehäusedeckel. Damit können Sie die USB-Dongles schützen. Zum Schließen führen Sie die Laschen des Gehäusedeckels in die Nuten des Gehäuses ein. Der Schlüssel für das Schloss liegt dem Lieferumfang des dongleserver Pro bei 20.

35

[de]

Quick Installation Guide

Regulatory Compliance Information
Important: The latest version of the EC declaration of conformity can be downloaded from the website of SEH Computertechnik GmbH:
http://www.seh-technology.com/services/ ce-notifications.html

Quick Installation Guide

36

37

Quick Installation Guide

Quick Installation Guide

38

39

Quick Installation Guide

Entsorgung von Elektro- und Elektronikgeräten
Das Elektro- und Elektronikgerätegesetz (ElektroG) enthält eine Vielzahl von Anforderungen an den Umgang mit Elektro- und Elektronikgeräten. Für SEH-Produkte ist das Folgende relevant.
Getrennte Entsorgung von SEH-Produkten SEH-Produkte, die zu Abfall geworden sind, gehören insbesondere nicht in den Hausmüll, sondern in spezielle Sammel- und Rückgabesysteme. Besitzer dieser SEH-Produkte haben diese einer vom unsortierten Siedlungsabfall getrennten Entsorgung zuzuführen.
Möglichkeiten der Entsorgung von SEH-Produkten Besitzer von SEH-Produkten aus privaten Haushalten können diese bei den Sammelstellen der öffentlich-rechtlichen Entsorgungsträger oder bei den von Herstellern oder Vertreibern im Sinne des ElektroG eingerichteten Rücknahmestellen unentgeltlich entsorgen.
Datenschutz-Hinweis SEH-Produkte enthalten häufig sensible personenbezogene Daten. Bitte beachten Sie in Ihrem eigenen Interesse, dass für die Löschung der Daten auf den zu entsorgenden SEH-Produkten jeder Endnutzer selbst verantwortlich ist.
Bedeutung des Symbols ,,durchgestrichene Mülltonne” Das auf Elektro- und Elektronikgeräten regelmäßig abgebildete Symbol einer durchgestrichenen Mülltonne weist darauf hin, dass das jeweilige Gerät am Ende seiner Lebensdauer getrennt vom unsortierten Siedlungsabfall zu entsorgen ist.

Quick Installation Guide

Hersteller-Informationen gemäß § 18 Abs. 4 ElektroG (neu) 40

Open Source Software License Disclaimer and License Texts
This product was developed by SEH Computertechnik GmbH and contains and uses software which is licensed under the terms of various Open Source software licenses. All information including disclaimer and licenses can be found in the device’s web-based user interface, the Fiskal-Server Control Center, on the page ‘Open Source Software’ (http://<IP address> /opensrc_en.html).

41

Quick Installation Guide

Quick Installation Guide

42

Manufacturer: SEH Computertechnik GmbH Suedring 11 33647 Bielefeld, Germany Phone: +49 (0)521 94226-29 Fax: +49 (0)521 94226-99 Support: +49 (0)521 94226-44 Email: info@seh.de Web: http://www.seh.de
Important Internet Resources: Support Contacts and Information: http://www.seh-technology.com/services/support.html Sales Contacts and Information: http://www.seh-technology.com/company/management-and-staff/seh-salesteam.html Downloads: http://www.seh-technology.com/services/downloads.html
Recycling notes according to the Electric and Electronic Equipment Act as well as the European directive ‘WEEE’. Dispose of the device separately at the end of its life cycle. Do not dispose of the product together with your domestic waste. You can return the device free of charge to your local collection point. Das Symbol des durchgestrichenen Mülleimers besagt, dass dieses Elektro- bzw. Elektronikgerät am Ende seiner Lebensdauer nicht im Hausmüll entsorgt werden darf, sondern vom Endnutzer einer getrennten Sammlung zugeführt werden muss. Zur Rückgabe stehen in Ihrer Nähe kostenfreie Sammelstellen für Elektroaltgeräte sowie ggf. weitere Annahmestellen für die Wiederverwendung der Geräte zur Verfügung.
© 2025 SEH Computertechnik GmbH All trademarks, registered trademarks, logos and product names are property of their respective owners. The contents of this document are subject to change without notification. This product uses ‘Open Source Software’. For further information, go to http://www.seh-technology.com/services/licenses.html. The product documentation gives you valuable information about your product. Keep the documentation for further reference during the life cycle of the product.

Documents / Resources

SEH USB Dongleserver Pro Device Server [pdf] Installation Guide
USB Dongleserver Pro Device Server, Dongleserver Pro Device Server, Pro Device Server, Device Server

References

Leave a comment

Your email address will not be published. Required fields are marked *