Seenda Technology SM001 Type C Wireless Mouse
Product Information
Specifications
- Product Name: Receiver SM001
- Product Size: 18.5*12.1*6.1mm
- Effective Transmission Distance: Within 10 meters
- Applicable System: Windows, Mac OS
- Connection Type: 2.4G
Product Usage Instructions
- Turn on the product power switch.
- Take out the USB receiver from the receiver hole on the bottom of the product.
- Plug the USB receiver into your computer’s USB port.
- Press the 2.4G model on the mouse to switch to the 2.4G channel. The channel light will be on, indicating a successful connection.
Specifications
- Product Size: 18.5*12.1*6.1mm
- Effective transmission distance: Within 10 meters
- Applicable system: Windows、Mac OS
2.4G Connection
- Turn on the product power switch.
- Take out the USB receiver from the receiver hole on the bottom of the product.
- Plug the USB receiver into your computer s USB port.
- Press the 2.4G model on the mouse to switch to the 2.4G channel, the channel light will be on, and then the mouse will be successfully connected.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference,
- This device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
IC Warning
This device complies with Innovation, Science and Economic Development Canada’s licenceexempt RSS standard(s). Operation is subject to the following two conditions:
- This device may not cause interference
- This device must accept any interference, including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
The device has been evaluated to meet general RF exposure requirements.
The device can be used in portable exposure conditions without restriction.
FAQ
- Q: What should I do if my mouse does not connect after following the steps?
- A: If your mouse does not connect, try reinserting the USB receiver into a different USB port on your computer.
- Make sure the power switch on the product is turned on and that the mouse is in 2.4G mode.
Documents / Resources
 |
Seenda Technology SM001 Type C Wireless Mouse [pdf] Instructions 2BDJR-SM001, 2BDJRSM001, sm001, SM001 Type C Wireless Mouse, SM001, Type C Wireless Mouse, Wireless Mouse |