SECURE Side Entry Support Strap Installation Guide

SECURE Side Entry Support Strap Installation Guide

(1) Place your ramp in position in the side door of your vehicle.

(2) Position the silver ramp hook over the long slot at the unsupported corner of the ramp (the other corner rests on the car seat).

(3) Insert the ramp hook into the slot.

(4) Rotate the hook into position as shown.

(5) Place the large black hook at the other end of the strap over the car door window frame as shown.

(6) Lift the tab on the adjustment buckle to change the length of the strap, and relock to secure the strap.

(7) The strap should now be supporting the corner of the ramp, preventing it from tipping.

Read More About This Manual & Download PDF: