Secop HTK70AA Compressor Data Sheet User Manual

Secop HTK70AA Compressor Data Sheet

Product Specifications

• Model Designation: HTK70AA
• Compressor: 220-240V/50Hz 1~
• Sales Code: 16125300
• Refrigerant(s): R600a
• Displacement: –
• Compressors on Pallet: –

Components in Single Pack HTK70AA 220-240V 50Hz RSIR

• Title: Compressor HTK70AA
• Code: 16125300
• Amount: 1

Instructions

Single Packs

Single Pack HTK70AA 220-240V 50Hz RSIR
Single pack code number: 195B4530

• Secop GmbH
  • Lise-Meitner-Straße 29
  • 24941 Flensburg, Germany
  • Tel: +49 461 4941 0
  • www.secop.com
• Secop accepts no responsibility for possible errors in catalogs, brochures, and other printed material. Secop reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary to specifications already agreed. All trademarks in this material are the property of the respective companies. Secop and the Secop logotype are trademarks of Secop GmbH. All rights reserved.

General – Configurations with HTK7 AA

Electrical data – Configurations with HTK7 AA

Compressor dimensions

Housing                             A Height                             166mm / 6,54in

Compressor fixation

• Mounting accessories                                                                      order code
• 4ZN with rubber grommet                                                              772N
• 4ZN with rubber grommet and sleeve for M6                              768N
• Bolt joint kit                                                                                      4ZN + 118-1917 (18)
• 4ZN with Snap on kit                                                                     776N

Application notes

• Provision for PE Grounding is located at the PE Stamp on the compressor
• Housing with dip-tray fixture (omega bracket).
• Various options of connectors are possible – please contact SECOP-Sales.

Configuration

• Motorconfiguration RSIR
• Power supply (nominal) 220-240V/50Hz 1 ~
• Refrigerant R600a
• Application LBP
• Voltage range 187-264V
• Starting torque LST
• Approvals VDE

Ambient/ machine room temperatures minimum/maximum

• Ambient temperature range: 10 – 43°C / 50 – 110°F
• Machine room temperature range: 10 – 48°C / 50 – 119°F
• Compressor cooling: static

Operation pressure range

Electrical accessories / wiring diagram

Components

• terminal board (PTC, 4.8mm) 15163800
• b cover terminal board 10636401
• cable clamp 11341000
• screw – uni6954 10636000
• screw – uni6954 10636200
• screw uni en iso 4757 10641201

Alternative components

• terminal board (PTC, 6.3mm) 15162300

Optimization + standard conditions

Configuration

• Motorconfiguration RSIR
• Power supply (nominal) 220-240V/50Hz 1 ~
• Refrigerant R600a
• Application LBP
• Voltage range 187-264V
• Starting torque LST
• Approvals VDE

Ambient/ machine room temperatures minimum/maximum

• Ambient temperature range: 10 – 43°C / 50 – 110°F
• Machine room temperature range: 10 – 48°C / 50 – 119°F
• Compressor cooling: static

Operation pressure rangeElectrical accessories / wiring diagram

Components

• terminal board (PTC, 4.8mm) 15163800
• run capacitor (3uF, 4.8mm) 10692902
• b cover terminal board 10636401
• cable clamp 11341000
• screw – uni6954 10636000
• screw – uni6954 10636200

Alternative components

• terminal board (PTC, 6.3mm) 15162300
• run capacitor (4uF, 6.3mm) 15186801

Optimization + standard conditions

K-Series Compressors GTK, HKK, HMK, HTK, HXK, HZK

Installation Steps

1. Clip steel pin (Code: 10633900) into position 2.
2. Insert washers (Code: 10634100) into positions 3, 4, 5, and 6.
3. Screw cable clamps (Code: 10636200) into positions 7 and 8.
4. Attach the cover (Code: 10636401) to position 9.
5. Secure the earth screw (Code: 10641201) in position 10.
6. Place the rubber grommet (Code: 11322600) in position 11.
7. Insert the cable clamp (Code: 11341000) into position 12.
8. Connect the terminal board (Code: 15163800) with a 4.8mm terminal.

Maintenance

• Ensure to check and clean the compressor regularly to maintain optimal performance.

Secop accepts no responsibility for possible errors in catalogs, brochures, and other printed material. Secop reserves the right to alter its products without notice. This also applies to products already on order
provided that such alterations can be made without sub sequential changes being necessary to specifications already agreed. All trademarks in this material are the property of the respective companies. Secop and the Secop logotype are trademarks of Secop GmbH.A ll rights reserved. www.secop.com

FAQs