Secop FRK6G Compressor
Specifications
- Model: FRK6G
- Voltage: 220-240V/50Hz 1~
- Oil type: Polyolester
- Oil viscosity: 19,2cSt
- Oil quantity:240cm³ / 8,1fl.oz
- Refr. charge – tech. limit: 700g / 24,7oz
- Free gas volume comp. :1545cm³ / 52,2fl.oz
- Weight:9,3kg / 20,5lbs
- Motor protection: external
- Winding resistance main: 13,1Ω (at 25°C)
- Winding resistance aux :25,3Ω (at 25°C)
- Max. winding temp. :125°C / 257°F
- Max. discharge temp.: 130°C / 266°F
- Additional note: Very good robustness against liquid intake. Ice-cube maker optimization – indirect suction intake. Special design for high refrigerant charge
General – Configurations with FRK6G
Conf. 1 Conf. 2
- Motor configuration CSIR CSIR
- Power supply (nominal) 220-240V/50Hz 208-230V/60Hz
- Number of phases 1 1
- Voltage range 187-254V 198-253V
- Approvals VDE, CB, UL VDE, CB, UL
- Starting torque HST HST
Note: Electrical equipment is included and pre-assembled to compressor.
Applications with FRK6G
Conf. 1 Conf. 2
- Refrigerant R134a R134a
- Application LBP+MBP+HBP LBP+MBP
- System cooling fan 3m/s fan 3m/s
- Hot gas defrost OK OK
- Long interval pull down OK OK
Electrical data – Configurations with FRK6G
Conf. 1 Conf. 2
- Starting device type relay relay
- Run capacitor -/- -/-
- Start capacitor 80µF 80µF
- LRA (locked rotor amps / 4s/ U(N)) 10,5A
- RLA (rated load amps / 1s/ U(N)) 1A – /-A
- Cut in current (U(N)) 10,2A
Compressor dimensions
Housing
- A Height:182mm / 7,17in
- B Height:175mm / 6,89in
- C Length shell:198mm / 7,8in
- D Length w. cover:238mm / 9,37in
- E Width:160mm / 6,3in
|
E w |
|
|||||||
| Connectors | Suction | Discharge | Process | |||||
| X | Y | Z | ||||||
| Diameter | [mm] | øi 8,11-8,29 | øi 6,11-6,29 | øi 6,11-6,29 | ||||
| (i:inside, o:outside) | [in] | øi 0,32-0,33 | øi 0,24-0,25 | øi 0,24-0,25 | ||||
| Material | copper | copper | copper | |||||
| Horizontal angle | ±2° | 35° | 13° | 0° | ||||
| Vertical angle | ±2° | 30° | 40° | 145° | ||||
| Position l/h/w | [mm] | 119/73/59 | 117/107/66 | -88/101/71 | ||||
| [in] | 4,7/2,9/2,3 | 4,6/4,2/2,6 | -3,5/4/2,8 | |||||
| Straight tube l. | [mm] | 14 | 14 | 14 | ||||
| [in] | 0,5 | 0,5 | 0,5 | |||||
Compressor fixation
Bolt joint
Snap-on
| Mounting accessories | one comp. multi pack |
| Bolt joint | M6 | ø16mm | 118-1917 118-1918 |
| Bolt joint | ø1/4″ | ø16mm | 118-1946 |
| Bolt joint | ø1/4″ | ø19mm | 118-1949 |
| Snap-on | ø7,3 | ø16mm | 118-1947 118-1919 |
Application notes
Provision for PE Grounding is located at the PE Stamp on the compressor Suction gas connector and Process connector can be switched (minor loss of cooling capacity)
Configuration
- Motor configuration;CSIR
- Power supply (nominal):220-240V/50Hz 1~
- Refrigerant:R134a
- Application:LBP+MBP+HBP
- Voltage range:187-254V
- Starting torque:HST
- Approvals:VDE
CB
CV
Electrical accessories / wiring diagram
CSIR
Ambient/ machine room temperatures minimum /maximum
- Ambient temperature range: 10 – 43°C / 50 – 110°F
- Machine room temperature range: 10 – 48°C / 50 – 119°F
- Compressor cooling: fan 3m/s
Components (incl. and pre. assembl.)
- a5 current relay (T1189/L6-S3) :117U7073
- c start capacitor (80µF, 6.3mm):117U5001
- b, d cover + clamp + screws(5VA-compl.):103N0600
Alternative comp.
- b, d 100x cover + clamp + screws(5VA):103N2060
- b, d cover + clamp + screws(5VA) in bag:103N1060
Operation pressure range
Performance tables
R134a, 220V/50Hz, CSIR, fan 3m/s, VDE, CB, UL
CONFIGURATION
- Motor configuration: CSIR
- Power supply (nominal): 208-230V/60Hz 1~
- Refrigerant: R134a
- Application: LBP+MBP
- Voltage range: 198-253V
- Starting torque: HST
- Approvals: VDE
CB
UL
Electrical accessories / wiring diagram
CSIR
Ambient/ machine room temperatures minimum /maximum
- Ambient temperature range: 10 – 43°C / 50 – 110°F
- Machine room temperature range: 10 – 48°C / 50 – 119°F
- Compressor cooling: fan 3m/s
Components (incl. and pre. assembl.)
- a5 current relay (T1189/L6-S3):117U7073
- c start capacitor (80µF, 6.3mm):117U5001
- b, d cover + clamp + screws(5VA-compl.):103N0600
Alternative comp.
- b, d 100x cover + clamp + screws(5VA):103N2060
- b, d cover + clamp + screws(5VA) in bag:103N1060
Optimization + standard conditions
R134a, 230V/60Hz, CSIR, fan 3m/s, VDE, CB, UL
Performance tables
R134a, 230V/60Hz, CSIR, fan 3m/s, VDE, CB, UL
FAQs
What is the voltage range for this compressor?
The voltage range is from 187V to 254V for 50Hz and from 198V to 253V for 60Hz.
What approvals does this compressor have?
The compressor is approved by VDE, CB, and UL.
Documents / Resources
 |
Secop FRK6G Compressor [pdf] Installation Guide FRK6G, 106G5563, FRK6G Compressor, FRK6G, Compressor |