14.02.5058
USB3.2 Gen1 Switchable Hub 4+1Port w/ Quick Charge
User Manual
How to Connect
- Connect the hub directly to your computer with an USB A-B cable, no extra driver required.
- Connect your USB devices to any of the USB ports for additional usage, connect the power supply if needed.
Diagram
Features
- Connects up to 5 USB 3.2 Gen 1, 2.0, or 1.1 devices to any USB 3.2 Gen 1 or 2.0 capable computer
- Supports USB 3.2 Gen1 transfer rates up to 5Gbps
- Quick charge ports support max. 2.4A each
- Backward compatible with all USB 2.0/1.1 devices and hosts
- Supports BC1.2
- Individual power switch.
- Supports auto switching between self-power and bus-power mode
- Plug and play, hot swappable
- No extra software drivers needed
- Optional 12V2A power supply included
Documents / Resources
 |
SECOMP 14025058 USB 3.2 Gen1 Switchable Hub 4 In 1 Port with Quick Charge [pdf] User Manual 14025058, USB 3.2 Gen1 Switchable Hub 4 In 1 Port with Quick Charge, 14025058 USB 3.2 Gen1 Switchable Hub 4 In 1 Port with Quick Charge, 14025058 USB 3.2 Gen1 Switchable Hub 4 In 1 Port, 14025058 USB 3.2 Gen1 Switchable Hub, USB 3.2 Gen1 Switchable Hub, 3.2 Gen1 Switchable Hub, Gen1 Switchable Hub, Switchable Hub, Hub |
