Apollo Series Our Most Advanced PAT Tester
“
Product Information
Specifications:
- Product Name: Apollo 600+
- Manufacturer: Seaward
- Model: Apollo Series
- Warranty: 12 months, extendable by registration
- Website: seaward.com
Product Usage Instructions
Delete Data on Apollo 600+
- Register your Apollo to receive additional warranty and product
support. - Ensure the latest firmware is installed by visiting www.seaward.com/apollo-series-firmware.
- Access the Apollo Home Screen by pressing F4.
- Select menu/options using the function key.
- Select View Data by choosing number 1.
- Select an asset using arrow keys and function key F4.
- Delete individual test results using function key F3 and
confirm by selecting Yes or pressing the Y key.
Reset Factory Settings on Apollo 600+
To reset factory settings, delete data, or clear Bluetooth
settings:
- If you need further assistance, contact technical support at
seaward.com/gb/enquire/. - Address: 15-18 Bracken Hill, South West Industrial Estate,
Peterlee, County Durham, SR8 2SW, United Kingdom - Contact: +44 (0) 191 586 3511 | Fax: +44 (0) 191 586 0227 |
Email: sales@seaward.com
FAQ
Q: How can I delete individual test results on the Apollo
Series?
A: Follow the steps outlined in the manual to access and delete
individual test results as needed.
Q: How do I reset factory settings on the Apollo 600+?
A: Refer to the manual for instructions on resetting factory
settings, deleting data, or clearing Bluetooth settings.
“`
How to delete data or reset factory settings on your Apollo 600+?
The following document is intended to be a troubleshooting guide to help you to delete data, restore / reset factory settings on your Apollo Series. Please check all aspects of this before contacting the technical support helpline.
1. Please register your Apollo to receive an additional 12 months warranty plus full access to Product Support. You can do this at www.seaward.com/warranty24 or by completing the form in the “Care and Support” card and returning by post.
2. Please ensure your Apollo has the latest firmware installed, to do this please see the following link: www.seaward.com/apollo-series-firmware
To delete a single test results on the Apollo Series:
3. From the Apollo “Home Screen” “F4”.
select menu/options, function key
4.Select “View Data”, by selecting number “1”
Note: You will require test data to be already stored on the instrument to do this. 5. Select an asset using the arrow keys and function key “F4” .
6. Individual test results can be deleted using the function key “F3” , accept this by selecting “Yes” or by pressing the “Y” key when asked if you want to “Item Delete”.
Note: The above process will only delete an individual test result, it will not delete the asset information.
To reset factory settings / delete data or clear Bluetooth settings on the Apollo Series:
7. Select menu/options, function key “F4”, to display the “Test Results Option” . 8.In the menu select “Memory” by using the arrow keys or selecting, key number “8” (Apollo 500 or 600 only). or In the menu select “Memory” by using the arrow keys or selecting, key number “7” (Apollo 400 only). 9. In the “Memory Usage” page select function key “F4” . 10. Using the blue arrow keys the items to be “Set”, “Restored” or “Deleted” can be selected using the function key “F3” . 11. To proceed with this action select function key “F4” . 12. Finally, confirm by selecting “Yes” by pressing the “Y” key when asked if you want to save changes.
If you require more help, please contact us at https://www.seaward.com/gb/enquire/.
15-18 Bracken Hill, South West Industrial Estate, Peterlee, County Durham, SR8 2SW, United Kingdom t: +44 (0) 191 586 3511 | f: +44 (0) 191 586 0227 | e: sales@seaward.com
seaward.com
Documents / Resources
 |
SEAWARD Apollo Series Our Most Advanced PAT Tester [pdf] User Guide 400, 500, 600, Apollo Series Our Most Advanced PAT Tester, Apollo Series, Our Most Advanced PAT Tester, Most Advanced PAT Tester, Advanced PAT Tester, PAT Tester |