INSTALLATION INSTRUCTIONS
For Seaview Modular Top Plate: ADA-BLANK
Refer to website for most up to date instructions and videos.
WWW.SEAVIEWGLOBAL.COM
PARTS INCLUDED
TOOLS NEEDED
Sudbury Elastomeric Marine Sealant is recommended. To purchase call 800-655-7922 or visit www.seaviewglobal.com
- Insert the four nuts into the underside of the AD-AFN-M1P plate.
- Place the rubber gasket into the grove on the top of the Seaview mount. Note, that the rubber gasket is included in the Seaview mount kit.
- Place the AD-AFN-M1P ontop of the mount, be sure to line up the four mounting holes.
- Bolt the AD-AFN-M1P down with four 5⁄16” – 1-1⁄4” bolts using a allen wrench.
- Carefully drill and mount your search light to the AD-AFN-M2BLANK plate.
Secure the search light using the hardware provided by the manufacturer.
- Apply marine adhesive sealant to the groove on the underside of the ADA-FN-M2BLANK plate.
- Bolt the ADA-FN-M2BLANK plate down with four 5⁄16” – 11⁄4” bolts using a allen wrench.
- The four holes on the back of the ADA-F2 are for securing the optional Seaview Light Bar to the top plate.
Tel: 800-655-7922
www.seaviewglobal.com
EUROPEAN OFFICE
Tel: +33 4 94 53 27 70
www.seaviewprogress.com
5-070722
Documents / Resources
 |
SEAVIEW ADA-BLANK Modular Top Plates [pdf] Instruction Manual ADA-BLANK, ADA-BLANK Modular Top Plates, Modular Top Plates, Top Plates, Plates |