zigbee-لوگو

zigbee D06 1CH سمارٽ ڊمر سوئچ ماڊل

zigbee-D06-1CH-Smart-Dimmer-Switch-Module-product-image

ھدايت وارو دستور

1CH Zigbee Dimmer Module

ماڊل: QS-Zigbee-D02-TRIAC

zigbee-D06-1CH-Smart-Dimmer-Switch-Module-image (15)

ٽيڪنيڪل وضاحتون

پيداوار جو قسم 1CH Zigbee dimmer module
جلدtage 100-240V اي سي
وڌ. لوڊ 200W (LED)
آپريشن جي تعدد 2.4-2.484GHz IEEE 802.15.4
آپريشن جي درجه حرارت. -10°C - +40°C
پروٽوڪول Zigbee 3.0
آپريشن جي حد ≤ 30 م
ڊمز (WxDxH) 39x39x18mm
IP جي درجه بندي IP20
وارنٽي 2 سال
ٺٺولي ڪرڻ جو قسم پيچرو ڪنڊ

پيڪيج جو مواد

عالمي بين الاقوامي آپريشن جڏهن به ۽ ڪٿي به
You are,AII-in-one Mobile App

zigbee-D06-1CH-Smart-Dimmer-Switch-Module-image (2)

تنصيب

ڊيڄاريندڙ

  1. تنصيب لازمي طور تي ڪئي و aي هڪ قابل اليڪٽريشن طرفان مقامي ضابطن مطابق.
  2. ڊوائيس ٻارن جي پهچ کان پري رکو.
  3. Avoid installing the device in damp, humid, or hot environments.
  4. Ensure the device is away from strong magnetic sources.
  5. ڊوائيس کي ڌار ڪرڻ، مرمت ڪرڻ، يا تبديل ڪرڻ جي ڪوشش نه ڪريو.
  6. سوئچ ماڊيول جي سامهون ايئر سرڪٽ بريڪر نصب ڪريو.

zigbee-D06-1CH-Smart-Dimmer-Switch-Module-image (3)

دستي اوور رائڊ

The switch Dimmer terminal increases the success of manual override function for the end-user to switch on/off, or adjust the light level by push-switch.

  • ننڍو ڌڪ (<1s): permanent on/off function.
  • ڊگھو ڌڪ (>1s): adjust the brightness level.

نوٽس:

  1. Both the adjustment on App and push switch can overwrite each other, the latest adjustment remains in memory.
  2. App control is synchronized with this manual switch.
  3. The terminal may be left unconnected if no manual control is required.

zigbee-D06-1CH-Smart-Dimmer-Switch-Module-image (4) zigbee-D06-1CH-Smart-Dimmer-Switch-Module-image (5)

Wiring Instructions and Diagram

  1. ڪنهن به برقي تنصيبي ڪم کي انجام ڏيڻ کان ا the بجلي جي فراهمي بند ڪريو.
  2. وائرنگ ڊاگرام جي مطابق تارن کي نيو.
  3. ماڊل داخل ڪريو جنڪشن باڪس ۾.
  4. پاور سپلائي کي چالو ڪريو ۽ سوئچ ماڊل جي ترتيب جي هدايتن تي عمل ڪريو.
ايپ استعمال ڪندڙ دستياب
zigbee-D06-1CH-Smart-Dimmer-Switch-Module-image (6)
Scan the QR code to download Tuya Smart App, or you can also search keyword “Tuya Smart” at App Store or GooglePlay to download App.

سيٽ اپ جون هدايتون

  1. لاگ اِن ٿيو يا رجسٽر ٿيو پنھنجو اڪائونٽ پنھنجي موبائل نمبر يا اي ميل ايڊريس سان. پنھنجي موبائل يا ميل باڪس ڏانھن موڪليو ويو تصديق ڪوڊ داخل ڪريو ، پوءِ پنھنجو لاگ اِن پاسورڊ مقرر ڪريو. APP ۾ داخل ٿيڻ لاءِ ”خاندان Createاھيو“ تي ڪلڪ ڪريو.zigbee-D06-1CH-Smart-Dimmer-Switch-Module-image (7)
  2. ايپ تي ZigBee گيٽ وي جو ڪنٽرول پينل کوليو.zigbee-D06-1CH-Smart-Dimmer-Switch-Module-image (8)
  3. Before making the reset operation, please make sure the ZigBee Gateway is added and installed to the WiFi network. Ensure that the product is within the range of ZigBee Gateway Network.zigbee-D06-1CH-Smart-Dimmer-Switch-Module-image (9)
  4. Turn off the traditional button switch (the one connected to the ZigBee dimmer module). Then press and hold for 10 seconds or more until the lamp connected to the module flash quickly for pairing. (If you wait more than 120 seconds you need to repeat this passage)zigbee-D06-1CH-Smart-Dimmer-Switch-Module-image (10)
  5. Click “+” (Add sub-devices) to select the suitable product gateway and follow the on-screen instruction for pairing.zigbee-D06-1CH-Smart-Dimmer-Switch-Module-image (11)
  6. ڪنيڪشن ل takeندو 10-120 سيڪنڊن کي مڪمل ڪرڻ ۾ توھان جي نيٽ ورڪ جي حالت تي منحصر ڪري ٿو.zigbee-D06-1CH-Smart-Dimmer-Switch-Module-image (12)
  7. When pairing is done, the ZigBee Dimmer will be shown on the App.zigbee-D06-1CH-Smart-Dimmer-Switch-Module-image (13)
  8. آخرڪار، توهان پنهنجي موبائل فون ذريعي ڊوائيس کي ڪنٽرول ڪري سگهو ٿا.

سسٽم گهرجون

  • وائي فائي روٽر
  • ZigBee گيٽ وي
  • آئي فون، iPad (iOS 7.0 يا وڌيڪ)
  • Android 4.0 يا وڌيڪ

zigbee-D06-1CH-Smart-Dimmer-Switch-Module-image (14)

FAQ

What devices can be connected to the Zigbee dimmer module?

Most dimmable LED lamps، تاپديپت ايلamps, or halogen lamps.

What happens if the WiFi signal is poor?

Your connected devices will remain connected to the dimmer module with your manual switch and once WiFi is stable again the device connected to module will connect automatically to your WiFi network.

مون کي ڇا ڪرڻ گهرجي جيڪڏهن آئون وائي فائي نيٽ ورڪ تبديل ڪريان يا پاسورڊ تبديل ڪريان؟

Reset the device and reconnect Zigbee dimmer module to the new WiFi network according to the App User Manual.

مان ڊوائيس کي ڪيئن ري سيٽ ڪري سگهان ٿو؟

Turn off the traditional button switch (the one connected to the Zigbee dimmer module). Then press and hold for 10 seconds or more until the lamp connected to the module flash quickly for pairing. Press the reset key for about 6 seconds until the lamp connected to the module flash quickly.

دستاويز / وسيلا

zigbee D06 1CH سمارٽ ڊمر سوئچ ماڊل [pdf] هدايت نامو
S7b70f2dea0d54cebb31e62886d22a2d7L، D06 1CH سمارٽ ڊمر سوئچ ماڊيول، D06، 1CH سمارٽ ڊمر سوئچ ماڊيول، سمارٽ ڊمر سوئچ ماڊيول، ڊمر سوئچ ماڊيول، سوئچ ماڊيول

حوالو

تبصرو ڇڏي ڏيو

توهان جو اي ميل پتو شايع نه ڪيو ويندو. گهربل فيلڊ نشان لڳل آهن *