Mircom NWK-ETH3 OpenBAS System Design Studio
OPENBAS SYSTEM DESIGN STUDIO
Mircom is releasing upgraded Configurator software.
The new version number follows
| ڪنفيگريٽر سافٽ ويئر | مطابقت رکندڙ ڪنٽرولرز | ورشن |
| System Design Studio | All OpenBAS NX controllers, OpenBAS- HV-LEARN and OpenBAS-NWK-ETH3 | 2.1.0 |
OPENBAS FIRMWARE
Mircom is releasing upgraded firmware
The new version number follows
| فائرو ويئر | ورشن |
| All OpenBAS NX controllers, OpenBAS-HV-LEARN and OpenBAS-NWK-ETH3 | 3.18.0 |
نوٽ: Please read this entire document before upgrading systems to ensure all compatibility issues are addressed and to ensure correct upgrade procedures are followed.
نئين خصوصيت
- New OpenBAS-HV-NXVAV Series Controller Support
- OpenBAS MiPages for AI (Beta): Easily Create Real-Time Custom Dashboards With AI Assistance
- Seamless, Secure Remote Access
- Expand Your Integration Capabilities with IP Remote Points
- Troubleshoot and Fine-Tune Communications with Confidence
نئين خصوصيت جون نمايان خاصيتون
New OpenBAS-HV-NXVAV Series Controller Support:
- Empower subcontractors to balance VAV airflows with the new mobile-friendly NXVAV Tool, hosted on an OpenBAS-NWK-ETH3. Through Cloudflare tunnel support, integrators can make the tool available on any device with an internet connection, no apps or OpenBAS experience needed.
- Accelerate commissioning with automatic discovery, MP Remote points, and software-based addressing for all Belimo MP devices.
- Maintain long-term reliability with manual or scheduled pressure auto zeroing for accurate VAV control.
- All new Belimo MP and pressure features fullysupported in script
OpenBAS MiPages for AI (Beta): Easily Create Real-Time Custom Dashboards With AI Assistance:
Vibe code your way to custom, real-time dashboards and graphical control pages using simple HTML and an intuitive data-attribute notation. OpenBAS MiPages for AI is optimized for your favourite AI tools. Enjoy live data updates and direct communication with any OpenBAS controller, with no extra software or licenses required.
Image prompt example (Gemini 2.5 Flash):
Based on the attached hand drawing, create a high quality, professional looking 3D graphical representation of an Air Handling Unit (AHU). The graphic should be a side view of a cross section of the AHU.
As detailed in the hand drawing, there should be the following elements:
- rectangular ducts forming a sideways “H” (light grey with 3D shadows)
- 3x ڊيampers (use the same icon for all 3)
- 1x heating coil (show in red)
- 1x cooling coil (show in blue) 1x fan
- 1x return air temp sensor probe
- 1x supply air temp sensor probe
- 1x static air pressure sensor probe (supply)
- All text and arrows in the drawing are for reference only. Do not include any text in the graphic.
- Use realistic icons for each element.
- Do not include any extra elements.
- All elements should be in the locations shown in the hand drawing.
- The background can be pure white.
MiPage prompt example (Gemini 2.5 Flash – attach MiPage markdown doc, image and points list):
- Following the attached MiPages for AI documentation, create a webpage with the attached AHU image as the main focus. Analyze the image and for each element you find, overlay the appropriate point label and value. Use ETH3 com1 slave 6 for all points. Note that regarding airflow, the top right is the return air, top left exhaust, bottom left is fresh air, and bottom right is supply air.
- Do your best to place the elements, but make sure they do not overlap. I will fine-tune the locations.
- Make the page look modern and add common sections (specs/title/nav bar etc) you would expect from a BAS interface.
Seamless, Secure Remote Access:
Monitor and configure controllers remotely to reduce costly site visits and streamline support. Simply purchase a domain through Cloudflare and install the lightweight Cloudflare daemon on a local, always-on workstation or server. Once set up, technicians can securely access their OpenBAS controllers from any browser, anywhere, without VPNs or special software. 
Expand Your Integration Capabilities with IP Remote Points:
With enhanced BACnet/IP and Modbus/TCP integration on the OpenBAS-NWK-ETH3, you can bring in 250 points from up to 20 IP devices. Whether through SDS or script, integrate third-party systems effortlessly and communicate directly between ETH3 controllers and other downstream devices. No extra gateways required. 
Troubleshoot and Fine-Tune Communications with Confidence:
Get powerful insights into your OpenBAS-NWK-ETH3 fieldbus networks. Expanded diagnostics bring real-time packet statistics, device monitoring, and advanced BACnet/MSTP debugging right to your fingertips. Instantly view active devices, bandwidth utilization, token loop times, request rates, and more, all in one dashboard. Pinpoint and resolve network issues, optimize traffic, and take the guesswork out of troubleshooting so your building automation systems always run at peak performance.
Additional New Features
Quick Onsite Data Collection:
OpenBAS-NWK-ETH3 can now trend samples of its internal points or SPI-connected OpenBAS-HV-NX10 series controller points, directly to an attached USB flash memory, streamlining data gathering for analysis and support.
Expanded Modbus Flexibility
- NX and ETH3 Modbus masters can now issue either Write Single or Write Multiple functions for Holding Registers and Coils.
- ETH3 Modbus slaves can now treat Write Single/Multiple Coil functions as Set or Override.
- ETH3 Modbus masters now have a configurable response timeout and polling delay for optimizing communication performance.
- ETH3 COM1 or COM2 can now be used to record up to 2500 Modbus packets at a time to an attached USB flash memory.
Streamlined Script Management:
- Remove and archive: This new controller option replaces the old “delete” behaviour. Scripts are now safely archived to a folder on your PC, reducing accidental loss and making recovery or future reference easy.
- Force Save Scripts: When a controller’s script is not backed up because it was configured from script over USB or outside of an SDS project, “Force Save Scripts” lets technicians manually back up the configuration script to the main ETH3. This ensures critical setups are preserved on the Main ETH3’s USB flash memory, even when working with legacy or non-standard workflows.
مطابقت چارٽ
Below table shows the System Design Studio compatibility with OpenBAS hardware.
| سسٽم ڊيزائن
اسٽوڊيو |
SUPPORTED CONTROLLERS | فائرو ويئر ورزن
MINIMUM |
فائرو ويئر ورزن
حمايت ڪئي وئي |
| 2.1.0 | All “NX” controllers (OpenBAS-xx-
NXxxxx), OpenBAS-HV-LEARN |
3.15.5+ | 3.18.0+ |
| OpenBAS-NWK-ETH3 | 3.17.0+ | 3.18.0+ | |
| 2.0.0 | All “NX” controllers (OpenBAS-xx-
NXxxxx), OpenBAS-HV-LEARN |
3.15.5+ | 3.17.0+ |
| OpenBAS-NWK-ETH3 | 3.17.0+ | 3.17.0+ | |
| 1.3.3 | All “NX” controllers (OpenBAS-xx-
NXxxxx), OpenBAS-HV-LEARN, OpenBAS-NWK-ETH3 |
3.15.5+ | 3.16.3+ |
| 1.3.2 | All “NX” controllers (OpenBAS-xx- NXxxxx), OpenBAS-HV-LEARN,
OpenBAS-NWK-ETH3 |
3.15.5+ | 3.16.1+ |
| 1.3.1 | All “NX” controllers (OpenBAS-xx-
NXxxxx), OpenBAS-HV-LEARN, OpenBAS-NWK-ETH3 |
3.15.5+ | 3.15.5+ |
| 1.3.0 | All “NX” controllers (OpenBAS-xx- NXxxxx), OpenBAS-HV-LEARN,
OpenBAS-NWK-ETH3 |
3.15.1+ | 3.15.1+ |
| 1.2.1 | All “NX” controllers (OpenBAS-xx-
NXxxxx), OpenBAS-HV-LEARN |
3.04.0+ | 3.09.4+ |
| OpenBAS-NWK-ETH3 | 3.06.0+ | 3.09.4+ | |
| 1.2.0 | All “NX” controllers (OpenBAS-xx-
NXxxxx), OpenBAS-HV-LEARN |
3.04.0+ | 3.09.0+ |
| OpenBAS-NWK-ETH3 | 3.06.0+ | 3.09.0+ | |
| 1.1.0 | All “NX” controllers (OpenBAS-xx-
NXxxxx), OpenBAS-HV-LEARN |
3.04.0+ | 3.04.0+ |
| OpenBAS-NWK-ETH3 | 3.06.0+ | 3.06.0+ | |
| 1.0.2 | All “NX” controllers (OpenBAS-xx-
NXxxxx), OpenBAS-HV-LEARN |
3.04.0+ | 3.04.0+ |
| 1.0.1 | All “NX” controllers (OpenBAS-xx-
NXxxxx), OpenBAS-HV-LEARN |
3.04.0+ | 3.04.0+ |
| 1.0.0 | All “NX” controllers (OpenBAS-xx-
NXxxxx), OpenBAS-HV-LEARN |
3.0.0+ | 3.0.0+ |
ٻيو
While the new firmware is being released on the web site, shipped products may continue to have the existing firmware (See LT-6630 – Driver installation and Firmware Upgrade Procedures) , as the existing stock is depleted. Installers are encouraged to update new installations but are free to keep existing systems running at a previous version if they are simply replacing defective parts. Mircom strives to offer the highest quality products and services. On occasion, an issue may require field action and we regret when these issues arise. As part of our commitment to quality, we incorporate any findings into a continuous improvement process to better serve our customers in the future. As part of our support offering, please feel free to contact us with any inquiries or assistance you may require. If you have any questions or concerns, please visit the Mircom Technical Support Forum at https://mircom.com/technical-support/ or contact the Technical Support Department directly.
ڇا توهان کي خبر هئي؟
You can download OpenBAS software: https://mircom.com/technical-support/documents-firmware-software-downloads/openbas-downloads/
We have FAQ’s (Frequently Asked Questions) to troubleshoot our products: https://mircom.com/technical-support/mircom-frequently-asked-questions/
We Want Your Feedback
We are always looking for your feedback on our Products and Solutions.
- Suggestions, Ideas, Needs, Problems
- Project Wins & Losses
- Case Studies & Installation Photos
- Sales & Marketing Tools
- Anything else that help our business grow together
If you have any questions or comments, please contact us directly at: pm@mircomgroup.com
25 INTERCHANGE WAY, VAUGHAN (TORONTO), ONTARIO, CANADA L4K 5W3 TOLL FREE 888-660-4655 فيڪس 888-660-4113 اي ميل: pm@mircomgroup.com www.mircom.com
دستاويز / وسيلا
 |
Mircom NWK-ETH3 OpenBAS System Design Studio [pdf] هدايت نامو NX controllers, HV-LEARN, NWK-ETH3, NWK-ETH3 OpenBAS System Design Studio, NWK-ETH3, OpenBAS System Design Studio, Design Studio |