Elecrow ESP32 AI Camera Development Board Vision Sensor Board

ڊوائيس جا حصا

1. اسپيڪر هيڊر
2. آر جي بي لائيٽ
3. آل بٽڻ
4. MIC
5. UART هيڊر
6. TF ڪارڊ سلاٽ
7. ڪئميرا
8. معاون لائٽ
9. ري سيٽ بٽڻ
10. اسپيڪر
11. ٽائپ-سي پورٽ
12. پاور لائيٽ
13. بيٽري جي روشني
14. BAT Header

تڪڙو رستو

• Al Button:
  • In “Al Voice” mode, click to toggle the “Standby/Listening” status.
• ري سيٽ ڪيچ:
  • Single-click to reboot after firmware flashing failure or device malfunction.
• پاور لائيٽ:
  • The red LED is on steadily when powered.
• بيٽري جي روشني:
  • When powered by the battery, the red light stays on while charging, and the green light stays on when fully charged.

نيٽ ورڪ جوڙڻ

1. Plug in the Type-C cable to power on.
2. If you want to use the “Al Online” feature, you need to network pair and register the Al Agent first.
3. Open your phone/computer’s WiFi list, click on “Al_Camera_XXXX” to enter WiFi pairing mode.
   • جيڪڏهن جي webpage does not open automatically, please visit 192.168.4.1 in your browser.
4. Choose an available 2.4GHz WiFi, enter the WiFi password, and click “Save Configuration”.
   • You can see your Wifi in “WiFi Network”.
   • نوٽ: If you want to clear your network, open the “Settings” app, then open the “Configure Network”, and click “RECONFIGURE”.
5. Open the “Al Online” app, then open a browser and go to https://portal.thinknode.cc/ to access the Al Hub interface. If this is your first time logging in, you need to click the “Create Account” button to create an account.
6. After the account is successfully created and logged in, you will receive a 5000-point reward.
7. Click the “Al Hub” button to start “Add Agent”.
8. Click “Add Agent” and give your Al Agent a name.
9. Click “Manage devices (0)”, then click “Add Device”, enter the verification code, and confirm.
10. After completing “Add Device”, you can configure the character.
11. If you want to browse “Historical conversations”, you need to first enable “Local Short-term Memory” and save.
    • نوٽ: If your 5000 points are used up, you need to click “Recharge” to purchase a plan that will allow you to regain points.

مکيه وضاحتون

• پيداوار جو نالو: Al Camera Module
• مکيه ڪنٽرولر ESP32-S3R8
• ڏيکاريو 1.83-inch TFT-LCD Touch Screen
• عڪسل 2 ايم پي
• وائرليس WiFi & Bluetooth 5.0
• چمڪ 16 ايم بي
• TF ڪارڊ سلاٽ 128GB تائين سپورٽ ڪري ٿو
• انٽرفيس UART Interface. IC Pad
• ان پٽ 5V/1A
• طول و عرض 56.05*44.5*18.6mm
• آپريٽنگ جي درجه حرارت -20°C کان 65°C

دستاويز / وسيلا

Elecrow ESP32 AI Camera Development Board Vision Sensor Board [pdf] استعمال ڪندڙ ھدايت ESP32 AI Camera Development Board Vision Sensor Board, ESP32, AI Camera Development Board Vision Sensor Board, AI Camera Development Board Vision Sensor Board, AI Camera Development Board, Camera Development Board, Vision Sensor Board, Sensor Board

حوالو

• استعمال ڪندڙ دستي