DICKSON DSB 2 Channel Display Logger

وضاحتون

• چينلن جو تعداد: 2
• ڊيٽا جي صلاحيت: تقريبن 400,000 پڙھڻ
• Sampوقفو: User-selectable from 1 second to 24 hours, in 1 or 10-second increments
• ڏيکاريو: LCD measuring 1.97 x 2.64 inches (50 x 67 mm)
• ڊسپلي قرارداد: 0.1 from 0 to 999.99; 1 over 1000
• بجلي جي فراهمي: 2 AA batteries (AC adapter sold separately)
• بيٽري جي زندگي: لڳ ڀڳ 2 سال
• ملفوظات: IP20-rated ABS plastic clam shell
• آپريٽنگ حالتون: 32 to 158°F (0 to 70°C) at 0 to 95% RH, non-condensing
• الارم جا قسم: ٻڌڻ ۽ بصري
• تعميل: CE تصديق ٿيل
• طول و عرض: 3.43 x 2.66 انچ (87 x 76 ملي ميٽر)
• وزن: 4.41 اوز (125 گ)

The Dickson DSB 2-Channel Display Logger is a versatile and reliable device designed for monitoring temperature, humidity, and other environmental parameters across various applications. Its dual-channel capability allows simultaneous data logging from two different sensors, making it ideal for environments that require precise and continuous monitoring

خاصيتون

• USB ڪنيڪشن: Facilitates easy connection with sensors and data transfer to computers
• تبديل ٿيندڙ سينسر: Compatible with various sensor types, including ambient temperature/humidity, thermistor in buffer solution, RTD, and K-thermocouple
• User-Selectable Sampلنگ جي شرح: Allows customization of data collection intervals to match specific monitoring needs
• وڏي ياداشت جي گنجائش: Supports extensive data collection over prolonged periods
• پائيدار ملفوظات: IP20-rated ABS plastic housing ensures increased durability
• چڙهڻ جا اختيار: Can be wall-mounted for convenient viewing
• سافٽ ويئر مطابقت: Works with DicksonWare software (SW05, SW06) for device configuration and data analysis

دٻي ۾ ڇا آهي

لوازمات: 

تبديل ٿيندڙ سينسر
The DSB device works with Dickson’s replaceable sensors (sold separately), which are designed to eliminate downtime and simplify recalibration of the device. Find more information at: DicksonData.com/replaceable-sensors

Getting Started With The DSB

The following steps will get you logging data quickly and easily:

1.  Open the rear battery compartment door and add 2 AA batteries
2. Slide the replaceable sensor all the way into the port in the back
3. Press and hold the power button to power the device on. The display will indicate that it is loading; the current firmware version number will then flash on the screen for a few seconds
4. Once powered on, you will see the most recent reading appear on the screen. You will need to configure the device via Dicksonware (see “Configuring Device Settings Using Dicksonware”)

ڊسپلي کي نيويگيٽ ڪرڻ

1. تازو پڙهڻ
2. Min/max readings (since last reset)
3. گرمي پد يونٽ (ڊوائيس تي ڪنهن به چينل جي وچ ۾ گھمندو آهي)
4. Channel number (rotates between any channels on the device)
5. بيٽري جو اشارو
6. نياپو
7. الارم آئڪن

Configuring Device Settings Using DicksonWare

If you purchased Dicksonware software with the device:

1. plug the USB stick that contains the file توهان جي ڪمپيوٽر ۾
2. ٻاهرين USB ڊرائيو کي کوليو view تنصيب file
3. ڊڪسن ويئر جي انسٽاليشن تي ڪلڪ ڪريو file ڊائون لوڊ ڪرڻ شروع ڪرڻ لاءِ
4. Once the download is complete, launch the program by clicking the icon on your desktop
5. Connect the DSB to your computer using the USB cable. The software will recognize the connected device
6. اسڪرين جي چوٽي تي "Configure" بٽڻ تي ڪلڪ ڪريو. لاگر کي نالو ڏيو.

Sampشرح 

• On the “Logger Settings” screen of Dicksonware, go to the “Sampسائڊبار ۾ "ريٽ" ٽيب
  • چونڊيو جيئنampڊراپ ڊائون مان وقفو (ڊوائيس ڪيترا ڀيرا ريڊنگ وٺندو آهي)
  • Select a display refresh interval. This determines how often the display’s recent reading, min/max readings will be refreshed
  • NOTE: selecting a faster sample rate and/or refresh rate will affect battery life. The “battery efficiency” indicator will adjust based on the selected settings
  • چونڊيو ته ڇا توهان چاهيو ٿا ته ڊوائيس مڪمل ٿيڻ تي لاگنگ بند ڪري، يا مڪمل ٿيڻ تي WRAP (اوور رائٽ) ڪريو.

چينل

• On the “Logger Settings” screen of Dicksonware, go to the “Channels” tab in the sidebar
  • فارنهائيٽ يا سيلسيس ۾ گرمي پد جي يونٽن کي ترتيب ڏيو

الارم 

• "لاگر سيٽنگون" اسڪرين تي، سائڊبار ۾ "الارم" ٽيب ڏانهن وڃو.
  • هر الارم لاءِ، يا ته چونڊيو:
    • گھٽ ۾ گھٽ = گھٽ حد (ڊوائيس الارم جڏهن گرمي پد هن نقطي کان هيٺ وڃي ٿو)
    • وڌ ۾ وڌ = مٿئين حد (ڊوائيس الارم جڏهن گرمي پد هن نقطي کان مٿي وڃي ٿو)
  • Input the temperature value or humidity% for the threshold
  • "محفوظ ڪريو" تي ڪلڪ ڪريو
• جڏهن گرمي پد ۽/يا نمي جي ريڊنگ اڳواٽ مقرر ڪيل حد کي پار ڪندي ته ڊوائيس هڪ الارم وڄائيندو.
  • الارم آئڪن ڊسپلي ۾ روشن ٿيندو
  • Alarm will sound for 1 minute.
• To silence an alarm, simply press the alarm icon on the lower
  • If the button is not pressed to silence it and the device remains in an alarm state, the device will beep twice every 5 minutes

ڊائون لوڊ ڊيٽا

There two ways to download data collected by the device.

Method 1 – Download to USB Stick

1. Plug a USB stick into the port on the side of the device
2. Wait for the USB icon to illuminate on the screen. Then click the “Download” button
3. An icon indicating the data is downloading will appear
4. Once the icon disappears, you can remove the USB stick
5. Plug the USB stick into a computer, access the external USB drive, and there will be a CSV file of the downloaded data

Method 2 – Download via USB Cable and DiskStationWare 

1. Launch DicksonWare
2. Connect the DSB via the USB cable
3. ڊڪسن ويئر هوم اسڪرين تي، "ڊائون لوڊ" بٽڻ تي ڪلڪ ڪريو.
4. Data will automatically start downloading from the device. This may take a few minutes, depending on the amount of data stored on the logger
5. Once the download is complete, you will be able to view انٽرفيس ۾ ڊيٽا ۽ هڪ حد چونڊيو

فرم ویئر

• The DSB comes preloaded with up-to-date firmware. When the unit is powered on, the current version number will flash on the screen. You should not normally have to update the firmware on the unit, but on the rare occasion where a new update is available, you can visit our webمعلومات لاءِ سائيٽ: www.dicksondata.com/support/dicksonware/dsb-firmware
• Using your DSB with the DicksonOne Legacy uploader
• The DSB can be used with the DicksonOne Legacy Uploader. This allows a user to post data collected by a non-internet-connected device to a DicksonOne account so it can be viewed, shared, and analyzed. Learn more at:  DicksonData.com/dicksonware/legacy-uploader

اضافي حمايت لاء:

• گهمڻ سپورٽ.ڊِڪسنون.ڪام.
• اي ميل سپورٽ@dicksonone.com.
• سڏ 630.543.3747

اڪثر پڇيا ويا سوال

Q1: What types of sensors are compatible with the Dickson DSB 2-Channel Display Logger?
A1: The logger is compatible with a range of replaceable sensors, including ambient temperature and humidity sensors, thermistors in buffer solutions, RTD sensors, and K-thermocouples. These sensors are sold separately and can be easily replaced to suit different monitoring requirements.

Q2: How do I configure the device settings?
A2: Device settings can be configured using DicksonWare software. After installing the software on your computer, connect the logger via the USB cable. The software will recognize the device, allowing you to set parameters such as sample intervals, alarm thresholds, and more.

Q3: Is the Dickson DSB 2-Channel Display Logger suitable for use in environments with high humidity?
A3: Yes, the logger operates effectively in environments with relative humidity up to 95%, non-condensing. However, it is important to ensure that the device is used within its specified operating conditions to maintain accuracy and longevity.

دستاويز / وسيلا

DICKSON DSB 2 Channel Display Logger [pdf] استعمال ڪندڙ ھدايت DSB-Basic-Quickstart-Guide-new, DSB 2 Channel Display Logger, DSB, 2 Channel Display Logger, Channel Display Logger, Display Logger

حوالو

• استعمال ڪندڙ دستي