DELL Command Configure Software User Manual

DELL Command Configure Software User Manual

نوٽس، خبرداريون، ۽ ڊيڄاريندڙ

نوٽ: هڪ نوٽ اهم معلومات ظاهر ڪري ٿو جيڪا توهان جي پيداوار جي بهتر استعمال ۾ مدد ڪري ٿي.

خبردار: هڪ احتياط هارڊويئر کي يا ته نقصان جي امڪاني نقصان کي ظاهر ڪندي ۽ ٻڌائي ٿو ته مسئلو کان ڪيئن بچجي.

خبردار: ھڪ ڊيڄاريندڙ ملڪيت جي نقصان، ذاتي زخم، يا موت جي امڪاني طور تي اشارو ڪري ٿو.

© 2025 Dell Inc. يا ان جا ماتحت. سڀ حق محفوظ آهن. Dell Technologies, Dell, ۽ ٻيا ٽريڊ مارڪ Dell Inc. يا ان جي ماتحت ادارن جا ٽريڊ مارڪ آھن. ٻيا ٽريڊ مارڪ شايد انهن جي لاڳاپيل مالڪن جا ٽريڊ مارڪ هوندا.

Introduction to Dell Command | Configure

Dell Command | Configure is a software package that provides BIOS configuration capability for Dell client systems. IT administrators can use this tool to configure BIOS settings and create BIOS packages using the Dell Command | Configure User Interface (UI) or Command-Line Interface (CLI).

نوٽ: Dell Command | Configure replaces Dell Client Configuration Toolkit version 2.2.1.

• ڊيل ڪمانڊ | ترتيب ڏيو 4.10.1 يا بعد ۾ هڪ 64-bit SCE رڪاوٽن سان.
• Dell Command | Configure 4.10.1 or later on a 64–bit ARM client machine, generates an ARM-based 64–bit SCE.

For more information, see the Dell Command | Configure 5.x User’s Guide on the Support | Dell site.

موضوع:

• نسخو
• مطلوب سامعين
• دستاويز جو مقصد

نسخو

هي باب هڪ اوور مهيا ڪري ٿوview of the Dell Command | Configure version history, including release dates, supported operating systems, and compatible platform architectures to help you identify which version aligns with your system requirements.

Dell Command | Configure supports the following Windows operating systems:

• ونڊوز 11
• ونڊوز 10
• ونڊوز پري انسٽاليشن ماحول (ونڊوز پي اي)

The following table lists the available Dell Command | Configure versions along with their release dates, supported operating systems, and platform compatibility.

جدول 1. نسخو ميٽرڪس

نوٽ: Starting from the Dell Command | Configure 5.1.0 release, support for 32-bit systems has been discontinued.

مطلوب سامعين

The installation guide for Dell Command | Configure is intended for IT professionals and system administrators. It offers comprehensive instructions for configuring BIOS settings and creating BIOS packages using both the Dell Command Configure User Interface (UI) and Command-Line Interface (CLI).

دستاويز جو مقصد

This document provides instructions for installing and configuring BIOS settings and creates BIOS packages using the Dell Command | Configure User Interface (UI) or Command-Line Interface (CLI) for efficient BIOS management.

ڊيل ڪمانڊ تائين رسائي | انسٽالر کي ترتيب ڏيو

ڊيل ڪمانڊ | تنصيب کي ترتيب ڏيو file is available as a Dell Update Package (DUP) at Support | Dell. Follow these steps to download the DUP:

1. وڃو سپورٽ | ڊيل.
2. هيٺ ڪهڙو پراڊڪٽ اسان توهان جي مدد ڪري سگهون ٿاداخل ڪريو خدمت Tag توهان جي سپورٽ ڊيل ڊوائيس جو ۽ ڪلڪ ڪريو جمع ڪرائڻ، يا ڪلڪ ڪريو ذاتي ڪمپيوٽر جي ڳولا ڪريو.
3. توھان جي ڊيل ڊوائيس لاءِ پراڊڪٽ سپورٽ صفحي تي، ڪلڪ ڪريو ڊرائيور ۽ ڊائون لوڊ.
4. ڪلڪ ڪريو دستي طور تي هڪ مخصوص ڊرائيور ڳوليو توھان لاءِ [ماڊل].
5. چيڪ ڪريو سسٽم مينيجمينٽ چيڪ باڪس هي زمرو گرڻ.
6. ڳوليو ڊيل ڪمانڊ | ترتيب ڏيو in list and select ڊائون لوڊ ڪريو صفحي جي ساڄي پاسي.
7. ڳوليو ڊائون لوڊ file توهان جي ڪمپيوٽر تي (گوگل ڪروم ۾ file ڪروم ونڊو جي تري ۾ ظاهر ٿئي ٿو)، ۽ ايگزيڪيوٽو هلائي file.
8. اسڪرين تي ڏنل هدايتن تي عمل ڪريو.

Dell Command | Configure for Windows

This section provides details about the supported Windows versions and Dell platforms, and explains how to install and uninstall Dell Command | Configure on Windows systems.

موضوع:

• ونڊوز لاءِ سپورٽ ٿيل آپريٽنگ سسٽم
  
• سپورٽ ٿيل پليٽ فارم
  
• Installing Dell Command | Configure on Windows systems
• Uninstalling Dell Command | Configure from Windows systems
• Upgrading Dell Command | Configure on Windows systems

ونڊوز لاءِ سپورٽ ٿيل آپريٽنگ سسٽم

ٽيبل 2. سپورٽ ٿيل آپريٽنگ سسٽم

سپورٽ ٿيل پليٽ فارم

Table 3. Supported platforms

Table 3. Supported platforms (continued)

نوٽ: Platforms must support WMI-ACPI BIOS for full functionality.

نوٽ: For systems with non-WMI-ACPI compliant BIOS, functionality is limited. For more information, see Dell Command | Configure Version 5.x User’s Guide at Support | Dell

Installing Dell Command | Configure on Windows systems

You can install Dell Command | Configure on Windows systems using either the Dell Update Package (DUP) or the MSI installer.
Both installers support standard and silent (unattended) installation modes.

نوٽ: Microsoft .NET 4.8.1 or later must be installed on the client system to install Dell Command | Configure using the user interface.

نوٽ: If User Account Control (UAC) is enabled on a Windows 10 system, silent mode installation is not allowed. Ensure that you have administrative privileges before installing Dell Command | Configure in silent mode.

شرطون

Before installing Dell Command | Configure, ensure the following:

• A supported Windows operating system is installed and running.
• Dell Command | Configure installation file is available (downloadable from Support | Dell).
• Administrator privileges are available on the system.
• Microsoft .NET 4.8.1 (for UI) and .NET 8.0 SDK (for Dell Command Secure BIOS Configuration Server) are installed.
• Microsoft Visual C++ Redistributable for Visual Studio 2022 is installed.
• WMI-ACPI compliant BIOS is available for full functionality.

نوٽ:

• The system must be connected to a stable network when installing Dell Command | Configure with support for Dell Command Secure BIOS Configuration.
• On Windows 10 or later, enable Microsoft .NET فريم ورڪ 4.8 or later version from the ونڊوز فيچرز کي آن يا آف ڪريو اسڪرين.
• The system has limited functionality if it does not have a WMI-ACPI compliant BIOS. Update the BIOS with a compatible version, if available. For more information, see Windows SMM Security Mitigations Table (WSMT) Compliance section in the Dell Command | Configure User’s Guide at Support | Dell.

Install Dell Command | Configure using DUP: Standard installation

To install Dell Command | Configure, run the Dell Update Package (DUP) with default settings. This method simplifies deployment and requires minimal user input.

1. ڊبل ڪلڪ ڪريو ڊائون لوڊ ٿيل DUP، ڪلڪ ڪريو ها، ۽ پوء ڪلڪ ڪريو انسٽال ڪريو.
   ڊيل ڪمانڊ | انسٽاليشن وزرڊ کي ترتيب ڏيو.
2. انسٽاليشن وزرڊ کي هلائڻ.
   وڌيڪ معلومات لاءِ، ڏسو رننگ انسٽاليشن وزرڊ.

Install Dell Command | Configure using DUP: Silent installation

To install Dell Command | Configure silently, use the Dell Update Package (DUP) with command-line switches that suppress user prompts. This method enables automated, unattended installation.

1. Browse to the folder where you have downloaded the Dell Update Package (DUP) and open the command prompt.
2. ھيٺ ڏنل حڪم ھلايو:

Dell-Command-Configure-Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE/s.

NOTE: For more information about using commands, type any one of the following commands:

• Dell-Command-Configure-Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE/s.
• Dell-Command-Configure-Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE/?.

NOTE: During silent installation using DUP, Dell Command | Configure installs without Dell Command Secure BIOS Configuration Server.

Install Dell Command | Configure using MSI file: Standard installation

To install Dell Command | Configure, run the MSI file directly for a standard installation with default settings providing a simple and user-friendly setup process.

1. ڊبل ڪلڪ ڪريو ڊائون لوڊ ٿيل ڊيل اپڊيٽ پيڪيج (DUP)، ۽ ڪلڪ ڪريو ها.
2. EXTRACT تي ڪلڪ ڪريو.
   برائوز فار فولڊر ونڊو ڏيکاري ٿي.
3. Specify a folder location on the system, or create a folder to extract the files, and click OK.
4. جي طرف view ڪڍيل files، ڪلڪ ڪريو View فولڊر.
   فولڊر ۾ ھيٺيون شيون شامل آھن files:
   ● 1028.mst
   ● 1031.mst
   ● 1034.mst
   ● 1036.mst
   ● 1040.mst
   ● 1041.mst
   ● 1043.mst
   ● 2052.mst
   ● 3076.mst
   ● Command_Configure.msi
   ● mup.xml
   ● package.xml
5. ڊيل ڪمانڊ تائين رسائي حاصل ڪرڻ لاءِ | انسٽاليشن وزرڊ کي ترتيب ڏيو، ڊبل ڪلڪ ڪريو Command_Configure.msi.
6. انسٽاليشن وزرڊ کي هلائڻ.
   وڌيڪ معلومات لاءِ، ڏسو رننگ انسٽاليشن وزرڊ.
   After you install Dell Command | Configure , you can use the GUI or the CLI to configure the client systems. For more information about configuring the systems, see the following documents at Support | Dell:
   ● Dell Command | Configure Command-Line Interface Reference Guide
   ● Dell Command | Configure User’s Guide

انسٽاليشن وزرڊ کي هلائڻ

To run the installation wizard for installing the Dell Command | Configure .msi file توهان جي ڊوائس تي:

1. Browse to the folder in which you have extracted the Command_Configure.msi or DUP file.
2. Right-click the .msi or DUP and click Run as administrator.
   انسٽاليشن مددگار ڏيکاريل آهي.
3.  ڪلڪ اڳيون.
   لائسنس جو معاهدو اسڪرين ڏيکاري ٿو.
4. لائسنس جو معاهدو پڙهو ۽ ڪلڪ ڪريو آئون لائسنس جي معاهدي ۾ شرطون قبول ڪريان ٿو، ۽ پوء ڪلڪ ڪريو اڳيون.
   ڪسٽمر معلومات اسڪرين ڏيکاري ٿي.
5. Type the username and organization, select one of the following options, and then click Next.
   ● For multiple users, select Anyone who uses this computer (all users).
   ● For a single user, select Only for me (Dell Computer Corporation).
   ڪسٽم سيٽ اپ اسڪرين ڏيکاري ٿي.
6. Dell Command | انسٽال ڪرڻ لاءِ اڳيون ڪلڪ ڪريو CLI ۽ GUI کي ڊفالٽ ڊاريڪٽري ۾ ترتيب ڏيو. ڊفالٽ ڊيل ڪمانڊ | انسٽاليشن ڊاريڪٽري کي ترتيب ڏيو:
   ● For 32-bit systems, C:\Program Files\Dell\Command Configure.
   ● For 64-bit systems, C:\Program Files (x86)\Dell\Command Configure.
   پروگرام کي انسٽال ڪرڻ لاء تيار اسڪرين ڏيکاري ٿي.
7. ڪلڪ ڪريو ها.
   The Installing Dell Command | Configure screen is displayed. When the installation completes, the installation wizard- completed screen is displayed.
8. ڪلڪ ڪريو ختم.
   جيڪڏهن ڊيل حڪم | GUI ترتيب ڏيو ڪاميابيءَ سان انسٽال ٿيل آھي، GUI لاءِ شارٽ ڪٽ ڊيسڪ ٽاپ تي ڏيکاريل آھي.

Install Dell Command | Configure using .msi file: Silent installation

You can seamlessly install Dell Command | Configure in silent mode using the .msi file, leveraging command-line parameters for efficient deployment.

نوٽ: Dell Command | Configure silent mode installation supports installing the Dell Command Secure BIOS Configuration Server, but it does not support the Dell Command | Configure option.

نوٽ: By default, during silent installation using the .msi file, Dell Command | Configure installs without Dell Command Secure BIOS Configuration Server. To install DCC with DCSBC server, use the following command: msiexec.exe /i Command_Configure.msi DCSBC=1 /qn

1. فولڊر ڏانھن وڃو جتي ڊيل ڪمانڊ | انسٽالر کي ترتيب ڏيو ڊيل اپڊيٽ پيڪيج (DUP) مان ڪڍيو ويو آهي.
2. Open Command Prompt as administrator.
3. ھيٺ ڏنل حڪم ھلايو: msiexec.exe /i Command_Configure.msi /qn
   ڊيل ڪمانڊ | ڪنفيگر جا حصا خاموشيءَ سان ھيٺ ڏنل جڳهن ۾ نصب ٿيل آھن:
   ● For 32-bit systems, C:\Program Files\Dell\Command Configure.
   ● For 64-bit systems, C:\Program Files (x86)\Dell\Command Configure.

سپورٽ ٿيل ٻولين سان انسٽال ڪرڻ

To assess silent and unattended with supported languages, run the following command: msiexec /i Command_Configure.msi TRANSFORMS=1036.mst.

To specify the installation language, use the command-line option TRANSFORMS=<language ID>.mst, where <language ID> corresponds to one of the following:

• 1028 - چيني تائيوان
• 1031 - جرمن
• 1033 - انگريزي
• 1034 - اسپينش
• 1036 - فرانسيسي
• 1040 - اطالوي
• 1041 - جاپاني
• 1043 - ڊچ
• 2052 - آسان چيني
• 3076 - چيني هانگ ڪانگ

نوٽ: If the specified language or the default operating system language is not supported, the installation defaults to English.

Uninstalling Dell Command | Configure from Windows systems

To uninstall Dell Command | Configure, use the Control Panel to remove the application from Windows ensuring clean removal without affecting system settings.

1. کوليو ڪنٽرول پينل.
2. ڏانهن وڃو پروگرام > پروگرام ۽ خاصيتون.
3. Find Dell Command | Configure فهرست ۾.
4. Right-click it and select انسٽال ڪريو.
5. Follow the on-screen prompts to complete the uninstallation.

Upgrading Dell Command | Configure on Windows systems

You can upgrade Dell Command | Configure using a Dell Update Package (DUP) or the .msi file.

نوٽ: Microsoft .NET Framework 8.0 or later must be installed on the client system to ensure a successful Dell Command | Configure user interface installation.

نوٽ: If Windows User Account Control (UAC) is enabled on Windows 10 and 11 systems, you cannot install Dell Command | Configure in silent mode. Ensure that you have an administrative privilege before installing Dell Command | Configure in silent mode.

نوٽ: This system does not have a WMI-ACPI compliant BIOS, so the limited functionality is available. Update the BIOS with a compatible version, if available. For more information, see Dell Command | Configure 5.x Release Notes at Support | Dell.

نوٽ: You cannot install and upgrade Dell Command | Configure on non-WMI-ACPI in silent mode.

Upgrade Dell Command | Configure using DUP file

ڊيل ڪمانڊ کي اپڊيٽ ڪرڻ لاءِ ھيٺ ڏنل قدمن تي عمل ڪريو | ترتيب ڏيو (اڳوڻي ڊيل ڪلائنٽ ڪنفيگريشن ٽول ڪٽ) ايندڙ ورزن ڏانهن:

1. Double-click the downloaded DUP, and then click انسٽال ڪريو.
   ڊيل ڪمانڊ | انسٽاليشن وزرڊ کي ترتيب ڏيو شروع ڪيو ويو آهي.
2. ھلايو انسٽاليشن مددگار، ۽ ھدايتن تي عمل ڪريو جيڪي اسڪرين تي ڏيکاريل آھن.

Upgrade Dell Command | Configure using .msi file

To upgrade Dell Command | Configure, uninstall the existing version and install the new version using the .msi installer ensuring a clean upgrade with the latest features and fixes.

1. تازه ترين انسٽاليشن ڊائون لوڊ ڪريو file Dell-Command-Configure-
   Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE from Support | Dell.
2. Extract the installation using any of the following:
   ● From the folder where you extracted the file, double-click the Dell_Command_Configure.msi file
   ● From the command prompt, browse to the directory where you extracted the file، ۽ پوءِ ھيٺ ڏنل حڪم ھلايو:
   msiexec.exe /i Command_Configure.msi REINSTALL=ALL REINSTALLMODE=VOMUS
   نوٽ: انسٽاليشن مددگار اسڪرين جي پٺيان ڏيکاري ٿي "ڊيل ڪمانڊ جو هڪ پراڻو نسخو | هن سسٽم تي ترتيب ڏنل آهي. جيڪڏهن توهان جاري رکو ٿا، انسٽالر پراڻو ورزن هٽائي ڇڏيندو ۽ جديد ورزن کي انسٽال ڪرڻ لاءِ اڳتي وڌندو. جيڪڏهن توهان تازو ورزن جي انسٽاليشن کي منسوخ ڪريو ٿا، سسٽم کي بحال نه ڪيو ويندو ڊيل ڪمانڊ جي پوئين ورزن ڏانهن | ترتيب ڏيو. ڇا توھان جاري رکڻ چاھيو ٿا؟" پيغام.
3. اپڊيٽ ڪرڻ لاءِ اسڪرين تي ڏنل هدايتن تي عمل ڪريو.
   نوٽ: خاموش اپ گريڊ لاءِ، ھيٺ ڏنل حڪم ھلايو: msiexec /i Command_Configure.msi REINSTALL=ALL REINSTALLMODE=vmous REBOOT=REALLYSUPPRESS /qn
   NOTE: If a previous version of Dell Command | Configure is installed in a non-default directory, you cannot upgrade to the latest Dell Command | Configure version. In this case, uninstall the existing version and assess fresh installation of the latest version.

ڊفالٽ فولڊر ۾ اپڊيٽ ڪرڻ

To upgrade Dell Command | Configure, run a command from the extracted DUP folder to silently install the update in the default directory.

1. فولڊر ڏانھن براؤز ڪريو جنھن ۾ توھان ڪڍيو آھي Dell Command | ڊيل اپڊيٽ پيڪيج (DUP) مان انسٽالر کي ترتيب ڏيو.
2. ھيٺ ڏنل حڪم ھلايو: msiexec.exe /i Command_Configure.msi /qn
   ڊيل ڪمانڊ | ڪنفيگر جا حصا خاموشيءَ سان ھيٺ ڏنل جڳهن ۾ نصب ٿيل آھن:
   ● For 32-bit systems, C:\Program Files (x86)\Dell\Command Configure.
   ● For 64-bit systems, C:\Program Files (x86)\Dell\Command Configure.

Dell Command | Configure for Linux

This section provides details about the supported Linux versions and Dell platforms, and explains how to install and uninstall Dell Command | Configure on Linux systems.

موضوع:

• Supported operating systems for Linux
• Supported Platforms for Linux
• Installing Dell Command | Configure on Linux systems
• Uninstalling Dell Command | Configure on Linux systems
• Upgrading Dell Command | Configure for systems running on Linux

Supported operating systems for Linux

ٽيبل 4. سپورٽ ٿيل آپريٽنگ سسٽم

Supported Platforms for Linux

Table 5. Supported platforms

نوٽ: Platforms must support WMI-ACPI BIOS for full functionality.

نوٽ: For systems with non-WMI-ACPI compliant BIOS, functionality is limited. For more information, see Dell Command | Configure Version 5.x User’s Guide at Support | Dell.

Installing Dell Command | Configure on Linux systems

To install Dell Command | Configure on Linux, download the appropriate .deb or .rpm package from Dell Support and use your package manager to install it enabling CLI-based BIOS configuration on supported Dell systems.

نوٽ:

• Dell Command | Configure user interface is not supported on systems running the Linux operating system.
• Dell Command Secure BIOS Configuration(DCSBC) is not supported on systems running the Linux operating system.

You can install the Dell Command | Configure for Red Hat and Debian-based linux distributions, by following these steps:

1. Go to Support | Dell, download the tar.gz file.
2. نوٽ:
   ● If you have downloaded the package for Red Hat Enterprise Linux, the RPMs are included in the package.
   ● If you have downloaded the package for Ubuntu Desktop, the Debians are included in the package.

Install the RPMs or Debians as appropriate for your system.
ڊفالٽ تنصيب جو رستو آهي /opt/dell/dcc.

شرطون

• ورڪ اسٽيشن کي سپورٽ ٿيل لينڪس آپريٽنگ سسٽم تي هلڻ گهرجي.
• ڊائونلوڊ ڪريو OpenSSL 1.x لائبريري انسٽال ڪرڻ ۽ هلائڻ لاءِ Dell Command | Red Hat Enterprise Linux 8 ۽ Ubuntu Desktop 20.04 تي ترتيب ڏيو.
• Download openSSL 3.x libraries to install and run Dell Command | Configure on Red Hat Enterprise Linux 9, Ubuntu Desktop 22.04, and Ubuntu Desktop 24.04.

Install Dell Command | Configure on Red Hat Enterprise Linux 8 and 9

To install Dell Command | Configure on Red Hat Enterprise Linux 8 or 9, download the RPM package from Dell Support and install it using the command line.

1. کان dell.com/support, Download the command-configure-<version>-<Build Number>.<RHEL Version>.<architecture>.tar.gz file from Support | Dell .
2. انٽر کان file هيٺ ڏنل حڪم استعمال ڪندي:

tar -zxvf command-configure-<version>-<Build Number>.<RHEL Version>.<architecture>.tar.gz

To install Dell Command | Configure on systems running Red Hat Enterprise Linux 8 or 9 systems using 64-bit RPMs, run the commands in the following order:

rpm —ivh srvadmin-hapi-<version number>.el8.x86_64.rpm

rpm —ivh command-configure-<version number>-<Build Number>.<RHEL Version>.<architecture>.rpm

Installing Dell Command | Configure for systems running on Ubuntu Desktop 20.04, 22.04 and 24.04

To install Dell Command | Configure on supported Ubuntu versions, download the DEB package from Dell Support and install it using the command line. See Accessing Dell Command | Configure installer.

1. Download the command_configure-<version>-<Build Number>.<Ubuntu Version>_<architecture>.tar.gz from Support | Dell.
2. انٽر کان file using the following command: tar -xvzf command-configure_<version>-<Build Number>.<Ubuntu Version>_<architecture>.tar.gz
   The installer command-configure_<version><Build Number>.<Ubuntu
   نسخو>_ .tar.gz ھيٺ ڏنل پيڪيجز تي مشتمل آھي جيڪي ھيٺ ڏنل ترتيب ۾ نصب ٿيڻ گهرجن.
   ● srvadmin-hapi_<version number>_amd64.deb
   ● command-configure_<version>-<Build Number>.<Ubuntu Version>_<architecture>.deb
3. To install HAPI, run the following command: dpkg -i srvadmin-hapi_<version number>_amd64.deb
   نوٽ: If the installation on Ubuntu fails due to dependency issues with libc, ensure that you upgrade the system by running the following command:
   apt-get -f انسٽال ڪريو
4. To install Dell Command | Configure, run:
   dpkg -i command-configure_<version>-<Build Number>.<Ubuntu Version>_<architecture>.deb
   ڊفالٽ تنصيب جو رستو آهي /opt/dell/dcc.
   نوٽ: If the installation on Ubuntu fails due to dependency problems libc, then ensure to upgrade the system using apt-get upgrade command:
   apt-get -f انسٽال ڪريو

Uninstalling Dell Command | Configure on Linux systems

To uninstall Dell Command | Configure on Linux, run the appropriate RPMs for your system to remove the installed package (rpm or deb) based on your distribution removing the application and its components.

نوٽ: Uninstalling or upgrading Dell Command | Configure on systems running supported Linux operating systems leave empty files and folders on the system. These residual files and folders do not affect system functionality.

Uninstall Dell Command | Configure from Red Hat Enterprise Linux 8 and 9

ڊيل ڪمانڊ کي انسٽال ڪرڻ لاءِ | Red Hat Enterprise Linux 8 يا 9 تي هلندڙ سسٽم تي ترتيب ڏيو، ھيٺئين ترتيب ۾ ڪمانڊ ھلايو:

rpm -e command-configure-<version>-<build number>.el8/9.x86_64

rpm -e srvadmin-hapi- .el8.x86_64

Uninstall Dell Command | Configure from Ubuntu Desktop

You can uninstall Dell Command | Configure and dependent packages on systems running Ubuntu Desktop 20.04, 22.04 and 24.04 using a Deb package.

نوٽ: You must uninstall Dell Command | Configure before uninstalling the dependent packages.

1. ڊيل ڪمانڊ کي انسٽال ڪرڻ لاءِ | ٺاھ جوڙ کي ترتيب ڏيو ۽ ختم ڪريو files ۽ عارضي files, run the following command: dpkg –purge command-configure
2. Hapi کي انسٽال ڪرڻ ۽ ٺاھ جوڙ کي ختم ڪرڻ لاء files ۽ عارضي files, run the following command: dpkg –purge srvadmin-hapi
3. To verify that the Dell Command | Configure is uninstalled in your system, run the following command: dpkg –l | grep command-configure
   If Dell Command | Configure details are not displayed, then the uninstallation is successful.

Upgrading Dell Command | Configure for systems running on Linux

You can upgrade Dell Command | Configure on Linux, uninstall the existing version and install the latest package.

1. Download the Dell Command | Configure .tar.gz file from Support | Dell and save it on your system.
2. ڊيل ڪمانڊ جي ورزن کي اپڊيٽ ڪريو | سسٽم تي ترتيب ڏيو.

نوٽ: Uninstalling and upgrading Dell Command | Configure on systems running supported Linux operating systems leaves empty files ۽ فولڊر سسٽم تي. جي files ۽ فولڊرن تي ڪو به فنڪشنل اثر نه آهي.

Upgrade Dell Command | Configure on Red Hat Enterprise Linux 8 and 9

To upgrade Dell Command | Configure on Red Hat Eenterprse Linux 8 or 9, uninstall the current version and install the latest RPM package.

1. Download the command-configure-<version>-<Build Number>.<RHEL Version>.x86_64.tar.gz file from Support | Dell.
2. انٽر کان file using the following command: tar -zxvf command-configure-<version>-<Build Number>.<RHEL Version>.x86_64.tar.gz

To upgrade Dell Command | Configure on computers running Red Hat Enterprise Linux 8 or 9 computers using 64-bit RPMs, run the commands in the following order:

rpm -Uvh -nodeps srvadmin-hapi- . .x86_64.rpm

rpm —Uvh command-configure-<version>-<build number>.<RHEL Version>.x86_64.rpm

Upgrade Dell Command | Configure on Ubuntu Desktop

To upgrade Dell Command | Configure for systems running on Ubuntu Desktop 20.04, 22.04 and 24.04 using a Deb package.

1. Download the command_configure-linux-<version>-<build number>.tar.gz from Support | Dell.
2. انٽر کان file using the following command: tar -zxvf command-configure_<version>-<build number>.<Ubuntu Version>_amd64.tar.gz
3. اپڊيٽ ڪرڻ لاء، ھيٺ ڏنل حڪم ھلايو:
   dpkg -i srvadmin-hapi_<version number>_amd64.deb
   dpkg -i command-configure_<version>-<build number>.<Ubuntu Version>_amd64.deb
4. موجوده ڊيل ڪمانڊ جي تصديق ڪرڻ لاء | ورجن کي ترتيب ڏيو، ڊفالٽ انسٽاليشن رستي ڏانھن وڃو ۽ ھلايو:
   ./cctk –version

Advanced Dell Command | Configure installation scenarios

هي باب هڪ اوور مهيا ڪري ٿوview of advanced installation scenarios for Dell Command | Configure, including secure BIOS configuration and installation in the Windows Preinstallation Environment (Windows PE). These scenarios ensure robust system management and deployment capabilities.

موضوع:

• Installing Dell Command | Configure for Dell Command Secure BIOS Configuration
• Dell Command | Configure for Windows Pre installation Environment.

Installing Dell Command | Configure for Dell Command Secure BIOS Configuration

Hardware Security Module (HSM) is used as a signing method for the Dell Command Secure BIOS Configuration workflow.

نوٽ: Dell Command Secure BIOS Configuration(DCSBC) is not compatible with ARM64-bit systems.

شرطون

Dell Command Secure BIOS Configuration with Dell Command | Configure allows you to use any Hardware Security Module vendor to sign the Dell Command Secure BIOS Configuration Server پيل لوڊ.

پڪ ڪريو ته هيٺين گهرجون پوريون ڪيون ويون آهن:

• HSM Setup and OpenSSL: Ensure that you have set up your Hardware Security Module (HSM) provider in your environment. It is recommended to use OpenSSL as the open-source signing tool to generate signatures, which can then be used by Dell Command | Configure.
• Update HSMSigning.bat File: You must update the HSMSigning.bat file with a command compatible with your HSM setup. This file is at: C:\Program Files (x86)\Dell\Command Configure\X86_64\HSMSigning.bat. Modify the signature generation command in line 12 according to your HSM provider requirements. The default command is: “%OpensslPath%\openssl.exe” dgst -sha256 -sign “%ObfuscatedKeyPath%\%PrivateKeyName%” -out “%outlocat%\blobsignature.txt” %1 . Ensure that the command you provide generates the signature in the same path as specified in the default command, with the filename set as blobsignature.txt. Do not modify the last option %1, as it allows the signature command to accept the payload file that is generated by Dell Command | Configure during runtime for signing.

Installing Dell Command | Configure for Dell Command Secure BIOS Configuration Server

To install Dell Command | Configure for use with the Secure BIOS Configuration Server, download the appropriate installer package and follow the setup instructions to enable remote BIOS configuration and policy enforcement.

1. Run Command_Configure.msi from Power Shell in administrator mode.
   انسٽاليشن مددگار ڏيکاريل آهي.
2. Select the Dell Command Secure Bios Configuration Server option.
3. ڪلڪ اڳيون.
4. انسٽاليشن شروع ڪرڻ لاءِ انسٽال تي ڪلڪ ڪريو.
   The installation completion wizard is displayed.
5. انسٽاليشن مڪمل ڪرڻ لاءِ Finish تي ڪلڪ ڪريو.
   The Dell Secure Configuration Service is created and initiated in the Windows Services tab.
   نوٽ: To run Dell Secure Configuration on a particular port, the port must be updated to the appsettings.json file تي URL line. Locate the following path: C:\Program Files (x86)\Dell\Command Configure\ABIWindowsService\appsettings.json.
   نوٽ: The start time for Dell Command Secure BIOS Configuration varies depending on the platforms—the maximum time limit is set to 2-3 minutes.

Configuring the Dell Command Secure BIOS Configuration Server using HTTPS

The Dell Command | Configure installer configures the Dell Command Secure BIOS Configuration Server for HTTP calls. For added security, you can also configure the Dell Command Secure BIOS Configuration Server using HTTPS on the system where Dell Command Secure BIOS Configuration is installed, by following these steps:

1. Press the Windows key and press the R key to launch the Run dialog box.
2. Type Services.msc and then press Enter to open Windows Services.
3. Locate Dell Secure Configuration Service.
4. Right-click Dell Secure Configuration Service, and click Stop.
5. Go to the Dell Command | Configure installation path C:\Program Files (x86)\Dell\Command
   Configure\ABIWindowsService\appsettings.json, and modify the appsettings.json file هيٺين سان گڏ:
   {
   “Logging”: {
   “LogLevel”: {
   “Default”: “Information”,
   “Microsoft.Hosting.Lifetime”: “Information”
   }
   },
   “Kestrel”: {
   “Endpoints”: {
   “HttpsInlineCertFile”: {
   "Url”: “< URL:Port>”,
   “ClientCertificateMode”: “AllowCertificate”,
   “Certificate”: {
   “Path”: “<Https certificate complete path>”,
   “Password”: “<Https Cert Password>”
   }
   }
   }
   }
   }
   نوٽ: The certificate to be provided must be associated to the Url specified in the same field. Also, specify the Client Certificate Modeas Allow Certificate to allow Dell Command Secure BIOS Configuration server to function without any issues. You must specify the complete Path for the Https certificate and the Password for authenticating the Https Certificate. The Password can be left empty if the Https certificate does not require a password authentication.
6. Save changes to the appsettings.json file and start the Dell Secure Configuration Service from Windows Services.
   نوٽ: There are other ways as well to configure an HTTPS Server. For more details, see Configure endpoints for the ASP.NET Core Kestrel web server and Client Certificate Mode Enum.

Dell Command | Configure for Windows Preinstallation Environment

Windows Preinstallation Environment (WinPe) provides a stand-alone preinstallation environment that is used to prepare a system for Windows installation. For client systems that do not have an operating system that is installed, you can create a bootable image that contains Dell Command | Configure to run the Dell Command | Configure commands on Windows PE. To create Windows PE 10.0, and Windows PE 11.0 images, you can use Windows Assessment and Deployment Kit (Windows ADK).

Using Windows PE 10.0, and Windows PE 11.0, you can integrate Dell Command | Configure.

نوٽ: Dell Command | Configure 5.x for Windows Preinstallation Environment is not compatible with ARM64-bit systems.

ونڊوز پي اي 10.0 ۽ 11.0 استعمال ڪندي بوٽبل تصويري اڳئين انسٽاليشن ماحول ٺاهڻ

To create a bootable image using Windows PE 10.0 or 11.0, use the Windows ADK to generate a customized Windows PE environment, then add the necessary tools and drivers before creating a bootable ISO or USB. This environment supports preinstallation tasks such as BIOS configuration and OS deployment.

1. Microsoft کان webسائيٽ، ڪلائنٽ سسٽم تي ونڊوز ADK ڊائون لوڊ ۽ انسٽال ڪريو.
   نوٽ: انسٽال ڪرڻ وقت صرف چونڊيو لڳائڻ جا اوزار and Windows Preinstallation Environment (Windows PE).
2. From Support | Dell, download and install Dell Command | Configure.
3. انسٽال ڪريو ڊيل ڪمانڊ | ترتيب ڏيو.
4. ڊيل ڪمانڊ کي ضم ڪريو | ڊاريڪٽري جي جوڙجڪ کي ISO ۾ ترتيب ڏيو file هڪ بوٽبل ISO تصوير ٺاهڻ لاء.

ڊيل ڪمانڊ کي ضم ڪرڻ | ڊاريڪٽري جي جوڙجڪ کي ISO ۾ ترتيب ڏيو file using Windows PE 10.0/11.0

To integrate the Dell Command | Configure directory into an ISO, copy it to the Windows PE working folder and create the Windows PE 10.0/11.0 image.

1. انسٽال ڪريو Windows 11 آپريٽنگ سسٽم.
2. Download and install Windows ADK for Windows 10/11 operating system.
3. Create a Windows PE 10.0/11.0 image.

Creating a Windows PE 10.0/11.0 image

1. Browse to the following location:.
   ● For 32-bit systems, C:\Program Files(x86)\Dell\Command Configure\X86.
   ● For 64-bit systems, C:\Program Files(x86)\Dell\Command Configure\X86_64.
2. منتظم جي استحقاق سان ڪمانڊ پرامٽ کوليو.
3. Run the following command: .
   ● Windows PE 10.0
   ○ For 32-bit systems, cctk_x86_64_winpe_10.bat C:\winpe_x86 C:\Progra~2\Dell\Comman~1.
   ○ For 64-bit systems, cctk_x86_64_winpe_10.bat C:\winpe_x86_64 C:\Progra~2\Dell\Comman~1.
   ● Windows PE 11.0
   ○ For 32-bit systems, cctk_x86_64_winpe_11.bat C:\winpe_x86 C:\Progra~2\Dell\Comman~1.
   ○ For 64-bit systems, cctk_x86_64_winpe_11.bat C:\winpe_x86_64 C:\Progra~2\Dell\Comman~1.
   نوٽ: پڪ ڪريو ته رستو جيڪو ڪمانڊ ۾ استعمال ڪيو ويو آهي اهو آهي ڊيل ڪمانڊ | فولڊر کي ترتيب ڏيو.
4. Copy the ISO image to the following location:
   ● For 32-bit systems, C:\winpe_x86\WIM.
   ● For 64-bit systems, C:\winpe_x86_64\WIM.

وسيلن ۽ حمايت

توھان پنھنجي پراڊڪٽ کي منتخب ڪندي گھربل دستاويز تائين رسائي ڪري سگھو ٿا.

1. ڏانهن وڃو سپورٽ | ڊيل.
2. ڪلڪ ڪريو سڀ پراڊڪٽس براؤز ڪريو.
3. ڪلڪ ڪريو Software & Solutions.
4. ڪلڪ ڪريو ڪلائنٽ سسٽم مينيجمينٽ.
5. ڪلڪ ڪريو Dell Command | Configure.
6. ڪلڪ ڪريو Select This Product.
7. جي طرف view گهربل دستاويز، گهربل پراڊڪٽ جو نالو ۽ ورزن نمبر تي ڪلڪ ڪريو.

نوٽ: جيڪڏهن توهان وٽ هڪ فعال انٽرنيٽ ڪنيڪشن نه آهي، توهان پنهنجي خريداري جي انوائس، پيڪنگ سلپ، بل، يا ڊيل پراڊڪٽ جي فهرست بابت رابطي جي معلومات ڳولي سگهو ٿا.

Dell provides several online and telephone-based support and service options. Availability varies by country or region and product, and some services may not be available in your area. To contact Dell for sales, technical support, or customer service issues:

1. وڃو سپورٽ | ڊيل.
2. پنھنجي سپورٽ جي درجي کي چونڊيو.
3. پنھنجي ملڪ يا علائقي جي تصديق ڪريو ھڪڙو ملڪ/علائقو چونڊيو ڊراپ ڊائون لسٽ صفحي جي تري ۾.
4. توهان جي ضرورت جي بنياد تي مناسب خدمت يا سپورٽ لنڪ چونڊيو.