FOXWELL BT60 بيٽري ٽيسٽر ۽ NT716 OBD2 اسڪينر استعمال ڪندڙ دستياب

تعارف

This manual provides detailed instructions for the safe and effective operation of your FOXWELL BT60 Car Battery Tester and FOXWELL NT716 OBD2 Scanner. The BT60 is designed to diagnose 6V and 12V automotive batteries, while the NT716 offers comprehensive OBD2 diagnostic and special functions for various vehicle systems. Please read this manual thoroughly before using the devices to ensure proper usage and to prevent damage.

اهم حفاظتي ڄاڻ

Always observe the following safety precautions when using the FOXWELL BT60 and NT716:

• گاڏي جي بيٽرين جي ويجهو ڪم ڪرڻ وقت مناسب اکين جي حفاظت ۽ حفاظتي لباس پائڻ.
• پڪ ڪريو ته گاڏي سٺي هوا واري علائقي ۾ آهي.
• Avoid sparks or open flames near the battery, as batteries can produce explosive gases.
• Do not touch hot engine parts or exhaust systems.
• ڊوائيسز کي سڪل ۽ صاف رکو. انهن کي نمي يا انتهائي گرمي پد جي سامهون نه رکو.
• صرف مهيا ڪيل ڪيبل ۽ لوازمات استعمال ڪريو.
• If battery acid comes into contact with skin or eyes, flush immediately with plenty of water and seek medical attention.

پيڪيج مواد

پڪ ڪريو ته سڀئي شيون توهان جي پيڪيج ۾ موجود آهن:

• FOXWELL BT60 Battery Tester Unit
• FOXWELL NT716 OBD2 Scanner Unit
• بيٽري ڪلamps (for BT60)
• OBD-II Diagnostic Cable (for NT716)
• استعمال ڪندڙ جو دستياب (ھي دستاويز)
• USB Cable (for updates/charging if applicable)

پيداوار ختمview

FOXWELL BT60 Battery Tester

The BT60 is a compact, wireless battery tester designed for 6V and 12V batteries. It connects via Bluetooth to a smartphone application for detailed analysis.

Figure 1: FOXWELL BT60 Battery Tester. This image displays the BT60 unit with its battery clamps and a list of its key functions: State of Health (SOH), State of Charge (SOC), Load Test, Battery Voltage, Resistance Test, Cranking Test, Ripple Test, Data Storage, and Data Share.

• بيٽري ڪلamps: For connecting to the vehicle battery terminals.
• LED اشارا: Provide status feedback (e.g., power, Bluetooth connection).
• بلوٽوت ماڊل: Enables wireless communication with the companion app.

FOXWELL NT716 OBD2 اسڪينر

The NT716 is a comprehensive diagnostic scanner featuring an Android 9.0 operating system, a touchscreen interface, and extensive vehicle coverage for various diagnostic and service functions.

Figure 2: FOXWELL NT716 OBD2 Scanner and BT60 Battery Tester. This image shows both the NT716 scanner and the BT60 battery tester, along with a smartphone displaying the BT60 app interface. The NT716 features an Android 9.0 operating system and highlights its capabilities for 4 systems diagnosis, 9 reset functions, full OBDII modes, and bi-directional control.

• ٽچ اسڪرين ڊسپلي: مينيو نيويگيٽ ڪرڻ لاءِ ۽ viewing diagnostic data.
• OBD-II Port: Connects to the vehicle's diagnostic link connector (DLC).
• USB پورٽ: چارج ڪرڻ ۽ ڊيٽا جي منتقلي لاء.
• وائي فائي ماڊل: For software updates and online features.

سيٽ اپ جون هدايتون

1. FOXWELL BT60 Battery Tester Setup

1. ايپ ڊائون لوڊ ڪريو: ڳولھيو the "FOXWELL BT60" app on your smartphone's app store (iOS or Android) and install it.
2. Charge the BT60 (if applicable): Ensure the BT60 unit has sufficient power.
3. بيٽري سان ڳنڍيو:
   • ڳنڍيو لال clamp to the positive (+) terminal of the vehicle battery.
   • ڳاڙهو cl سان ڳنڍيوamp گاڏي جي بيٽري جي منفي (-) ٽرمينل ڏانهن.
4. بلوٽوت ذريعي جوڙيو:
   • پنهنجي اسمارٽ فون تي بلوٽوت کي فعال ڪريو.
   • Open the BT60 app. The app will automatically search for and connect to the BT60 unit. Follow any on-screen prompts to complete pairing.
   

   Figure 3: BT60 Wireless Connection. This image illustrates the BT60 battery tester connected to a car battery in the trunk, communicating wirelessly via Bluetooth 5.3 with a smartphone held by a user in the driver's seat, demonstrating the convenience of independent testing from a distance of up to 10 meters.

2. FOXWELL NT716 OBD2 Scanner Setup

1. OBD-II پورٽ ڳوليو: The OBD-II port is typically located under the dashboard on the driver's side. Refer to your vehicle's manual if you cannot find it.
2. گاڏي سان ڳنڍيو: Plug the OBD-II diagnostic cable into the vehicle's OBD-II port and then connect the other end to the NT716 scanner. The scanner will power on automatically.
3. شروعاتي تشڪيل:
   • Upon first use, the device may prompt you to select a language, time zone, and other basic settings. Follow the on-screen instructions.
   • Connect to a Wi-Fi network for software updates. Navigate to سيٽنگون > وائي فائي ۽ پنهنجو نيٽ ورڪ چونڊيو.
   

   Figure 4: NT716 User Interface and Connectivity. This image highlights the NT716's user-friendly touchscreen interface, showing icons for Diagnostic, Maintenance, Update, Data Manager, My Account, and More. It also illustrates "One-Click Wifi Update Free Lifetime" and options for "One-Click Send/Share Report via E-mail," "One-click Screenshot to Save Data," and "One-click Feedback Problem to Foxwell Team."

4. سافٽ ويئر اپڊيٽ: It is recommended to perform a software update after initial setup to ensure you have the latest vehicle coverage and features. Navigate to the تازه ڪاري section on the main menu and follow the prompts.

آپريٽنگ هدايتون

1. Using the FOXWELL BT60 Battery Tester

The BT60 performs various tests to assess battery health and the vehicle's charging system.

1. ايپ شروع ڪريو: Ensure the BT60 is connected to the battery and Bluetooth is paired with your smartphone. Open the BT60 app.
2. Select Test Type: The app will present options for different tests, including:
   • بيٽري ٽيسٽ: Measures State of Health (SOH), State of Charge (SOC), Voltage, and Internal Resistance.
   • ڇڪڻ ٽيسٽ: انجڻ شروع ڪرڻ جي بيٽري جي صلاحيت جو جائزو وٺندو آهي.
   • چارج ٽيسٽ: Checks the alternator's output, including load/no-load voltagاي ۽ ريپل.
3. Perform Test: Follow the on-screen instructions within the app to initiate and complete each test. This may involve starting the engine for cranking or charging tests.
4. Review نتيجا: The app will display detailed results and recommendations.
   

   Figure 5: BT60 Test Results Display. This image shows a smartphone screen displaying the FOXWELL BT60 app interface, illustrating how battery status, charging test results, and cranking test results are presented clearly. It includes metrics like SOH, SOC, CCA, voltage, resistance, no-load voltage، لوڊ حجمtage, ripple, starting voltage, and start-up time.
5. Share Reports: The app allows you to customize battery serial numbers and share diagnostic reports via image or text.
   

   Figure 6: BT60 Report Sharing. This image demonstrates the BT60 app's capability to customize battery information and share diagnostic reports. Users can input battery details and then choose to share the report as an image or text, facilitating easy record-keeping and communication.

2. Using the FOXWELL NT716 OBD2 Scanner

The NT716 provides comprehensive vehicle diagnostics and service functions.

1. ڳنڍيو ۽ پاور آن ڪريو: Ensure the NT716 is connected to the vehicle's OBD-II port. The device will power on.
2. Select Diagnostic Function: From the main menu, tap تشخيصي to begin. The scanner will automatically identify the vehicle via Auto VIN or allow manual selection.
3. Perform System Scan:
   

   Figure 7: NT716 Four System Diagnosis. This image illustrates the NT716's ability to diagnose four key vehicle systems: Engine (Check Engine Light), ABS (ABS Light), Airbag (Airbag Light), and Transmission (Transmission Light). It also highlights features like Auto VIN, Read/Clear Codes, Live Data in Graphs, and ECU Information.

   • ڪوڊ پڙهو/صاف ڪريو: Access and clear Diagnostic Trouble Codes (DTCs) from various systems (Engine, ABS, Airbag, Transmission).
   • لائيو ڊيٽا: View ٽيڪسٽ يا گراف فارميٽ ۾ ريئل ٽائيم سينسر ڊيٽا.
   • ECU ڄاڻ: Retrieve Electronic Control Unit (ECU) details.
4. Special Functions / Reset Services: From the main menu, tap سار سنڀال to access various reset and service functions.
   

   Figure 8: NT716 Reset Functions. This image showcases nine common reset and service functions available on the NT716 scanner: Oil Reset Light, ABS Bleeding, Parking Brake, Injector Coding, BMS Reset, DPF Regeneration, SAS Calibration, TPMS, and Throttle Relearn.
   • تيل ري سيٽ: آئل سروس لائيٽ کي ري سيٽ ڪري ٿو.
   • ABS رت وهڻ: بريڪ بليڊنگ جي طريقيڪار کي انجام ڏئي ٿو.
   • پارڪنگ بريڪ: Services the electronic parking brake (EPB).
   • انجڪٽر ڪوڊنگ: Codes new injector numbers.
   • بي ايم ايس ري سيٽ: بيٽري مئنيجمينٽ سسٽم کي ري سيٽ ڪري ٿو.
   • ڊي پي ايف جي بحالي: Initiates Diesel Particulate Filter regeneration.
   • SAS حساب ڪتاب: Calibrates the Steering Angle Sensor.
   • TPMS: Tire Pressure Monitoring System service.
   • ٿروٽل ري لرن: Adapts the throttle body.
5. Bi-directional Control / Active Tests: This function allows the scanner to send commands to vehicle components to test their functionality.
   

   Figure 9: NT716 Bi-Directional Control. This image illustrates the NT716's bi-directional control capabilities, showing the scanner sending commands to various vehicle components for active testing. Examples include Test Fan Motor, Test Shift Solenoid Valve, Test Engine Coolant Temperature, and Active Grille Shutter. The process involves clicking Diagnostic, reading VIN, selecting model, clicking fault system, and performing the function test.

   • ڏانهن وڃو تشخيصي, select the vehicle, then choose the relevant system and look for فعال ٽيسٽ or Bi-directional Control اختيارن.
   • Follow on-screen prompts to activate components like the fan motor, shift solenoid valve, or engine coolant temperature.

سار سنڀال

• صفائي: نرم استعمال ڪريو، ڊيamp ڊوائيس صاف ڪرڻ لاءِ ڪپڙو جasings. Do not use abrasive cleaners or solvents.
• سافٽ ويئر اپڊيٽ: Regularly check for and install software updates for the NT716 via Wi-Fi to ensure optimal performance and the latest vehicle coverage. For the BT60, ensure your smartphone app is updated.
• اسٽوريج: Store the devices in a dry, cool environment, away from direct sunlight and extreme temperatures. Keep them in their original packaging or a protective case when not in use.
• ڪيبل جي چڪاس: Periodically inspect all cables for damage. Replace any frayed or damaged cables immediately.

مشڪلاتون

وضاحتون

FOXWELL BT60 Battery Tester

• بيٽري جلدtagاي جي حد: 6V، 12V
• ٽيسٽ معيار: CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB
• رابطي: Bluetooth 5.3 (up to 10m range)
• افعال: Battery Test (SOH, SOC, Voltage, Resistance), Cranking Test, Charging Test (Alternator)
• آپريٽنگ گرمي پد: 0°C کان 50°C (32°F کان 122°F)
• اسٽوريج جي درجه حرارت: -20 ° C کان 70 ° C (-4 ° F کان 158 ° F)

FOXWELL NT716 OBD2 اسڪينر

• آپريٽنگ سسٽم: Android 9.0
• ڏيکاريو: Touchscreen (size not specified, inferred from images)
• رابطي: OBD-II cable, Wi-Fi
• تشخيصي ڪم: Read/Clear DTCs, Live Data, ECU Information, Auto VIN, 4 System Diagnosis (Engine, ABS, Airbag, Transmission)
• خاص ڪم: Oil Reset, ABS Bleeding, Parking Brake, Injector Coding, BMS Reset, DPF Regeneration, SAS Calibration, TPMS, Throttle Relearn
• Bi-directional Control: ها
• تازه ڪاري: One-Click Wi-Fi Update (Lifetime Free)
• آپريٽنگ جلدtage: 9-18V DC (via OBD-II)

وارنٽي ڄاڻ

FOXWELL products are manufactured to high-quality standards and are warranted against defects in materials and workmanship for a specified period from the date of purchase. Please refer to the warranty card included with your product or visit the official FOXWELL website for detailed warranty terms and conditions. Keep your purchase receipt as proof of purchase.

ڪسٽمر سپورٽ

If you encounter any issues or have questions regarding your FOXWELL BT60 Battery Tester or NT716 OBD2 Scanner, please contact FOXWELL customer support. You can typically find contact information on the official FOXWELL website or through the "Feedback Problem to Foxwell Team" option within the NT716 device's interface (refer to Figure 4).

• آن لائن سپورٽ: Visit the official FOXWELL website for FAQs, software downloads, and support contact forms.
• اي ميل سپورٽ: Refer to your product packaging or the FOXWELL webڪسٽمر سپورٽ اي ميل ايڊريس لاءِ سائيٽ.
• In-App Feedback: Use the feedback function within the NT716 scanner to report issues directly to the FOXWELL team.