تعارف
This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your Perlegear Electric Ceiling TV Mount (Model PGCM10). Please read this manual thoroughly before installation and retain it for future reference. This motorized mount is designed for flat or curved screen TVs ranging from 32 to 70 inches, with a maximum weight capacity of 88 lbs and VESA mounting patterns from 200x100mm to 600x400mm.
اهم حفاظتي ڄاڻ
خبردار: Failure to read and follow all instructions may result in personal injury, property damage, or voiding of warranty. If you do not understand these instructions or have doubts about the safety of the installation, please contact customer support.
- Do not install on sloped ceilings. This mount is designed for flat roofs or concrete ceilings only.
- پڪ ڪريو ته چڙهڻ واري مٿاڇري محفوظ طور تي ماؤنٽ ۽ ٽي وي جي گڏيل وزن کي سپورٽ ڪري سگهي ٿي.
- Use only the provided hardware. If any parts are missing or defective, contact Perlegear customer support.
- وڌ ۾ وڌ وزن جي گنجائش 88 پائونڊ (40 ڪلوگرام) کان وڌيڪ نه ڪريو.
- ھن پراڊڪٽ ۾ نن smallڙيون شيون شامل آھن جيڪي نگلجي وڃڻ کان پوءِ ڇڪي سگھن ٿيون. ٻارن کان پري رکيو.
- Always use a stud finder to locate wood joists or ensure concrete is suitable for drilling.
- Two people are recommended for installation to ensure safety.
پيڪيج مواد
انسٽاليشن سان اڳتي وڌڻ کان اڳ پڪ ڪريو ته سڀئي جزا موجود آهن ۽ انهن کي ڪو نقصان نه پهتو آهي.
Image: All components of the Perlegear Electric Ceiling TV Mount, including the main motorized unit, remote control, and various hardware bags.
- Motorized Ceiling Mount Unit
- TV Bracket Assembly (various parts)
- ريموٽ ڪنٽرول (2 AAA بيٽرين جي ضرورت آهي، شامل نه آهي)
- پاور اڊاپٽر
- Hardware Kit (bolts, washers, spacers, Allen key, wrench)
- سوراخ ڪرڻ وارو سانچو
- ھدايت وارو دستور
وضاحتون
| خاصيت | تفصيل |
|---|---|
| ماڊل نمبر | PGCM10 |
| ٽي وي سائز مطابقت | 32" - 70" Flat and Curved Screens |
| وڌ ۾ وڌ لوڊ گنجائش | 88 پائونڊ (40 ڪلوگرام) |
| VESA چڙهڻ جا نمونا | 200x100mm کان 600x400mm تائين |
| جھلڻ جي ترتيب | 0° - 75° |
| ليولنگ ايڊجسٽمينٽ | ±2° (Manual) |
| Full Expansion Time | 32 سيڪنڊ |
| موٽر پاور | 150W |
| مواد | مصر جو اسٽيل |
| ريموٽ ڪنٽرول رينج | 33 فوٽن تائين |
Image: Visual summary of compatibility: TV size 32"-70", Max VESA 600x400mm, Min VESA 200x100mm, Max Load 88 lbs. Compatible with wood joist and wood wall installations.
سيٽ اپ ۽ تنصيب
Before beginning, ensure you have all necessary tools and that the mounting location is suitable. This mount is not compatible with sloped ceilings.
Step 1: Function Test
Before full installation, perform a function test to ensure the motorized unit is working correctly.
- Connect the power adapter to the motorized ceiling mount unit.
- پاور اڊاپٽر کي پاور آئوٽليٽ ۾ لڳايو.
- ريموٽ ڪنٽرول ۾ 2 AAA بيٽريون (شامل نه آهن) داخل ڪريو.
- Use the remote control to extend and retract the mount. Verify smooth operation.
Video: An official Perlegear video demonstrating the motorized extension and retraction of the ceiling TV mount, highlighting its smooth operation.
Step 2: Attach the TV Bracket Assembly
Assemble the TV bracket arms to the center plate using the provided bolts and nuts. Ensure all connections are secure.
Image: The TV bracket assembly process, showing the attachment of the horizontal arms to the central plate.
Step 3: Attach the TV Bracket Assembly to Your TV
Depending on your TV's back panel design (flat or curved/with a bump), select the appropriate mounting option and use the correct screws and spacers from the hardware kit. Ensure the bracket is centered and securely fastened to the TV's VESA holes.
Image: Diagram illustrating the wide compatibility of the mount with various TV sizes (32"-70") and VESA patterns, along with the maximum load capacity of 88 lbs.
Video: Official Perlegear installation video for the PGCM10, demonstrating how to attach the TV bracket assembly to the TV, including options for flat and curved back TVs.
Step 4: Attach the Mount to the Ceiling
Locate the wood joists or suitable concrete area in your ceiling. Use the drilling template to mark pilot holes. Secure the main ceiling mount unit using the appropriate lag bolts for your ceiling type. Ensure the mount is firmly attached and level.
- For Wood Joists: Use a stud finder to locate the center of the wood joists. Mark and drill pilot holes. Secure the mount with lag bolts.
- For Concrete Ceilings: Use a concrete drill bit to drill pilot holes. Insert concrete anchors (not included, but typically required for concrete installations) and then secure the mount with lag bolts.
Image: The motorized ceiling mount securely installed, demonstrating its robust construction and ability to support a TV.
Step 5: Hang the TV on the Ceiling Mount
Carefully lift the TV (with the attached bracket) and align the keyhole slots on the TV bracket with the corresponding bolts on the ceiling mount. Slide the TV into place and ensure it is securely seated. Partially tighten the bolts to allow for level adjustment.
Image: The TV is shown attached to the ceiling mount, demonstrating its ability to extend and retract, and highlighting the 75-degree tilt and ±2° leveling features.
قدم 6: سطح جي ترتيب
Before fully tightening the bolts, use the manual ±2° leveling feature to fine-tune your TV's horizontal position. Once level, fully tighten all bolts to secure the TV in place.
قدم 7: ڪيبل انتظام
Organize and secure all cables using the provided cable straps. This prevents cables from interfering with the motorized mechanism and ensures a clean, tidy appearance.
Image: A comparison illustrating effective cable management with the Perlegear mount, showing neatly secured cables, versus a cluttered appearance with unmanaged cables.
آپريٽنگ هدايتون
The Perlegear Electric Ceiling TV Mount is operated using the included remote control.
- Extend/Retract: کي دٻايو UP or هيٺ buttons on the remote to extend or retract the TV. The mount offers a full expansion in approximately 32 seconds.
- جھلڻ جي ترتيب: The mount allows for a tilt range of 0° to 75°. Use the remote control to adjust the tilt angle to your preferred viewپوزيشن.
- Stopping at Any Angle: You can stop the movement at any desired angle by pressing any button on the remote during extension or retraction.
- Manual Leveling: After installation, if minor leveling adjustments are needed, use the manual ±2° leveling feature on the TV bracket.
Image: The remote control in use, demonstrating its sensitive operation and 33 ft range to adjust the TV's tilt from the ceiling.
سار سنڀال
- باقاعدي طور تي چيڪ ڪريو ته سڀئي اسڪرو ۽ ڪنيڪشن تنگ ۽ محفوظ آهن.
- Clean the mount and TV with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Do not lubricate the motorized parts unless specifically instructed by Perlegear customer support.
- Ensure cables remain properly managed and do not interfere with moving parts.
مشڪلاتون
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| Mount does not respond to remote. | Dead batteries in remote, power not connected. | Replace remote batteries. Check power adapter connection to mount and outlet. |
| Mount movement is jerky or stops. | Obstruction, overloaded weight. | Check for any obstructions. Ensure TV weight does not exceed 88 lbs. |
| ٽي وي ليول نه آهي. | Leveling bolts not adjusted correctly. | Adjust the manual ±2° leveling bolts on the TV bracket. |
وارنٽي ۽ ڪسٽمر سپورٽ
Perlegear offers a comprehensive warranty for its products. For specific warranty details, product support, or any questions regarding installation or operation, please contact our U.S.-based product support team. Refer to the product packaging or the official Perlegear webموجوده رابطي جي معلومات لاءِ سائيٽ.
رابطو: Please refer to the Perlegear official website or your purchase documentation for the most up-to-date customer support contact details.
