1. اهم حفاظتي ڄاڻ
هن پاور ٽول سان مهيا ڪيل سڀني حفاظتي ڊيڄاريندڙن، هدايتن، تصويرن، ۽ وضاحتن کي هميشه پڙهو ۽ سمجھو. هيٺ ڏنل سڀني هدايتن تي عمل ڪرڻ ۾ ناڪامي بجليءَ جو جھٽڪو، باهه، ۽/يا سنگين زخمي ٿي سگهي ٿي.
- ڪم واري علائقي جي حفاظت: پنهنجي ڪم واري علائقي کي صاف ۽ روشن رکو. گندو يا اونداهو علائقو حادثن کي دعوت ڏئي ٿو. بجلي جا اوزار ڌماڪيدار ماحول ۾ نه هلايو، جهڙوڪ ٻرندڙ مائع، گئس، يا مٽي جي موجودگي ۾. بجلي جا اوزار چنگاري پيدا ڪن ٿا جيڪي مٽي يا دونهون کي باهه ڏئي سگهن ٿا.
- برقي حفاظت: پاور ٽول پلگ کي آئوٽ ليٽ سان ملائڻ گهرجي. ڪڏهن به پلگ کي ڪنهن به طرح تبديل نه ڪريو. ڪنڊ جو غلط استعمال نه ڪريو. ڪڏهن به پاور ٽول کي کڻڻ، ڇڪڻ، يا ان پلگ ڪرڻ لاءِ ڪنڊ استعمال نه ڪريو. ڪنڊ کي گرمي، تيل، تيز ڪنارن، يا حرڪت ڪندڙ حصن کان پري رکو.
- ذاتي حفاظت: Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol, or medication. Always wear eye protection. Use safety glasses, goggles, or a face shield.
- اوزار استعمال ۽ سنڀال: پاور ٽول کي زور سان نه لڳايو. پنهنجي ايپليڪيشن لاءِ صحيح پاور ٽول استعمال ڪريو. صحيح پاور ٽول ڪم کي بهتر ۽ محفوظ طريقي سان ڪندو جنهن لاءِ ان کي ٺاهيو ويو هو. ڪنهن به ترتيب ڏيڻ، لوازمات تبديل ڪرڻ، يا پاور ٽولز کي ذخيرو ڪرڻ کان اڳ پاور سورس کان پلگ ڊسڪنيڪٽ ڪريو ۽/يا بيٽري پيڪ، جيڪڏهن الڳ ڪري سگهجي ٿو، پاور ٽول مان هٽايو.
- بيٽري پيڪ جو استعمال ۽ سنڀال: ري چارج صرف ٺاهيندڙ طرفان بيان ڪيل چارجر سان. هڪ چارجر جيڪو هڪ قسم جي بيٽري پيڊ لاءِ موزون آهي اهو شايد باهه جو خطرو پيدا ڪري سگهي ٿو جڏهن ٻئي بيٽري پيڪ سان استعمال ڪيو وڃي. پاور اوزار استعمال ڪريو صرف خاص طور تي نامزد ٿيل بيٽري پيڪ سان.
2. پيڪيج مواد
احتياط سان سڀئي شيون کوليو ۽ پڪ ڪريو ته توهان کي هيٺ ڏنل شيون ملي ويون آهن:
- BATAVIA Cordless Drill (BT-CTD001)
- 20V MAX 2.0Ah Lithium-Ion Battery
- 2.4A بيٽري چارجر
- ھدايت وارو دستور
Image: The BATAVIA Cordless Drill, including the main unit, a 20V MAX 2.0Ah Lithium-Ion battery, and a 2.4A battery charger.
3. پراڊڪٽ ختمview
Familiarize yourself with the components of your BATAVIA Cordless Drill:
Image: A detailed diagram highlighting key components of the BATAVIA Cordless Drill, including the 3/8" Keyless Chuck, Screw Bit Holder, LED Work Light, Battery Release Button, 20V 2.0Ah Battery, Belt Clip, 11+1 Torque Selector, Trigger Switch, Forward & Reverse Switch, and Variable 2-Speed Gear switch.
- Dual Rotating Chucks: Features both a 3/8" keyless chuck for drilling and a 1/4" hex chuck for driving, allowing quick transitions between tasks.
- 11+1 ٽورڪ سيٽنگون: Provides precise control for various applications and materials.
- 2 متغير رفتار: Offers two speed ranges (0-400 RPM and 0-1500 RPM) for optimal performance in different drilling and driving scenarios.
- Automatic LED Work Light: گهٽ روشني واري حالتن ۾ بهتر نمائش لاءِ ڪم واري علائقي کي روشن ڪري ٿو.
- بيلٽ ڪلپ: Conveniently attaches the drill to your belt for easy access.
4. سيٽ اپ
4.1 بيٽري کي چارج ڪرڻ
- Ensure the battery is securely inserted into the 2.4A battery charger.
- چارجر کي معياري 120V AC اليڪٽريڪل آئوٽليٽ ۾ لڳايو.
- The indicator lights on the charger will show the charging status. A full charge typically takes less time due to the 2.4A charger.
- مڪمل چارج ٿيڻ کان پوءِ، چارجر کي آئوٽ ليٽ کان ڌار ڪريو ۽ بيٽري ڪڍي ڇڏيو.
4.2 بيٽري لڳائڻ/هٽائڻ
- To install: Align the battery with the base of the drill handle and slide it in until it clicks securely into place.
- To remove: Press the battery release button located on the front of the battery pack and slide the battery out.
4.3 Using the Dual Rotating Chucks
This drill features a unique dual rotating chuck system for quick changes between drilling and driving tasks.
Image: The BATAVIA Cordless Drill demonstrating its dual rotating chuck feature, allowing users to switch between a drill bit and a screwdriver bit by rotating the chuck assembly.
- For Drilling (3/8" Keyless Chuck): Rotate the front section of the drill head to expose the 3/8" keyless chuck. Insert the drill bit and tighten the chuck by hand until the bit is secure.
- For Driving (1/4" Hex Chuck): Rotate the front section of the drill head to expose the 1/4" hex chuck. Insert the screwdriver bit directly into the hex opening until it locks into place.
5. آپريٽنگ هدايتون
5.1 Setting Torque (11+1 Settings)
The torque selector ring allows you to adjust the amount of rotational force the drill applies. This is crucial for preventing overtightening screws or damaging materials.
Image: The BATAVIA Cordless Drill highlighting its 11+1 torque settings, with recommendations for low settings for small screws/soft materials and high settings for large screws/hard materials.
- Rotate the torque selector ring to choose a setting from 1 to 11. Lower numbers are for smaller screws or softer materials, while higher numbers are for larger screws or harder materials.
- The 'Drill' symbol (often indicated as 'MAX' or a drill icon) bypasses the clutch for maximum torque, suitable for drilling applications.
5.2 Selecting Speed (2 Variable Speeds)
The drill features a 2-speed gearbox to match the speed to the application.
Image: The BATAVIA Cordless Drill showing its adjustable variable 2-speed gear selector. Gear 1 (0-400 RPM) is recommended for large diameter drilling, and Gear 2 (0-1500 RPM) for small diameter drilling.
- Gear 1 (0-400 RPM): Use for high-torque applications, such as driving large screws or drilling large holes in tough materials.
- Gear 2 (0-1500 RPM): Use for high-speed applications, such as drilling small holes or driving small screws quickly.
- The trigger switch provides variable speed control within the selected gear range. Pressing the trigger further increases the speed.
5.3 فارورڊ/ريورس سوئچ
The forward/reverse switch is located above the trigger. It controls the direction of rotation.
- Push the switch to the left for forward rotation (for drilling and driving screws).
- Push the switch to the right for reverse rotation (for removing screws or backing out drill bits).
- When the switch is in the center position, the trigger is locked, preventing accidental starting.
5.4 Automatic LED Work Light
جڏهن ٽرگر کي دٻايو ويندو آهي ته بلٽ ان ايل اي ڊي لائيٽ پاڻمرادو روشن ٿي ويندي آهي، جيڪا مدھم روشني واري ڪم وارن علائقن ۾ نمائش فراهم ڪندي آهي.
Image: The BATAVIA Cordless Drill in use, with its bright LED light illuminating the work surface, demonstrating its utility in dark or confined spaces.
6. سار سنڀال
باقاعده سار سنڀال توهان جي ڊرل جي ڊگهي عمر ۽ بهترين ڪارڪردگي کي يقيني بڻائي ٿي.
- صفائي: هر استعمال کان پوءِ، ڊرل کي صاف، ڊي سان صاف ڪريوamp ڪپڙو. سخت ڪيميڪل يا رگڙيندڙ صاف ڪندڙ استعمال نه ڪريو. وينٽيليشن جي سوراخن کي مٽي ۽ ملبي کان صاف رکو.
- اسٽوريج: Store the drill, battery, and charger in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the battery is removed from the drill before storage.
- بيٽري جي سنڀال: بيٽرين کي خارج ٿيل حالت ۾ نه رکو. جيڪڏهن گهڻي عرصي تائين استعمال ۾ نه هجي ته انهن کي وقت بوقت چارج ڪندا رهو.
7. مسئلا حل ڪرڻ
If you encounter issues with your BATAVIA Cordless Drill, refer to the following common problems and solutions:
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| ڊرل شروع نه ٿي ٿئي. | Battery not charged or not properly inserted. Forward/Reverse switch in locked (center) position. | Ensure battery is fully charged and securely inserted. Move Forward/Reverse switch to forward or reverse position. |
| بيٽري چارج نه ٿي. | چارجر پلگ ان نه آهي. خراب بيٽري يا چارجر. | Check power outlet and charger connection. If problem persists, contact customer support. |
| ڊرل ۾ طاقت جي کوٽ آهي يا استعمال دوران بند ٿي ويندي آهي. | Battery low on charge. Overload protection activated. | Recharge battery. Reduce pressure on the drill or use a lower speed setting for tough materials. |
| چڪ بِٽ کي محفوظ طور تي نه جهلي رهيو آهي. | Bit not inserted deep enough. Chuck not tightened properly. | Ensure bit shank is fully inserted into the chuck. Tighten the keyless chuck firmly by hand. |
8. وضاحتون
| خاصيت | تفصيل |
|---|---|
| ماڊل نمبر | BT-CTD001 |
| برانڊ | باتويا |
| طاقت جو ذريعو | بيٽري سان هلندڙ |
| بيٽري جو قسم | 20V MAX 2.0Ah Lithium-Ion |
| چارجر Ampعمر | 2.4 Amps |
| وڌ ۾ وڌ گھمڻ واري رفتار | 1500 RPM |
| رفتار جو تعداد | 2 (0-400 RPM & 0-1500 RPM) |
| Torque سيٽنگون | 11+1 |
| وڌ ۾ وڌ چيڪ سائيز | 3/8 Inches (Keyless Chuck) |
| مواد | PA6-GF30 |
| پيداوار جي ماپ (L x W x H) | 8.07" x 3.34" x 14.5" |
| شيءِ جو وزن | 5.28 پائونڊ |
| خاص خاصيتون | Adjustable Torque, Built-In LED Working Light, Compact, Cordless, Variable Speed |
| سرٽيفڪيشن | ETL تصديق ٿيل |
9. وارنٽي ۽ سپورٽ
BATAVIA products are designed and manufactured to the highest quality standards. This product is ETL certified, ensuring product quality and safety.
For any questions, technical assistance, or warranty claims, please contact BATAVIA customer service:
- فون: (+1) 866-272-5789
- Operating Hours (EDT): 10am - 7pm
- Operating Hours (PDT): 7am - 4pm
Please have your model number (BT-CTD001) and purchase information ready when contacting support.
