Focal SUB10DUAL

فوڪل SUB10DUAL 10 انچ ڊول 4-اوهم وائيس ڪوئل سب ووفر هدايت نامو

برانڊ: فوڪل | ماڊل: SUB10DUAL

1. تعارف ۽ اوورview

This manual provides essential information for the proper installation, operation, and maintenance of your Focal SUB10DUAL 10-inch Dual 4-Ohm Voice Coil Subwoofer. Designed for powerful and deep bass reproduction, this subwoofer features a robust design and a dual voice coil configuration for flexible wiring options and enhanced performance.

اهم خاصيتون شامل آهن:

  • Deep and powerful bass reproduction.
  • Versatile for use in bass-reflex or sealed enclosures.
  • Minimum sealed box volume from 10 liters.
  • Parallel voice coil connection for increased Sound Pressure Level (SPL).
  • Robust construction for durability.

2. حفاظت جي ڄاڻ

Please read and understand all safety instructions before installing or operating this product. Failure to do so may result in injury or damage to the equipment.

  • پيشه ورانه تنصيب جي سفارش ڪئي وئي آهي: For optimal performance and safety, it is highly recommended that this subwoofer be installed by a qualified professional.
  • وڏي مقدار کان بچڻ: Prolonged exposure to high sound pressure levels can cause permanent hearing damage. Always listen at moderate levels.
  • مناسب وائرنگ: Ensure all wiring is correctly connected and insulated to prevent short circuits, electrical fires, or damage to the amplifier and subwoofer. Refer to the wiring diagrams in this manual.
  • محفوظ لڳائڻ: The subwoofer must be securely mounted to prevent it from becoming a projectile in the event of sudden stops or collisions.
  • وينٽيليشن: سب ووفر جي چوڌاري مناسب وينٽيليشن کي يقيني بڻايو ۽ ampوڌيڪ گرم ٿيڻ کان بچڻ لاءِ لائفائر.

3. پيڪيج مواد

Carefully unpack your Focal SUB10DUAL subwoofer and check that all items are present and in good condition. If any items are missing or damaged, contact your dealer immediately.

  • 1x Focal SUB10DUAL 10-inch Subwoofer

4. تنصيب ۽ سيٽ اپ

Proper installation is crucial for the performance and longevity of your subwoofer. Consider the following guidelines:

4.1 چڙهڻ

The SUB10DUAL is designed for flush mounting. Ensure the mounting surface is rigid and capable of supporting the subwoofer's weight. Create an opening of the appropriate diameter, ensuring a snug fit. Use appropriate fasteners to secure the subwoofer firmly.

4.2 انڪلوزر سفارشون

This subwoofer is effective in both sealed and bass-reflex enclosures. The minimum recommended sealed box volume is 10 liters. Consult with a professional installer or refer to specialized audio resources for optimal enclosure design based on your desired sound characteristics and vehicle acoustics.

4.3 Subwoofer Components Diagram

Understanding the components of your subwoofer can aid in installation and troubleshooting.

Diagram of Focal SUB10DUAL subwoofer components

تصوير جي وضاحت: A detailed diagram illustrating the various components of the Focal SUB10DUAL subwoofer, including the butyl surround, steel chassis, polypropylene cone, spider decompression, and push terminals. Each component is labeled with its function, such as 'Superior resistance' for the butyl surround and 'Rigid and compact' for the steel chassis.

5. وائرنگ ترتيبون

The Focal SUB10DUAL features a dual 4-ohm voice coil, offering flexibility in wiring to match your amplifier's impedance requirements. Always ensure the ampچونڊيل رڪاوٽ تي لائفائر مستحڪم آهي.

5.1 Parallel Wiring (2 Ohms)

Connecting the two 4-ohm voice coils in parallel will result in a 2-ohm load. This configuration is often used to maximize power output from amplifiers that are stable at 2 ohms, leading to higher Sound Pressure Level (SPL).

  • Connect the positive terminal of Voice Coil 1 to the positive terminal of Voice Coil 2.
  • Connect the negative terminal of Voice Coil 1 to the negative terminal of Voice Coil 2.
  • Connect the combined positive terminals to the amplifier's positive output.
  • Connect the combined negative terminals to the ampلائفائر جو منفي آئوٽ پُٽ.

5.2 Series Wiring (8 Ohms)

Connecting the two 4-ohm voice coils in series will result in an 8-ohm load. This configuration is suitable for amplifiers that require a higher impedance load or when multiple subwoofers are used in a system.

  • Connect the positive terminal of Voice Coil 1 to the amplifier's positive output.
  • Connect the negative terminal of Voice Coil 1 to the positive terminal of Voice Coil 2.
  • Connect the negative terminal of Voice Coil 2 to the ampلائفائر جو منفي آئوٽ پُٽ.

اهم: Always verify the final impedance with a multimeter before connecting to an amplifier. Incorrect impedance can damage your ampلائفائر يا ذيلي ووفر.

6. آپريٽنگ هدايتون

6.1 Initial Use and Break-in

Like all new speakers, your subwoofer requires a break-in period to achieve optimal performance. During the first few hours of use (approximately 10-20 hours), operate the subwoofer at moderate volume levels. This allows the suspension components to loosen and settle, improving bass response and overall sound quality.

6.2 Ampلائفائر سيٽنگون

صحيح طور تي توهان جي ترتيب ڏيڻ amplifier's gain, crossover, and phase controls is essential for integrating the subwoofer seamlessly with your main speakers. Consult your amplifier's manual for detailed instructions. Start with low gain settings and gradually increase until the desired bass level is achieved without distortion.

7. سار سنڀال

Your Focal SUB10DUAL subwoofer requires minimal maintenance to ensure long-lasting performance.

  • صفائي: Use a soft, dry cloth to gently wipe the cone and surround. Avoid using harsh chemicals or abrasive cleaners.
  • چڪاس: Periodically inspect the wiring connections for tightness and corrosion. Check the cone and surround for any signs of damage or wear.
  • ماحول: سب ووفر کي انتهائي گرمي پد، سڌي سج جي روشني ۽ نمي کان بچايو.

8. مسئلا حل ڪرڻ

جيڪڏهن توهان کي پنهنجي سب ووفر سان مسئلا درپيش اچن ٿا، ته هيٺ ڏنل عام مسئلن ۽ حلن جو حوالو ڏيو:

مسئلوممڪن سببحل
ڪو آوازجي طاقت ناهي ampلفٽ ڪندڙ؛ غلط وائرنگ؛ amplifier in protect mode; source unit issue.چيڪ ڪريو amplifier power and ground connections. Verify all wiring connections to the subwoofer and ampلفٽ ڪندڙ. چيڪ ڪريو amplifier fuses. Ensure source unit is sending an audio signal.
بگڙيل آوازGain set too high; incorrect crossover settings; damaged voice coil; enclosure issues.گھٽائڻ amplifier gain. Adjust crossover frequency. Inspect subwoofer cone and surround for damage. Ensure enclosure is sealed and free of air leaks (if applicable).
ڪمزور بيسIncorrect phase setting; insufficient power; improper enclosure volume.ترتيب ڏيڻ amplifier phase control (0 or 180 degrees). Ensure amplifier provides adequate power for the subwoofer. Verify enclosure volume matches recommendations.
سب ووفر جو وڌيڪ گرم ٿيڻUnder-powered amplifier; impedance mismatch; prolonged high volume use.يقين ڏياريو amplifier power matches subwoofer RMS rating. Verify correct impedance wiring. Reduce listening volume. Ensure adequate ventilation.

If the problem persists after attempting these solutions, contact your authorized Focal dealer or a qualified service technician.

9. وضاحتون

Detailed technical specifications for the Focal SUB10DUAL subwoofer:

تفصيلتفصيل
برانڊفوڪل
ماڊل نالوSUB10DUAL
اسپيڪر جو قسمSubwoofer, Surround Sound
خاص خصوصيتهاءِ ريز آڊيو
Subwoofer قطر10 انچ (25 سينٽي ميٽر)
اسپيڪر وڌ ۾ وڌ آئوٽ پاور500 واٽ (وڌ ۾ وڌ)
RMS پاور هينڊلنگ250 واٽ
وائيس ڪوئل جي ترتيبٻٽي 4-اوهم
موادSteel, Polypropylene
رابطي ٽيڪنالاجيوائرڊ
پيداوار جي ماپ18"ڊي x 8"ڊي x 14"ايڇ
شيءِ جو وزن8.67 پائونڊ
چڙهڻ جو قسمجبل چشمو
شامل اجزاءSUB10DUAL
ٺاهيندڙفوڪل
تاريخ پهرين دستيابسيپٽمبر 7، 2022

10. وارنٽي ۽ سپورٽ

The Focal SUB10DUAL subwoofer comes with a limited warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included with your product or contact your authorized Focal dealer. Keep your proof of purchase for warranty claims.

ڪسٽمر سپورٽ

For technical assistance, troubleshooting, or service inquiries, please contact your authorized Focal dealer or visit the official Focal webسپورٽ وسيلن لاء سائيٽ.

11. پراڊڪٽ جون تصويرون

Visual references for the Focal SUB10DUAL subwoofer:

زاويه view of Focal SUB10DUAL subwoofer
تصوير جي وضاحت: هڪ زاويه وارو view of the Focal SUB10DUAL 10-inch subwoofer, showcasing its black cone, robust surround, and the Focal logo. The terminals are visible at the bottom.
سامهون view of Focal SUB10DUAL subwoofer cone
تصوير جي وضاحت: سڌو محاذ view of the Focal SUB10DUAL subwoofer, highlighting the large black cone and the central Focal logo. The mounting holes around the rim are also visible.
پاسي view of Focal SUB10DUAL subwoofer showing terminals
تصوير جي وضاحت: A side-angled view of the Focal SUB10DUAL subwoofer, providing a clearer look at the depth of the speaker and the dual push terminals for wiring connections.
ريڙهه view of Focal SUB10DUAL subwoofer showing magnet
تصوير جي وضاحت: هڪ پٺيرو view of the Focal SUB10DUAL subwoofer, displaying the large magnet structure and the back of the voice coil assembly. The wiring terminals are also visible.