تعارف
This manual provides detailed instructions for the safe and efficient operation, setup, maintenance, and troubleshooting of the CAT 18V 1 FOR ALL 4-Amp Battery Charger, model DXC4. Please read this manual thoroughly before using the charger to ensure proper function and to prevent injury or damage. Keep this manual for future reference.
Image: The CAT 18V 1 FOR ALL 4-Amp Battery Charger (DXC4) from a top-front angle, showcasing its black and yellow design with the CAT logo and model number clearly visible.
حفاظت جي ڄاڻ
باهه، بجليءَ جي جھٽڪي، ۽ ذاتي زخمن جي خطري کي گهٽائڻ لاءِ بجليءَ جا سامان استعمال ڪرڻ وقت هميشه بنيادي حفاظتي احتياطن تي عمل ڪريو.
- چارجر استعمال ڪرڻ کان اڳ سڀ هدايتون پڙهو.
- غير ريچارجبل بيٽرين کي چارج نه ڪريو.
- Use only with CAT 18V Li-Ion and Graphene batteries.
- چارجر کي نه ڏيکاريو مينھن يا گلي جي حالتن کي.
- Do not operate the charger if it has received a sharp blow, been dropped, or damaged in any way.
- چارجر کي ڌار نه ڪريو. سڀني سروسنگ کي قابل سروس اهلڪارن جي حوالي ڪريو.
- Ensure proper ventilation during charging. Do not block ventilation openings.
- جڏهن استعمال ۾ نه هجي يا صفائي ڪرڻ کان اڳ چارجر کي پاور آئوٽليٽ مان ڪڍو.
پيداوار جون خاصيتون
The CAT DXC4 Battery Charger incorporates several features designed for efficient and safe battery charging:
- Charging Diagnostics: Provides real-time information on battery health and charge status.
- Charge Management System (CMS): Intelligently identifies each battery pack to optimize charging time.
- 1 FOR ALL Compatibility: Designed to protect and charge all CAT 18V Li-Ion and Graphene batteries.
- فين کولنگ: An internal fan dissipates heat during charging, contributing to faster charge times and battery longevity.
Image: An annotated diagram of the CAT DXC4 charger, pointing out the locations of the Fan Cooling system, Charging Diagnostics display, and Charge Management System.
پيڪيج مواد
پيڪنگ ڪرڻ وقت پڪ ڪريو ته سڀئي شيون موجود آهن:
- 1x CAT 18V 1 FOR ALL 4-Amp Battery Charger (DXC4)
- 1x هدايت نامو (هي دستاويز)
Image: The CAT DXC4 18V 4A Battery Charger, indicating it is the primary item included in the package.
سيٽ اپ ڪريو
- لڳائڻ: Place the charger on a stable, flat surface in a well-ventilated area, away from direct sunlight, heat sources, and moisture. Ensure the ventilation slots are not obstructed.
- پاور ڪنيڪشن: Plug the charger's power cord into a standard 240V AC electrical outlet. The charger's indicator lights may briefly illuminate.
آپريشن
بيٽري چارج ڪرڻ
- پڪ ڪريو ته چارجر پاور سرچ ۾ پلگ ان ٿيل آهي.
- Align the battery pack with the charging port on the charger. Slide the battery onto the charger until it clicks into place.
- The charger will automatically begin the charging process. The Charging Diagnostics indicators will display the battery's status.
- Once charging is complete, the indicators will show a full charge. Remove the battery by pressing the release button (if present) and sliding it off the charger.
چارجنگ اشارا
The DXC4 charger features LED indicators to communicate the battery's charging status and health:
- گرين چمڪائڻ: بيٽري چارج ٿي رهي آهي.
- سڪل سائو: بيٽري مڪمل طور تي چارج ٿيل آهي.
- ڳاڙهو چمڪندڙ: Battery or charger error (e.g., battery too hot/cold, faulty battery). Refer to the Troubleshooting section.
- مضبوط ڳاڙهو: Battery fault or charger fault. Disconnect and re-attempt. If issue persists, contact support.
تصوير: هڪ ويجهو تصوير view of the CAT DXC4 charger's diagnostic panel, showing the LED indicators for charging status and battery health.
تصوير: هڪ اندروني view illustration of the CAT DXC4 charger, highlighting the airflow generated by the internal fan to cool batteries during charging.
سار سنڀال
- صفائي: Disconnect the charger from the power supply before cleaning. Use a dry, soft cloth to wipe the exterior. Do not use water or chemical cleaners.
- اسٽوريج: Store the charger in a dry, indoor location when not in use. Avoid extreme temperatures.
- چڪاس: Periodically inspect the power cord and charger housing for any signs of damage. Do not use a damaged charger.
مشڪلاتون
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| چارجر ڪم نه ڪري رهيو آهي | چارجر کي طاقت نه آهي. | Check if the power cord is securely plugged into the outlet and the charger. Verify the outlet has power. |
| Red flashing indicator | Battery too hot/cold, or battery fault. | Allow the battery to reach room temperature. If the issue persists, the battery may be faulty. |
| مضبوط لال اشارو | Charger fault or severe battery fault. | Disconnect the battery and unplug the charger. Wait a few minutes, then reconnect. If the error persists, contact customer support. |
| سست چارج | Poor ventilation or extreme ambient temperature. | Ensure the charger is in a well-ventilated area. Avoid charging in very hot or cold environments. |
وضاحتون
| خاصيت | تفصيل |
|---|---|
| ماڊل نمبر | DXC4 |
| برانڊ | CAT |
| انٽ واليمtage | 240 وولٽ |
| اوٽ وولٽtage | 18 وولٽ (DC) |
| موجوده چارج | 4 Amps |
| مطابقت رکندڙ بيٽري | CAT 18V Li-Ion and Graphene batteries |
| پيداوار جي ماپ | 5.3 x 2.4 x 6.5 انچ |
| شيءِ جو وزن | 1.48 پائونڊ |
| ٺاهيندڙ | ڪيٽرپلر |
وارنٽي ۽ سپورٽ
For warranty information, please refer to the warranty card included with your product or visit the official CAT Tools website. For technical support, service, or replacement parts, please contact CAT customer service through their official channels.
توهان وڌيڪ معلومات ۽ سپورٽ وسيلا ڳولي سگهو ٿا دورو ڪندي Amazon تي CAT اسٽور.
1 FOR ALL Battery Platform
The CAT DXC4 charger is part of the 1 FOR ALL battery platform, meaning it is compatible with all CAT 18V cordless products. This allows for interchangeability of batteries across various tools, enhancing versatility and convenience.
Image: An illustration demonstrating the "1 FOR ALL" battery platform, showing a central battery powering various CAT 18V cordless tools such as drills, saws, and sanders.
