تعارف
The Streamlight TLR-9 Flex is a low-profile, rail-mounted tactical light designed for full-frame weapons. It features a powerful LED, ambidextrous rear switches, and a durable aluminum construction. This manual provides essential information for the safe and effective use of your TLR-9 Flex.
تصوير: سامهون واري زاويه view of the Streamlight TLR-9 Flex Tactical Light, showcasing its compact design and integrated rail mount.
سيٽ اپ ڪريو
1. بيٽري لڳائڻ
- Ensure the light is in the "Safe off" position by unscrewing the bezel until you feel it stop. This prevents accidental activation and conserves battery life.
- Insert two CR123A lithium batteries into the battery compartment, observing the correct polarity as indicated inside the light.
- Securely screw the bezel back into place.
نوٽ: Only use CR123A lithium batteries. Always dispose of used batteries responsibly.
2. Rail Mounting
The TLR-9 Flex features a rail clamp designed for rapid attachment and detachment from full-frame weapons. A key kit is included to ensure proper fitment on various rail types.
- Select the appropriate key from the included kit that matches your weapon's rail system.
- ريل کوليو clamp screw on the TLR-9 Flex.
- Align the light with the rail and slide it into position. Ensure the selected key engages with the rail slot.
- ريل کي سخت ڪريوamp screw firmly to secure the light. Do not overtighten.
Image: The Streamlight TLR-9 Flex Tactical Light securely mounted on the rail of a firearm, demonstrating its low-profile انضمام.
3. Switch Installation (High/Low Options)
The TLR-9 Flex comes with interchangeable high and low ambidextrous rear switches to customize the ergonomic feel based on your shooting style.
- Identify the currently installed switch type (High or Low).
- To change, carefully remove the existing switch by following the instructions provided in the detailed diagram (if available) or by gently prying it off.
- Align the desired High or Low switch with the contact points and press firmly until it clicks into place.
Image: The High Switch component, offering a more pronounced activation surface.
Image: The Low Switch component, providing a more recessed activation surface.
Image: The TLR-9 Flex with the High Switch installed, showing its extended profile.
Image: The TLR-9 Flex with the Low Switch installed, showing its more compact profile.
آپريٽنگ هدايتون
1. بنيادي آپريشن
The TLR-9 Flex features ambidextrous rear switches for momentary or constant-on operation.
- لمحي تي: Press and hold either rear switch. The light will remain on as long as the switch is held. Release to turn off.
- مسلسل جاري: Press and quickly release either rear switch. The light will remain on until the switch is pressed and released again.
2. Strobe Function
The TLR-9 Flex includes a user-enabled strobe function.
- To activate the strobe, rapidly press either rear switch twice (double-tap).
- To deactivate the strobe and return to constant-on mode, press and release either switch once.
The white LED produces 1,000 lumens with 10,000 candela, providing a 200-meter beam distance. Runtime is approximately 1.5 hours in constant-on mode and 3 hours in strobe mode.
سار سنڀال
1. بيٽري مٽائڻ
When the light output diminishes, it is time to replace the batteries. Follow the battery installation steps outlined in the Setup section.
2. صفائي
Regular cleaning will help maintain the performance and longevity of your TLR-9 Flex.
- روشني جي ٻاهرين حصي کي نرم، ڊي سان صاف ڪريوamp ڪپڙو.
- Clean the lens with a lens cleaning cloth or cotton swab to remove dirt and smudges. Avoid abrasive materials.
- Ensure the O-rings are free of debris and lightly lubricated to maintain water resistance.
3. اسٽوريج
When storing the TLR-9 Flex for extended periods, remove the batteries to prevent potential leakage and damage to the device.
مشڪلاتون
- روشني نه پئي هلي: Check battery polarity. Ensure batteries are fresh. Confirm the bezel is fully tightened (out of "Safe off" mode).
- مدھم روشني جي پيداوار: Replace batteries with fresh ones. Clean the lens.
- وقتي آپريشن: ريل cl کي يقيني بڻايوamp is securely tightened. Check battery contacts for corrosion.
If issues persist, contact Streamlight customer support.
وضاحتون
| خاصيت | تفصيل |
|---|---|
| ماڊل نمبر | 69464 |
| Light Output (White LED) | 1000 Lumens |
| ڪنڊيلا | 10,000 |
| بيم جو مفاصلو | 200 ميٽر |
| Runtime (Constant On) | 1.5 ڪلاڪ |
| رن ٽائم (اسٽروب) | 3 ڪلاڪ |
| طاقت جو ذريعو | 2 x CR123A Lithium Batteries (included) |
| مواد | 6000 Series Machined Aircraft Aluminum |
| ختم ڪر | ڪارو Anodized |
| طول و عرض (L x W x H) | 3.87" x 1.18" x 1.27" (9.82 سينٽي ميٽر x 2.98 سينٽي ميٽر x 3.22 سينٽي ميٽر) |
| شيءِ جو وزن | 4.3 آونس (121.9 گرام) |
| پاڻي جي مزاحمت جي سطح | پنروڪ |
| شامل اجزاء | Light, Key Kit, High Switch (Mounted), Low Switch, Batteries |
Image: A diagram illustrating the key dimensions and performance specifications of the Streamlight TLR-9 Flex Tactical Light.
وارنٽي ڄاڻ
The Streamlight TLR-9 Flex is covered by a محدود لائفائم وارنٽي. For specific terms and conditions, please refer to the official Streamlight warranty documentation or their webسائيٽ.
حمايت
For technical assistance, replacement parts, or warranty claims, please contact Streamlight customer service directly. Visit the official Streamlight webرابطي جي معلومات ۽ اضافي وسيلن لاءِ سائيٽ.