رولز RM169 پروفيشنل بلوٽوٿ آڊيو مکسر يوزر مينوئل

1. تعارف

خريد ڪرڻ لاءِ مهربانيasing the Rolls RM169 Professional Bluetooth Audio Mixer. This manual provides detailed instructions for the proper setup, operation, and maintenance of your new audio mixer. Please read this manual thoroughly before operating the unit to ensure optimal performance and longevity.

2. حفاظتي هدايتون

بجليءَ جي جھٽڪي، باهه، يا يونٽ کي نقصان پهچڻ جي خطري کي گهٽائڻ لاءِ، مھرباني ڪري ھيٺ ڏنل حفاظتي احتياطن تي عمل ڪريو:

• طاقت جو ذريعو: Connect the unit only to the specified power supply as indicated on the unit or in this manual.
• نمي: يونٽ کي مينهن يا نمي جي سامهون نه رکو. يونٽ تي مائع سان ڀريل شيون، جهڙوڪ گلدان، نه رکو.
• وينٽيليشن: مناسب هوا جي وهڪري کي يقيني بڻايو. هوا جي وهڪري جي سوراخن کي بند نه ڪريو.
• گرمي: يونٽ کي گرمي جي ذريعن جهڙوڪ ريڊيئيٽر، گرمي رجسٽر، اسٽو، يا ٻيو سامان (بشمول ampلائفائرز) جيڪي گرمي پيدا ڪن ٿا.
• صفائي: Clean only with a dry cloth. Disconnect the power before cleaning.
• خدمت ڪرڻ: هن يونٽ جي پاڻ خدمت ڪرڻ جي ڪوشش نه ڪريو. سڀني خدمتن کي قابل خدمت اهلڪارن جي حوالي ڪريو.
• ڪيبل: بجليءَ جي تار کي هلڻ يا پنچ ٿيڻ کان بچايو، خاص طور تي پلگ، سهولتن جي رسيپٽيڪل ۽ ان نقطي تي جتي اهي سامان مان نڪرندا آهن.

3. خاصيتون

The Rolls RM169 Professional Bluetooth Audio Mixer offers a range of features designed for versatile audio mixing:

• 6-channel Analog Audio Mixer
• Integrated Bluetooth Connectivity
• Dedicated Headphone Output
• ڪنسنسر مائڪروفونز لاءِ پريتم پاور
• Individual Level and Tone controls for inputs

4. ڪنٽرول ۽ ڪنيڪشن

4.1 فرنٽ پينل لي آئوٽ

The front panel of the RM169 provides access to all primary controls and input connections.

شڪل 1: سامهون view of the Rolls RM169 mixer. This image displays the input jacks for MIC ONE and MIC TWO, along with their respective LEVEL and TONE controls. Channels 1 through 4 also have LEVEL controls. The BASS and TREBLE equalization knobs are visible, as well as the HEADPHONE LEVEL and OUTPUT controls. On the right, the BLUETOOTH ID (ROLLSBT) and POWER indicator are shown, along with the RESET button.

• MIC ONE / MIC TWO (XLR/TRS Combo Jacks): Inputs for microphones or line-level sources.
• LEVEL (MIC ONE, MIC TWO, 1-4): Adjusts the input gain for each respective channel.
• TONE (MIC ONE, MIC TWO): Adjusts the tonal characteristics (brightness/darkness) of the microphone inputs.
• بيس / ٽربل: Global equalization controls for the main mix.
• هيڊ فون ليول: هيڊ فون آئوٽ جي مقدار کي ڪنٽرول ڪري ٿو.
• پيداوار: Master volume control for the main outputs.
• BLUETOOTH ID (ROLLSBT): Displays the Bluetooth pairing name.
• پاور اشارو: روشني ٿئي ٿي جڏهن يونٽ هلايو ويندو آهي.
• ٻيهر سيٽ ڪريو Button to reset Bluetooth connection.

4.2 ريئر پينل ڪنيڪشن

The rear panel houses the power input and main audio output connections.

شڪل 2: ريڙهه view of the Rolls RM169 mixer. This image shows the 15 VDC power input, the MAIN OUTPUTS (LEFT and RIGHT) available via XLR and RCA connectors. SOURCE INPUTS 1 through 4 are shown as RCA jacks. A MIC/FX INSERT jack is present, along with MICROPHONE 1 and 2 XLR inputs and a PHANTOM POWER switch.

• 15 VDC Power Input: شامل ڪريو پاور اڊاپٽر ھتي.
• MAIN OUTPUTS (XLR & RCA): Balanced XLR and unbalanced RCA outputs for connecting to an amplifier, powered speakers, or recording device.
• SOURCE INPUTS (1-4 RCA): Unbalanced RCA inputs for line-level devices such as CD players, media players, or other audio sources.
• MIC/FX INSERT: Allows for the insertion of external effects processors for the microphone channels.
• MICROPHONE 1 / MICROPHONE 2 (XLR): Dedicated XLR inputs for microphones.
• پريتم پاور سوئچ: XLR ان پٽن سان ڳنڍيل ڪنڊينسر مائڪروفونز لاءِ +48V فينٽم پاور چالو ڪري ٿو.

5. سيٽ اپ

Follow these steps to set up your RM169 mixer:

1. لڳائڻ: Place the RM169 on a stable, flat surface or mount it in a standard 19-inch rack using appropriate rack ears (not included). Ensure adequate ventilation around the unit.
2. پاور ڪنيڪشن: Connect the supplied 15V DC power adapter to the 15 VDC input on the rear panel of the RM169. Plug the adapter into a suitable AC power outlet. Do not power on the unit yet.
3. آئوٽ پٽ ڪنيڪشن: Connect the MAIN OUTPUTS (XLR or RCA) on the rear panel of the RM169 to the inputs of your amplifier, powered speakers, or recording device.
4. ان پٽ ڪنيڪشن:
   • For microphones, connect them to the MIC ONE/TWO combo jacks on the front or the dedicated XLR inputs on the rear. If using condenser microphones, ensure the PHANTOM POWER switch on the rear is set to ON.
   • For line-level devices (e.g., CD players, media players), connect them to the SOURCE INPUTS (1-4) on the rear panel using RCA cables.
5. هيڊفون: If desired, connect headphones to the HEADPHONE output on the front panel.
6. پاور آن: Once all connections are made, turn on the RM169. The POWER indicator on the front panel will illuminate.

6. آپريٽنگ هدايتون

This section details the basic operation of the RM169 mixer.

1. Adjusting Input Levels: For each connected source (microphones, line-level devices), slowly turn up the corresponding LEVEL knob (MIC ONE, MIC TWO, 1-4) until the desired volume is achieved. Monitor your output device to prevent clipping or distortion.
2. Tone Control (Microphones): Use the TONE knobs for MIC ONE and MIC TWO to adjust the brightness or warmth of the microphone signals. Turn clockwise for brighter sound, counter-clockwise for warmer sound.
3. Global Equalization: Use the BASS and TREBLE knobs to adjust the overall low and high frequencies of the main mix.
4. مکيه آئوٽ پُٽ ليول: The OUTPUT knob controls the master volume of the main XLR and RCA outputs. Adjust this to control the overall volume sent to your ampلائفائر يا طاقتور اسپيڪر.
5. هيڊ فون مانيٽرنگ: Use the HEADPHONE LEVEL knob to adjust the volume of your headphones independently of the main output.

6.1 بلوٽوٽ جوڙي

To connect a Bluetooth device to your RM169:

1. Ensure the RM169 is powered on.
2. On your Bluetooth-enabled device (e.g., smartphone, tablet), go to its Bluetooth settings and enable Bluetooth.
3. ڳولھيو available devices. The RM169 will appear as "ROLLSBT".
4. Select "ROLLSBT" to pair. Once paired, audio from your device will be routed through the RM169.
5. Adjust the level of the Bluetooth input using the corresponding channel level control (typically Channel 4, but refer to the front panel diagram for exact labeling).
6. If you experience connection issues, press the RESET button on the front panel to clear the Bluetooth connection and attempt pairing again.

7. سار سنڀال

Proper maintenance ensures the longevity of your RM169 mixer:

• صفائي: صفائي ڪرڻ کان اڳ بجلي جي تار کي ڌار ڪريو. يونٽ جي ٻاهرين حصي کي صاف ڪرڻ لاءِ نرم، سڪل ڪپڙو استعمال ڪريو. مائع ڪلينر يا ايروسول ڪلينر استعمال نه ڪريو.
• اسٽوريج: جڏهن گهڻي عرصي تائين استعمال ۾ نه هجي، ته يونٽ کي ٿڌي، سڪل جاءِ تي، سڌي سج جي روشني ۽ انتهائي گرمي پد کان پري رکو.
• وينٽيليشن: باقاعدي طور تي چيڪ ڪريو ته وينٽيليشن جا دروازا مٽي يا ملبي سان رڪاوٽ نه آهن.

8. مسئلا حل ڪرڻ

If you encounter issues with your RM169, refer to the following common problems and solutions:

• طاقت ناهي:
  • Ensure the power adapter is securely connected to both the unit and a working power outlet.
  • پڪ ڪريو ته پاور آئوٽليٽ فعال آهي.
• ڪوبه آواز آئوٽ:
  • Check that the RM169 is powered on and the POWER indicator is lit.
  • Ensure the OUTPUT level knob is turned up.
  • Verify that the LEVEL knobs for the active input channels are turned up.
  • Check all audio cables for secure connections and proper functionality.
  • پڪ ڪريو ته ڳنڍيل آهي amplifier or powered speakers are turned on and functioning correctly.
• بلوٽوت نه ڳنڍي رهيو آهي:
  • Ensure Bluetooth is enabled on your device and it is within range of the mixer.
  • Press the RESET button on the front panel of the RM169.
  • Forget or unpair "ROLLSBT" from your device's Bluetooth settings and attempt to pair again.
  • Ensure no other device is currently paired with the RM169.
• مسخ ٿيل آواز:
  • Reduce the input LEVEL for the affected channel.
  • Reduce the master OUTPUT level.
  • Check the input signal source for distortion.

9. وضاحتون

10. وارنٽي ۽ سپورٽ

Rolls Corporation warrants its products to the original consumer purchaser to be free from defects in materials and workmanship for a period of one year from the date of purchase. This warranty does not cover damage resulting from accident, misuse, abuse, improper operation, unauthorized modification, or neglect. For warranty service or technical support, please contact your authorized Rolls dealer or visit the official Rolls webرابطي جي معلومات لاء سائيٽ.

مھرباني ڪري وارنٽي دعوائن لاءِ خريد ڪرڻ جو پنھنجو ثبوت رکو.