1. تعارف
خريد ڪرڻ لاءِ مهربانيasing the Audiolab M-ONE Integrated Amplifier. The M-ONE is a compact yet powerful stereo integrated amplifier featuring an advanced DSD Digital-to-Analog Converter (DAC) and Bluetooth connectivity. It is designed to deliver high-fidelity audio performance from a variety of digital and analog sources, making it a versatile centerpiece for your audio system.
This manual provides essential information for the safe and optimal operation of your M-ONE unit. Please read it thoroughly before use and retain it for future reference.
2. حفاظت جي ڄاڻ
بجليءَ جي جھٽڪي، باهه، يا يونٽ کي نقصان کان بچڻ لاءِ مھرباني ڪري ھيٺ ڏنل حفاظتي احتياطي تدبيرن تي عمل ڪريو:
- طاقت جو ذريعو: Connect the unit only to an AC power source of the type indicated on the rear panel. Ensure the voltage توهان جي علائقي لاءِ صحيح آهي.
- وينٽيليشن: Ensure adequate ventilation. Do not block ventilation openings or place the unit on soft surfaces that may impede airflow. Maintain a minimum distance of 10cm (4 inches) around the unit for proper heat dissipation.
- پاڻي ۽ نمي: يونٽ کي مينهن، نمي، ٽِپڻ، يا ڇِپڻ جي سامهون نه رکو. يونٽ تي مائع سان ڀريل شيون، جهڙوڪ گلدان، نه رکو.
- گرمي: يونٽ کي گرمي جي ذريعن جهڙوڪ ريڊيئيٽر، گرمي رجسٽر، اسٽو، يا ٻيو سامان (بشمول ampلائفائرز) جيڪي گرمي پيدا ڪن ٿا.
- پرڏيهي شيون: Do not insert any objects into the unit's openings. If a foreign object enters the unit, disconnect the power cable immediately and contact qualified service personnel.
- خدمت ڪرڻ: ھن پراڊڪٽ کي پنھنجي خدمت ڪرڻ جي ڪوشش نه ڪريو. س servني خدمتن جو حوالو ڏيو قابل سروس اهلڪارن کي.
- صفائي: Unplug the unit from the wall outlet before cleaning. Use a soft, dry cloth only. Do not use liquid or aerosol cleaners.
3. پيڪيج مواد
Carefully unpack the unit. The carton should contain:
- Audiolab M-ONE Integrated Ampزندگي گذاريندڙ
- اي سي پاور ڪيبل
- ريموٽ ڪنٽرول
- USB ڪيبل
- استعمال ڪندڙ جو دستياب (ھي دستاويز)
جيڪڏهن ڪا به شيء غائب يا خراب آهي، مهرباني ڪري فوري طور تي پنهنجي ڊيلر سان رابطو ڪريو.
4. پراڊڪٽ ختمview
4.1 فرنٽ پينل
شڪل 4.1: سامهون view of the Audiolab M-ONE, showing the OLED display, two rotary controls, headphone jack, and power button.
- هيڊ فون آئوٽ: ڳنڍڻ هيڊ فونز لاءِ 6.3mm جيڪ.
- SEL (Selector) Knob: Rotates to select input sources. Press to confirm selection or enter menu.
- OLED ڊسپلي: Shows current input, volume level, and menu information.
- VOL (حجم) نوب: Rotates to adjust volume level. Press to mute/unmute.
- پاور بٽڻ: Press to turn the unit on or off (standby mode).
- M-ONE Indicator: LED light indicating power status.
4.2 ريئر پينل
شڪل 4.2: پوئتي view of the Audiolab M-ONE, displaying various input and output terminals, including power, speaker outputs, digital inputs (Coaxial, Optical, USB), and analog inputs (AUX).
- پاور سوئچ: مين پاور آن/آف سوئچ.
- اي سي پاور انليٽ: Connects to the supplied AC power cable.
- اسپيڪر ٽرمينل: Connect your passive loudspeakers here. Ensure correct polarity (+ to + and - to -).
- ڊجيٽل انپٽ:
- محوري: Digital coaxial input.
- اختياري: Digital optical (Toslink) input.
- USB B: USB Type B input for connecting to a computer.
- Analog Inputs (AUX): RCA stereo inputs for analog sources.
- 12V ٽرگر: For synchronized power control with other compatible components.
5. سيٽ اپ
5.1 لڳائڻ
Place the M-ONE on a stable, level surface away from direct sunlight, heat sources, and excessive moisture. Ensure there is sufficient space around the unit for proper ventilation, especially above the top panel.
5.2 اسپيڪر ڪنيڪشن
Connect your passive loudspeakers to the speaker terminals on the rear panel. Ensure that the positive (+) terminal of the M-ONE is connected to the positive (+) terminal of your speaker, and the negative (-) terminal of the M-ONE is connected to the negative (-) terminal of your speaker. Use high-quality speaker cables for optimal performance.
احتياط:
- Ensure the M-ONE is powered off before making any speaker connections.
- Do not short-circuit the speaker terminals.
5.3 Source Connection
Connect your audio sources to the appropriate inputs on the rear panel:
- Digital Sources (CD Player, Streamer, TV): Use coaxial, optical, or USB cables to connect to the respective digital inputs. For computer connection, use the USB B input.
- Analog Sources (Turntable with Phono Preamp, Tape Deck): Use RCA cables to connect to the AUX inputs.
5.4 پاور ڪنيڪشن
Once all audio connections are made, connect the supplied AC power cable to the AC power inlet on the rear panel of the M-ONE and then to a suitable wall outlet.
6. آپريٽنگ هدايتون
6.1 پاور آن/آف
First, ensure the main power switch on the rear panel is in the 'ON' position. Then, press the Power Button on the front panel to switch the M-ONE from standby to operational mode. Press it again to return to standby.
6.2 ان پٽ چونڊ
گھمايو SEL knob on the front panel to cycle through the available input sources (e.g., COAX, OPT, USB, AUX, BT). The selected input will be displayed on the OLED screen. Press the SEL توهان جي چونڊ جي تصديق ڪرڻ لاء knob.
6.3 حجم ڪنٽرول
گھمايو وول knob on the front panel clockwise to increase the volume and counter-clockwise to decrease it. The current volume level will be shown on the OLED display. Press the وول knob to mute or unmute the audio output.
6.4 بلوٽوٽ جوڙي
بلوٽوت ڊوائيس کي ڳنڍڻ لاء:
- Select the 'BT' input using the SEL knob. The display will show "BT Pairing".
- پنهنجي موبائل ڊوائس (اسمارٽ فون، ٽيبليٽ، وغيره) تي، بلوٽوٿ کي فعال ڪريو ۽ موجود ڊوائيسز جي ڳولا ڪريو.
- Select "Audiolab M-ONE" from the list of devices.
- Once paired, the display will indicate a successful connection, and you can now stream audio wirelessly to the M-ONE.
6.5 DAC Functionality
The M-ONE features a high-performance DSD DAC. When a digital input (COAX, OPT, USB) is selected, the M-ONE will automatically process the digital audio signal. For USB connection to a computer, you may need to install specific drivers, which can typically be found on the Audiolab website. Refer to your computer's audio settings to select the M-ONE as the output device.
6.6 هيڊ فون آئوٽ
Connect your headphones to the 6.3mm headphone jack on the front panel. When headphones are connected, the loudspeaker output will automatically be muted.
6.7 مينيو نيويگيشن ۽ سيٽنگون
The M-ONE offers various settings accessible via the OLED display and rotary controls. Press and hold the SEL knob to enter the main menu. Use the SEL knob to navigate through options and the وول knob to change values. Press SEL to confirm or exit a submenu. Available settings may include:
- ڊجيٽل فلٽر: Select different digital filter characteristics for the DAC.
- روشني ڏيکاري: OLED ڊسپلي جي چمڪ کي ترتيب ڏيو.
- Standby Timer: Set a timer for automatic standby.
- Volume on Power On: Configure the initial volume level when the unit powers on.
7. سار سنڀال
To ensure the longevity and optimal performance of your Audiolab M-ONE, follow these maintenance guidelines:
- صفائي: Use a soft, dry, lint-free cloth to clean the exterior surfaces. Do not use abrasive cleaners, waxes, or solvents, as these can damage the finish.
- وينٽيليشن: Periodically check that the ventilation slots are clear of dust and debris. Use a soft brush or a vacuum cleaner with a brush attachment to gently remove any accumulation.
- ڪنيڪشن: Ensure all cables are securely connected. Loose connections can lead to poor audio quality or intermittent issues.
- اسٽوريج: If storing the unit for an extended period, disconnect it from the power supply and store it in a cool, dry place, preferably in its original packaging.
8. مسئلا حل ڪرڻ
If you experience issues with your M-ONE, consult the following table before contacting service personnel:
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| طاقت نه آهي | Power cable not connected; Rear power switch off; Unit in standby. | Check power cable connection; Ensure rear power switch is ON; Press front panel power button. |
| .الهائيندڙن مان آواز ڪونهي | Incorrect input selected; Volume too low; Speakers not connected; Mute activated; Headphones connected. | Select correct input; Increase volume; Check speaker connections; Press VOL knob to unmute; Disconnect headphones. |
| هيڊ فونز مان ڪوبه آواز ناهي | Headphones not fully inserted; Volume too low; Mute activated. | Ensure headphones are fully inserted; Increase volume; Press VOL knob to unmute. |
| بلوٽوٿ جوڙو ناهي | M-ONE not in pairing mode; Device too far; Interference. | Select BT input; Ensure M-ONE is discoverable; Move device closer; Reduce interference. |
| بگڙيل آواز | Source signal too high; Speaker impedance mismatch; Damaged cables. | Reduce source volume; Check speaker impedance compatibility; Inspect and replace cables if necessary. |
9. وضاحتون
The following specifications are typical for the Audiolab M-ONE:
- ٻاھر نڪرڻ جي طاقت: 80 watts per channel (into 8 ohms)
- ڊجيٽل انپٽ: Coaxial, Optical, USB Type B
- اينالاگ انپٽس: آر سي اي (AUX)
- وائرلیس رابطي بلوٽوٿ
- DAC: DSD compatible
- طول و عرض (L x W x H): 13.7 x 11.5 x 4.4 انچ (34.8 x 29.2 x 11.2 سينٽي)
- وزن: 16.58 پائونڊ (7.52 ڪلوگرام)
- جلدtage: 12 Volts (Internal power supply handles AC100-115V/50-60Hz)
- ٺاهيندڙ: آڊيو ليب
- ماڊل نمبر: M-ONE
نوٽ: وضاحت بغير اطلاع جي تبديلي سان ٿي سگھي ٿي.
10. وارنٽي ۽ سپورٽ
Audiolab products are manufactured to the highest standards and are designed for reliable performance. This product is covered by a limited warranty, the terms of which may vary by region. Please refer to the warranty card included with your product or contact your local Audiolab dealer or distributor for specific warranty details.
For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact your authorized Audiolab dealer or visit the official Audiolab webرابطي جي معلومات لاء سائيٽ.
Webسائيٽ: www.audiolab.co.uk
