تعارف
خريد ڪرڻ لاءِ مهربانيasing the Audiolab 6000A Stereo Integrated Amplifier. This manual provides essential information for setting up, operating, and maintaining your amplifier to ensure optimal performance and longevity. The Audiolab 6000A is a versatile 100-watt integrated amplifier with built-in Bluetooth connectivity and an ESS 9018K2M DAC, offering a high-quality audio experience.
حفاظت جي ڄاڻ
- بجلي جي فراهمي: کي يقيني بڻايو amplifier is connected to a power supply that matches the voltagاي يونٽ تي بيان ڪيو ويو آهي.
- وينٽيليشن: وينٽيليشن جي سوراخن کي نه روڪيو. يونٽ جي چوڌاري مناسب جاءِ ڏيو ته جيئن وڌيڪ گرم ٿيڻ کان بچي سگهجي.
- نمي: Keep the unit away from water, moisture, and high humidity.
- صفائي: Disconnect from power before cleaning. Use a soft, dry cloth. Do not use liquid or aerosol cleaners.
- خدمت ڪرڻ: Refer all servicing to qualified service personnel. Do not attempt to open or repair the unit yourself.
- لڳائڻ: يونٽ کي هڪ مستحڪم، هموار مٿاڇري تي رکو. ان کي گرمي جي ذريعن جي ويجهو يا سڌي سج جي روشني ۾ رکڻ کان پاسو ڪريو.
دٻي ۾ ڇا آهي
پيڪنگ ڪرڻ وقت، مھرباني ڪري تصديق ڪريو ته ھيٺ ڏنل سڀ شيون موجود آھن:
- Audiolab 6000A 100-watt Stereo Integrated Amp/Bluetooth DAC - Silver
- پاور ڪيبل
- استعمال ڪندڙ جو دستياب (ھي دستاويز)
پيداوار ختمview
سامهون پينل
شڪل 1: سامهون view of the Audiolab 6000A integrated amplifier, showing the display, control knobs for selection, mode, and volume, and power button.
- SEL (Selection) Knob: Used to navigate menus and select inputs.
- موڊ نوب: Used to switch between different operating modes.
- ڊسپلي اسڪرين: Shows current input, volume level, and operational status.
- VOL (حجم) نوب: آئوٽ پٽ حجم کي ترتيب ڏئي ٿو.
- هيڊ فون آئوٽ: ڳنڍڻ هيڊ فونز لاءِ 6.35mm جيڪ.
- IR وصول ڪندڙ: ريموٽ ڪنٽرول سگنلن لاءِ.
- پاور بٽڻ: Turns the unit on/off or puts it into standby.
پوئتي پينل
شڪل 2: پوئتي view of the Audiolab 6000A integrated amplifier, showing various input and output terminals, power inlet, and antenna.
- Power Inlet & Fuse: Connects to AC power. Includes a fuse holder.
- پاور سوئچ: Main power toggle.
- اسپيڪر جا نتيجا: Binding posts for connecting left and right speakers.
- ڊجيٽل ان پٽ (آپٽيڪل/ڪو ايڪسيل): For connecting digital audio sources.
- USB ان پٽ For firmware updates (not for audio playback).
- بلوٽوت انٽينا: وائرليس بلوٽوٿ ڪنيڪشن لاءِ.
- Analog Inputs (AUX1, AUX2, AUX3): RCA inputs for analog audio sources.
- فونو ان پٽ: Dedicated RCA input for turntables (MM).
- پري آئوٽ: RCA outputs for connecting to an external power ampوierيڪ زنده
سيٽ اپ ڪريو
1. رکڻ
Place the Audiolab 6000A on a flat, stable surface, ensuring adequate ventilation around the unit. Avoid direct sunlight, heat sources, and areas with high humidity.
2. اسپيڪرز کي ڳنڍڻ
Connect your passive speakers to the speaker output terminals on the rear panel. Ensure correct polarity (+ to + and - to -) for both left and right channels. Use high-quality speaker cables for optimal sound.
3. آڊيو ذريعن کي ڳنڍڻ
- Analog Sources: Connect CD players, tuners, or other analog devices to the AUX1, AUX2, or AUX3 RCA inputs.
- ٽرنبل ٽيبل Connect a turntable with a Moving Magnet (MM) cartridge to the PHONO input.
- Digital Sources: Connect digital audio sources like TVs, game consoles, or media streamers to the OPT1, OPT2 (Optical) or COAX1, COAX2 (Coaxial) inputs.
4. پاور ڪنيڪشن
Once all audio connections are made, connect the supplied power cable to the AC inlet on the rear panel and then to a suitable wall outlet. Ensure the main power switch on the rear panel is in the OFF position before connecting.
آپريٽنگ
1. پاور آن/آف
First, ensure the main power switch on the rear panel is in the ON position. Then, press the front panel Power button to turn the unit on or put it into standby mode.
2. انٽ چونڊ
گھمايو SEL knob on the front panel to cycle through available input sources (e.g., AUX1, OPT1, Bluetooth, Phono). The selected input will be displayed on the screen.
3. حجم ڪنٽرول
گھمايو وول knob clockwise to increase volume and counter-clockwise to decrease volume. The current volume level will be shown on the display.
4. آپريٽنگ موڊس
The Audiolab 6000A features three distinct operating modes, selectable via the موڊ ڇڪ:
- Integrated Mode: معياري amplifier operation, where the pre-ampلفٽ ۽ طاقت amplifier sections work together.
- Pre-Power Mode: پهرين-amplifier section is bypassed, allowing the 6000A to function purely as a power amplifier. Useful when connecting an external pre-ampوierيڪ زنده
- اڳ-Ampلائفائر موڊ: طاقت amplifier section is bypassed, allowing the 6000A to function purely as a pre-amplifier. Useful when connecting an external power amplifier via the Pre-Out terminals.
5. بلوٽوٽ جوئر
بلوٽوٿ ڊوائيس جوڙڻ لاءِ:
- Select the Bluetooth input using the SEL ڇڪ
- The display will show "PAIRING" or similar, indicating it's ready to connect.
- On your mobile device, enable Bluetooth and search for "Audiolab 6000A".
- منتخب ڪريو amplifier from the list to complete pairing. Once connected, the display will confirm.
6. DAC Functionality
The Audiolab 6000A incorporates an ESS 9018K2M DAC, allowing for high-resolution digital audio playback. Connect your digital sources (e.g., CD transport, network streamer) to the optical or coaxial digital inputs to utilize the internal DAC.
سار سنڀال
- صفائي: Use a soft, dry, lint-free cloth to clean the exterior of the amplifier. Do not use abrasive cleaners, waxes, or solvents.
- وينٽيليشن: Periodically check that the ventilation slots are clear of dust and debris.
- اسٽوريج: جيڪڏهن يونٽ کي گهڻي عرصي تائين ذخيرو ڪري رهيا آهيو، ته ان کي بجلي کان ڌار ڪريو ۽ ان کي ٿڌي، سڪل جاءِ تي ذخيرو ڪريو.
مشڪلاتون
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| طاقت نه آهي | Power cable not connected; Rear power switch off; Blown fuse | Check power cable connection; Ensure rear power switch is ON; Replace fuse (refer to safety info) |
| آواز ڪونهي | Incorrect input selected; Speaker cables loose/incorrectly connected; Volume too low; Mute engaged | Select correct input; Check speaker connections and polarity; Increase volume; Check if mute is active |
| بلوٽوٿ جوڙو ناهي | Amplifier not in pairing mode; Device too far; Interference | Ensure Bluetooth input is selected; Move device closer; Reduce interference from other wireless devices |
| بگڙيل آواز | Source signal too high; Speaker impedance mismatch; Damaged cables | Reduce source volume; Ensure speakers match amplifier impedance; Check/replace cables |
وضاحتون
- ماڊل: Audiolab 6000A
- ٻاھر نڪرڻ جي طاقت: 50W x 2 into 8 Ohms
- DAC: ESS 9018K2M
- رابطي: بلوٽوت فعال
- آپريٽنگ موڊس: Integrated, Pre-Power, Pre-Ampزندگي گذاريندڙ
- پيداوار جي ماپ: 13 x 17.5 x 3.15 انچ
- وزن: 21.6 پائونڊ
- جلدtage: 100 وولٽ
- گھٽ ۾ گھٽ سپلائي حجمtage: 15 وولٽ (DC)
وارنٽي ۽ سپورٽ
For warranty information and technical support, please refer to the warranty card included with your product or visit the official Audiolab webسائيٽ. ڪنهن به وارنٽي دعوائن لاءِ خريداري جو ثبوت رکو.
ٺاهيندڙ: آڊيو ليب
