Hikvision DS-7732NI-K4/16P 32-چينل PoE نيٽ ورڪ وڊيو رڪارڊر يوزر مينوئل

1. تعارف

This manual provides detailed instructions for the installation, operation, and maintenance of your Hikvision DS-7732NI-K4/16P 32-Channel PoE Network Video Recorder (NVR). This NVR supports up to 32 channels, with 16 Power over Ethernet (PoE) ports, 4K (8-Megapixel) resolution recording, USB backup, and ONVIF compatibility. Please read this manual thoroughly before use to ensure proper functionality and safety.

2. حفاظت جي ڄاڻ

• Ensure the NVR is placed on a stable, level surface to prevent accidental falls.
• ڊوائيس کي پاڻي يا نمي کي ظاهر نه ڪريو.
• صرف ڊوائيس سان فراهم ڪيل پاور اڊاپٽر استعمال ڪريو.
• اوور گرم ٿيڻ کان بچڻ لاءِ وينٽيليشن جي سوراخن کي روڪڻ کان پاسو ڪريو.
• سڀني خدمتن کي قابل عملدارن ڏانهن رجوع ڪريو.

3. پيڪيج مواد

پڪ ڪريو ته سڀئي شيون پيڪيج ۾ موجود آهن:

• Hikvision DS-7732NI-K4/16P NVR Unit
• پاور اڊاپٽر ۽ پاور ڪنڊ
• USB ماؤس
• HDMI ڪيبل
• Ethernet ڪيبل
• ريموٽ ڪنٽرولر
• Quick Start Guide / Instruction Manual
• HDD Mounting Screws (if applicable)

4. سيٽ اپ

4.1 جسماني رابطا

1. مانيٽر ڳنڍيو: HDMI يا VGA پورٽ استعمال ڪندي مانيٽر کي NVR سان ڳنڍيو.
2. ماؤس ڳنڍيو: Plug the USB mouse into one of the USB ports on the NVR.
3. نيٽ ورڪ ڪنيڪشن: Connect the NVR to your network router using an Ethernet cable.
4. ڪئميرا ڪنيڪشن: Connect your PoE IP cameras to the available PoE ports on the NVR. For third-party cameras, ensure they are ONVIF compatible.
5. پاور آن: Connect the power adapter to the NVR and then plug it into a power outlet. The NVR will power on automatically.

تصوير 1: سامهون view of the Hikvision DS-7732NI-K4/16P NVR unit, showing the power button, status indicators, and USB ports.

4.2 Initial Configuration (Adding a Third-Party Camera)

1. Ensure the camera is physically connected to the NVR via an Ethernet cable and the connection is secure.
2. On the NVR's display screen, once an image is shown, click the "Add Camera" icon (small circle with a plus sign) on the bottom bar.
3. In the Protocol section at the top left, select "ONVIF."
4. Click "Search." Once the connected device appears on the screen, select it and click "Add all."
5. After completing the setup, click "Go back." You should now see the newly added camera's live feed on the display.

5. آپريٽنگ هدايتون

5.1 رڪارڊنگ

The NVR automatically records footage from connected cameras to the installed hard drive. It supports 4K (8-Megapixel) resolution for high-quality video capture. Ensure a compatible hard drive (up to 24TB) is installed for continuous recording.

5.2 پلے بیک

رسائي رڪارڊ ٿيل footage through the NVR's user interface. Use the mouse to navigate the timeline and select specific dates and times for playback. The system allows for fast-forward, rewind, and frame-by-frame review.

5.3 USB Backup

To back up important footage, insert a USB storage device into one of the NVR's USB ports. Navigate to the backup menu in the system settings, select the desired footage, and initiate the backup process. Ensure the USB device has sufficient storage capacity.

5.4 ONVIF Compatibility

The NVR is compatible with ONVIF (Open Network Video Interface Forum) standard cameras, allowing for integration with a wide range of third-party IP cameras. This ensures flexibility in expanding your surveillance system.

6. سار سنڀال

• بهترين ڪارڪردگي ۽ سيڪيورٽي کي يقيني بڻائڻ لاءِ باقاعدي طور تي فرم ويئر اپڊيٽس جي جانچ ڪريو.
• Keep the NVR and cameras clean, free from dust and debris.
• Ensure adequate ventilation around the NVR to prevent overheating.
• وقتي طور تي ٻيهرview رڪارڊ ٿيل footage and system logs for any anomalies.

7. مسئلا حل ڪرڻ

7.1 No Video Signal from Camera

• Check all cable connections (Ethernet, power) to the camera and NVR.
• Verify the camera is powered on and its status indicator is active.
• Ensure the camera's IP address and network settings are correctly configured and compatible with the NVR.
• If it's a third-party camera, confirm ONVIF compatibility and proper integration steps (refer to Section 4.2).

7.2 NVR Not Recording

• Check if a hard drive is installed and properly recognized by the NVR.
• Verify recording schedules and settings in the NVR's configuration menu.
• پڪ ڪريو ته هارڊ ڊرائيو ۾ ڪافي خالي جاءِ آهي.

8. وضاحتون

9. وارنٽي ۽ سپورٽ

This Hikvision product comes with a two-year warranty against factory defects. For technical support or warranty claims, please contact your authorized Hikvision dealer or visit the official Hikvision support webسائيٽ.