JBL Professional AM5212/66 Loudspeaker System User Manual

1. تعارف

This manual provides essential information for the proper setup, operation, and maintenance of your JBL Professional AM5212/66 Medium Power 2-Way Loudspeaker System. Please read this manual thoroughly before using the product to ensure optimal performance and safety.

2. حفاظت جي ڄاڻ

اھم حفاظتي ھدايتون:

• اهي هدايتون پڙهو.
• اهي هدايتون رکو.
• سڀني ڊيڄاريندڙن تي ڌيان ڏيو.
• سڀني هدايتن تي عمل ڪريو.
• پاڻي جي ويجهو هي اوزار استعمال نه ڪريو.
• صرف سڪل ڪپڙي سان صاف ڪريو.
• ڪنهن به وائنٽيليشن جي افتتاح کي بلاڪ نه ڪريو. ٺاهيندڙ جي هدايتن جي مطابق انسٽال ڪريو.
• ڪنهن به گرمي جي ذريعن جي ويجهو نصب نه ڪريو جهڙوڪ ريڊيٽرز، گرمي رجسٽر، اسٽو، يا ٻيو سامان (بشمول ampلائفائرز) جيڪي گرمي پيدا ڪن ٿا.
• صرف ٺاھيندڙ طرفان بيان ڪيل منسلڪ / لوازمات استعمال ڪريو.
• سڀني خدمتن جو حوالو ڏيو قابل خدمت اهلڪارن ڏانهن. خدمت ڪرڻ جي ضرورت پوندي آهي جڏهن سامان ڪنهن به طريقي سان خراب ٿي ويو آهي، جهڙوڪ پاور سپلائي ڪنڊ يا پلگ خراب ٿي ويو آهي، مائع ڦوڪيو ويو آهي يا شيون اپريٽس ۾ گر ٿي ويا آهن، سامان مينهن يا نمي جي سامهون آيو آهي، عام طور تي ڪم نٿو ڪري. ، يا ڇڏيو ويو آهي.

خبردار: ھن پراڊڪٽ ۾ ڪيميڪل شامل آھن جيڪي ڪيليفورنيا جي رياست کي سڃاتل آھن جيڪي ڪينسر ۽ پيدائشي نقص يا ٻي پيدائشي نقصان جو سبب بڻجن ٿا. وڌيڪ معلومات لاء، دورو ڪريو www.P65 ورننگس .ca.gov.

3. پيڪيج مواد

Your JBL Professional AM5212/66 Loudspeaker System package should contain:

• 1 x JBL Professional AM5212/66 Loudspeaker System
• هي صارف دستياب

4. پراڊڪٽ ختمview

The JBL Professional AM5212/66 is a medium power, 2-way, full-range loudspeaker system designed for professional audio applications. It features a 12-inch low-frequency driver and a high-frequency compression driver with a rotatable waveguide.

شڪل 4.1: سامهون view of the AM5212/66 Loudspeaker System with grille.

شڪل 4.2: سامهون view of the AM5212/66 with grille removed, revealing the 12-inch LF driver and the high-frequency waveguide.

اهم اجزاء:

• 262H-1 Differential Drive Low-Frequency Driver: A 300 mm (12 inch) driver designed for powerful and clear bass reproduction.
• 2408H-1 High-Frequency Compression Driver: A 38 mm (1.5 inch) exit, 38 mm (1.5 inch) voice-coil compression driver for crisp and detailed high frequencies.
• پي ٽي پروگريسيو ٽرانزيشن ويو گائيڊ: Provides a 60° x 60° coverage pattern, ensuring consistent sound dispersion. This waveguide is rotatable for flexible installation.

5. سيٽ اپ ۽ تنصيب

5.1 جسماني جڳهه

Position the loudspeaker in a location that allows for optimal sound dispersion and coverage. Consider the room acoustics and the intended listening area. The AM5212/66 can be used in either vertical or horizontal orientation.

5.2 Waveguide Rotation

The PT Progressive Transition waveguide can be rotated to maintain the desired 60° x 60° coverage pattern when the loudspeaker is installed horizontally. Consult a qualified technician for instructions on safely rotating the waveguide to avoid damage to the components.

5.3 ڪنيڪشن

The rear panel of the AM5212/66 features input terminals for connecting to an amplifier. Ensure all connections are secure and correctly polarized.

Figure 5.1: Close-up of the input panel, showing wiring options.

The input panel provides options for both passive and bi-amplified operation:

• غير فعال موڊ: پنهنجو ڳنڍيو amplifier to the terminals labeled for full-range input. The internal crossover network will distribute frequencies to the LF and HF drivers.
• بي-Amp موڊ: For advanced setups, separate amplifier channels can be used for the LF and HF drivers. Ensure an external crossover is used to properly divide the audio signal before amplification. Refer to the wiring diagram on the input panel for correct connections.

Always power off your amplifier before making or changing any connections to prevent damage to your equipment.

6. آپريشن

The AM5212/66 is a passive loudspeaker and requires an external ampآپريشن لاءِ لائفائر. پڪ ڪريو ته توهان جو amplifier is appropriately matched to the loudspeaker's power handling capabilities.

6.1 پاور آن/آف

Always power on your amplifier after all connections are made and power off the amplifier before disconnecting any cables. Start with the ampلائفائر جي مقدار کي ان جي گھٽ ۾ گھٽ سيٽنگ تي رکو ۽ بتدريج ان کي گهربل ٻڌڻ جي سطح تائين وڌايو.

6.2 آڊيو ان پٽ

پنهنجو آڊيو ذريعو ڳنڍيو (مڪسر، پريamplifier, etc.) to your amplifier, and then connect the amplifier output to the loudspeaker's input terminals as described in Section 5.3.

7. سار سنڀال

Proper maintenance ensures the longevity and performance of your loudspeaker system.

7.1 صفائي

• Use a soft, dry cloth to clean the exterior surfaces of the loudspeaker.
• گھڙڻ وارا صاف ڪندڙ، محلول، يا سخت ڪيميڪل استعمال نه ڪريو، ڇاڪاڻ ته اهي ختم کي نقصان پهچائي سگهن ٿا.
• Avoid spraying liquids directly onto the speaker grille or drivers.

7.2 اسٽوريج

If storing the loudspeaker for an extended period, keep it in a cool, dry environment, away from direct sunlight and extreme temperatures. It is recommended to store it in its original packaging or a protective case to prevent dust and physical damage.

8. مسئلا حل ڪرڻ

If you experience issues with your AM5212/66 loudspeaker, refer to the following common troubleshooting steps:

9. وضاحتون

Detailed technical specifications for the JBL Professional AM5212/66 Loudspeaker System:

10. وارنٽي ڄاڻ

JBL Professional products are designed and manufactured to the highest quality standards. This product is covered by a limited manufacturer's warranty. For specific warranty terms, conditions, and registration information, please refer to the warranty card included with your product or visit the official JBL Professional webسائيٽ. وارنٽي دعوائن لاءِ خريداري جو ثبوت رکو.

11. ڪسٽمر سپورٽ

ٽيڪنيڪل مدد، خدمت، يا اضافي پراڊڪٽ جي معلومات لاءِ، مھرباني ڪري JBL پروفيشنل ڪسٽمر سپورٽ سان رابطو ڪريو يا انھن جي سرڪاري آفيس جو دورو ڪريو. webسائيٽ:

• جي بي ايل پروفيشنل Webسائيٽ: www.jblpro.com
• Amazon تي JBL اسٽور: JBL اسٽور جو دورو ڪريو