Streamlight 88066 ProTac Rail Mount HL-X

Streamlight 88066 ProTac Rail Mount HL-X 1000-Lumen Multi-Fuel Weapon Light Instruction Manual

Model: 88066 ProTac Rail Mount HL-X | Brand: Streamlight

1. تعارف

The Streamlight 88066 ProTac Rail Mount HL-X is a high-lumen, multi-fuel weapon-mounted light designed for rapid and secure attachment to MIL-STD-1913 rails on rifles, carbines, and submachine guns. This manual provides essential information for the proper setup, operation, and maintenance of your device.

This light offers versatile operation with either a remote pressure switch or a standard push-button tail switch. It supports dual-fuel technology, allowing operation with two CR123A lithium batteries or one Streamlight rechargeable SL-B26 battery.

2. دٻي ۾ ڇا آهي

Upon opening your package, verify that all the following components are included:

  • Streamlight 88066 ProTac Rail Mount HL-X Weapon Light
  • ريموٽ پريشر سوئچ
  • Standard Push-Button Tail Switch
  • Remote Retaining Clips & Mounting Hardware
  • Two CR123A Batteries
  • استعمال ڪندڙ ھدايت
Contents of the Streamlight 88066 ProTac Rail Mount HL-X package, including the weapon light, remote switch, tail switch, mounting hardware, and batteries.

شڪل 1: All components included with the Streamlight 88066 ProTac Rail Mount HL-X.

3. سيٽ اپ

3.1. بيٽري لڳائڻ

The ProTac Rail Mount HL-X operates on either two CR123A lithium batteries or one Streamlight rechargeable SL-B26 battery. Ensure correct polarity when inserting batteries.

  1. Unscrew the tail cap from the main body of the light.
  2. Insert two CR123A batteries (positive end first) or one SL-B26 battery into the battery compartment.
  3. Replace the tail cap, ensuring it is tightened securely to maintain water resistance.
بند ڪرڻ view of the Streamlight 88066 ProTac Rail Mount HL-X with the tail cap removed, showing the battery compartment and two CR123A batteries.

شڪل 2: Battery installation for the ProTac Rail Mount HL-X.

3.2. روشني لڳائڻ

The integrated rail clamp allows for easy attachment to MIL-STD-1913 rails without requiring additional tools. The light comes with various keys to ensure compatibility with different rail systems.

  1. Loosen the thumbscrew on the rail clamp.
  2. روشني جي ريل ڪل کي ترتيب ڏيوamp with the desired slot on your MIL-STD-1913 rail.
  3. Push the light onto the rail until it seats firmly.
  4. Tighten the thumbscrew by hand until secure. For extra security, a flat-head wrench can be used with the provided groove.
The Streamlight 88066 ProTac Rail Mount HL-X attached to a firearm rail, viewed from the side, highlighting its compact design.

شڪل 3: ProTac Rail Mount HL-X mounted on a rail.

3.3. Attaching the Remote Pressure Switch

The remote pressure switch provides momentary and constant-on operation. Use the included retaining clips and mounting hardware to secure the switch and cable to your rail system.

  1. Replace the standard tail cap with the remote switch tail cap.
  2. Position the remote pressure switch on your rail in a comfortable and accessible location.
  3. Use the provided clips and screws to secure the pressure switch and route the cable along the rail, ensuring it does not interfere with weapon operation.
The Streamlight 88066 ProTac Rail Mount HL-X with the remote pressure switch attached and cable routed along the rail.

شڪل 4: Remote pressure switch installation.

4. آپريٽنگ هدايتون

4.1. TEN-TAP Programming

The ProTac Rail Mount HL-X features TEN-TAP Programming, allowing you to select from three user-selectable programs:

  • Program 1 (Factory Default): High / Strobe
  • پروگرام 2: High Only
  • پروگرام 3: گھٽ / اعلي

To change programs:

  1. Ensure the light is in the 'off' position.
  2. Tap the switch rapidly 9 times (within 0.4 seconds per tap).
  3. On the 10th tap, hold the switch down. The light will cycle through the available programs.
  4. Release the switch when the desired program is active. The light will flash to confirm the new program.

4.2. Switch Operation (Tail Switch & Remote Switch)

Both the standard push-button tail switch and the remote pressure switch offer similar functionality based on the selected TEN-TAP program.

  • لمحي تي: Press and hold the switch. Release to turn off.
  • مسلسل جاري: Press the switch fully and release quickly. Press again to turn off.
  • اسٽروب: Double-tap the switch quickly (if in Program 1).
The Streamlight 88066 ProTac Rail Mount HL-X emitting a bright beam of light, demonstrating its high lumen output.

شڪل 5: ProTac Rail Mount HL-X in operation.

5. اهم خاصيتون

  • هاء لومين آئوٽ: Delivers 1000 lumens for maximum illumination.
  • LED ٽيڪنالاجي: White LED technology, impervious to shock with a 50,000-hour lifetime.
  • TIR Optic: Produces a concentrated beam with optimum peripheral illumination.
  • ٻٽي ٻارڻ جي صلاحيت: Operates with two CR123A lithium batteries or one Streamlight rechargeable SL-B26 battery.
  • TEN-TAP پروگرامنگ: Offers three user-selectable operating modes (High/Strobe, High Only, Low/High).
  • ريموٽ پريشر سوئچ: Features momentary and constant-on operation for tactical flexibility.
  • Integrated Rail Clamp: Easily attaches to MIL-STD-1913 rails without tools for secure mounting.
  • پائيدار تعمير: Made from 6000 Series machined aircraft aluminum with an impact-resistant tempered glass lens.
  • پاڻي جي مزاحمت: IP67-rated (waterproof to 1 meter for 30 minutes) with standard push-button switch; IP54-rated (water-resistant) with remote pressure switch.
An infographic detailing the key features of the Streamlight 88066 ProTac Rail Mount HL-X, including 1000 lumens max output, 24 hours max runtime, 447 meters max distance, and multi-fuel battery type.

شڪل 6: مٿانview اهم خصوصيتن ۽ وضاحتن جي.

6. سار سنڀال

The Streamlight ProTac Rail Mount HL-X is designed for durability and requires minimal maintenance. Regular cleaning and proper battery management will ensure optimal performance.

  • صفائي: روشني کي نرم سان مسح ڪريو، ڊيamp مٽي ۽ ملبہ هٽائڻ لاءِ ڪپڙو. گھڙڻ واري صاف ڪندڙن کان پاسو ڪريو.
  • بيٽري مٽائڻ: Replace batteries as needed. Always use fresh, high-quality batteries.
  • او-رنگ: Periodically inspect O-rings for wear and tear. Lubricate with silicone grease if necessary to maintain water resistance.

7. مسئلا حل ڪرڻ

If your Streamlight ProTac Rail Mount HL-X is not functioning as expected, consider the following common issues:

  • روشني نه ٿي آن: Ensure batteries are correctly inserted with proper polarity and are not depleted. Check that the tail cap is fully tightened.
  • وقتي آپريشن: Verify that the tail cap and any remote switch connections are secure. Clean battery contacts if necessary.
  • مدھم لائيٽ آئوٽ: Replace batteries with fresh ones. Dim output often indicates low battery power.

If issues persist, refer to the warranty and support section for further assistance.

8. وضاحتون

خاصيتتفصيل
ماڊل نمبر88066
روشني جي وڌ ۾ وڌ پيداوار1000 Lumens
روشني50,000 Candela
بيم جو مفاصلو447 Meters (High)
طاقت جو ذريعوBattery Powered (2x CR123A or 1x SL-B26)
بيٽري سيل جي جوڙجڪليتيم
روشني جو ذريعو قسمايل اي ڊي
موادAluminum (6000 Series machined aircraft)
رنگڪارو
پيداوار جي ماپ5.43"ڊي x 1.45"ڊي x 1.72"ايڇ
شيءِ جو وزن6.4 اونس
پاڻي جي مزاحمت جي سطحIP67 (standard switch), IP54 (remote switch)
خاص خصوصيتHigh Power, Impact Resistant

9. وارنٽي ۽ سپورٽ

The Streamlight 88066 ProTac Rail Mount HL-X comes with a لائف ٽائيم وارنٽي. For warranty claims, technical support, or any questions regarding your product, please contact Streamlight customer service directly.

Visit the official Streamlight webسائيٽ تي وڃو يا پنهنجي پراڊڪٽ پيڪنگنگ ۾ ڏنل رابطي جي معلومات جو حوالو ڏيو جديد ترين سپورٽ تفصيلن لاءِ.