Hager SVN129 LED Pilot Light Instruction Manual

1. تعارف

This instruction manual provides essential information for the safe installation, operation, and maintenance of the Hager SVN129 LED Pilot Light. The SVN129 is a compact indicator designed for electrical panels and control systems, featuring red, green, and orange LED illumination and operating on a 230V AC supply.

مھرباني ڪري انسٽاليشن کان اڳ ھن دستور کي چڱي طرح پڙھو ۽ مستقبل جي حوالي لاءِ رکو.

2. حفاظت جي ڄاڻ

خبردار: Electrical installation should only be performed by qualified and authorized personnel. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• ڊوائيس کي انسٽال ڪرڻ يا سروس ڪرڻ کان اڳ هميشه مين سرڪٽ بريڪر تي بجلي بند ڪريو.
• پڪ ڪريو ته سڀئي وائرنگ مقامي ۽ قومي برقي ڪوڊن جي تعميل ڪن ٿيون.
• جيڪڏهن ڊوائيس خراب نظر اچي ته ان کي نه هلايو.
• This device is designed for indoor use in dry locations unless otherwise specified.
• جي فراهمي جي تصديق ڪريو حجمtage matches the device's rated voltagاي (230V AC).

3. پراڊڪٽ ختمview

The Hager SVN129 is an LED pilot light designed for clear visual indication within electrical systems. Its key features include:

• LED روشني: Provides bright red, green, and orange light for status indication.
• جلدtagاي درجه بندي: 230V AC تي ڪم ڪري ٿو.
• ماڊل سائيز: Occupies 1 module space in a standard electrical panel.
• تعدد: Designed for 50/60 Hz systems.

Figure 1: Hager SVN129 LED Pilot Light. This image displays the front view of the SVN129 LED pilot light, highlighting its compact form factor suitable for integration into electrical panels. The indicator features a clear lens, designed to display red, green, or orange light depending on the operational status.

4. سيٽ اپ ۽ تنصيب

Installation of the Hager SVN129 LED Pilot Light should be carried out by a qualified electrician in accordance with all applicable electrical standards and regulations.

1. پاور ڪنيڪشن: Ensure the main power supply to the installation area is completely disconnected and secured against accidental re-connection.
2. چڙهڻ: The SVN129 is designed for DIN rail mounting. Snap the device onto the DIN rail in the desired position within the electrical enclosure.
3. وائرنگ: Connect the 230V AC supply wires to the designated terminals on the pilot light. Refer to the wiring diagram on the device or packaging for correct polarity and connection points. Typically, these devices have two terminals for line and neutral connections.
4. محفوظ ڪنيڪشن: Ensure all terminal screws are tightened securely to prevent loose connections, which can cause overheating or intermittent operation.
5. تصديق: Double-check all wiring connections before restoring power.
6. پاور بحالي: Restore power to the circuit. The pilot light should illuminate according to the circuit status it is monitoring.

5. آپريٽنگ هدايتون

The Hager SVN129 LED Pilot Light operates as a visual indicator. Once correctly installed and connected to a 230V AC circuit, it will illuminate to indicate the status of that circuit or a specific condition within an electrical system.

• The specific color (red, green, or orange) displayed by the LED will depend on the model variant and the intended application for which it was selected.
• No user interaction is required for its operation beyond initial installation.

6. سار سنڀال

The Hager SVN129 LED Pilot Light is designed for minimal maintenance. However, periodic checks can ensure continued reliable operation.

• صفائي: If necessary, gently wipe the surface of the pilot light with a soft, dry, or slightly damp ڪپڙو. استعمال نه ڪريو abrasive cleaners يا solvents.
• چڪاس: Periodically inspect the device for any signs of physical damage, discoloration, or loose connections. If any issues are found, disconnect power and consult a qualified electrician.
• ڪوبه استعمال ڪندڙ قابل خدمت حصا: The LED pilot light contains no user-serviceable parts. Do not attempt to open or repair the unit.

7. مسئلا حل ڪرڻ

If the Hager SVN129 LED Pilot Light is not functioning as expected, consider the following troubleshooting steps:

• روشني نه ڏيندڙ:
  • Check if the power supply to the circuit is active.
  • Verify that the pilot light is correctly wired and connections are secure.
  • فراهمي جي مقدار کي يقيني بڻائيtage 230V AC آھي.
  • If the above steps do not resolve the issue, the device may be faulty and require replacement by a qualified electrician.
• وقتي آپريشن:
  • Check for loose wiring connections at the terminals.
  • Ensure stable power supply to the circuit.

For issues not covered here, contact a qualified electrician or Hager customer support.

8. وضاحتون

9. وارنٽي ۽ سپورٽ

For information regarding warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Hager website. For technical support or inquiries, please contact Hager customer service through their official channels.

نوٽ: پراڊڪٽ جون وضاحتون ۽ ظاهر بغير ڪنهن اڳواٽ اطلاع جي تبديلي جي تابع آهن.