1. تعارف
This manual provides detailed instructions for the installation, configuration, operation, and maintenance of your Yealink SIP-T46S IP Phone. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage.
The Yealink SIP-T46S is a high-performance IP phone designed for business professionals, featuring a 4.3-inch color display, support for up to 16 SIP accounts, dual-port Gigabit Ethernet, and Power over Ethernet (PoE) capabilities.
شڪل 1: سامهون view of the Yealink SIP-T46S IP Phone.
2. پيڪيج مواد
پڪ ڪريو ته سڀئي شيون توهان جي پيڪيج ۾ موجود آهن. جيڪڏهن ڪا به شيءِ غائب يا خراب آهي، ته پنهنجي وينڊر سان رابطو ڪريو.
- Yealink SIP-T46S IP Phone unit
- هينڊ سيٽ جي ڪنڊ سان
- ايٿرنيٽ ڪيبل (CAT5E UTP ڪيبل)
- فون اسٽينڊ
- تڪڙو شروع ھدايت
Note: A power adapter is not included. The phone supports Power over Ethernet (PoE) or requires a separate 5V DC, 2A power adapter.
3. سيٽ اپ
3.1 فون کي گڏ ڪرڻ
- اسٽينڊ کي ڳنڍيو: Align the stand with the slots on the back of the phone and push it in until it clicks into place. You can adjust the angle of the phone by selecting different slots.
- هينڊ سيٽ ڳنڍيو: Plug one end of the handset cord into the handset port on the phone (marked with a handset icon) and the other end into the handset.
- نيٽ ورڪ سان نيو: Plug one end of the Ethernet cable into the Internet port on the phone (marked with a network icon) and the other end into a network switch or router.
- پاور Connectنيو:
- If using Power over Ethernet (PoE), the phone will power on automatically once connected to a PoE-enabled network switch.
- If PoE is not available, connect an optional 5V DC, 2A power adapter (not included) to the DC5V port on the phone and then to a power outlet.
شڪل 2: زاويه view of the Yealink SIP-T46S IP Phone, showing ports for connections.
3.2 Initial Boot-up and Configuration
Upon successful power connection, the phone will begin its boot-up sequence. This may take a few minutes. The display will show the Yealink logo and then proceed to load the operating system.
- نيٽ ورڪ سيٽنگون: By default, the phone attempts to obtain network settings (IP address, subnet mask, gateway, DNS) via DHCP. If your network requires static IP configuration, this can be set up via the phone's menu or web انٽرفيس.
- ايس آءِ پي اڪائونٽ رجسٽريشن: Your service provider will typically provide the necessary SIP account details for registration. These can be entered via the phone's menu or, for more complex setups, through the phone's web انتظامي انٽرفيس.
- پهچڻ Web انٽرفيس: To access the phone's web interface for advanced configuration, obtain the phone's IP address from the phone's menu (Menu > Status). Enter this IP address into a web هڪ ئي نيٽ ورڪ سان ڳنڍيل ڪمپيوٽر تي برائوزر.
4. فون هلائڻ
4.1 بنيادي ڪال فنڪشن
- ڪال ڪرڻ:
- Pick up the handset, press the Speaker button, or press a Line button.
- ڪي پيڊ استعمال ڪندي نمبر ڊائل ڪريو.
- کي دٻايو ڊائل نرم چاٻي يا # چاٻي
- ڪال جو جواب ڏيڻ Pick up the handset, press the Speaker button, or press the جواب نرم چاٻي
- ڪال ختم ڪرڻ: Hang up the handset, press the Speaker button, or press the ڪال ختم ڪريو نرم چاٻي
- رکو: فعال ڪال دوران، دٻايو رکو بٽڻ ٻيهر شروع ڪرڻ لاء، دٻايو رکو button again or the corresponding Line button.
- منتقلي فعال ڪال دوران، دٻايو منتقلي button. Dial the number of the party you wish to transfer to, then press the منتقلي نرم چاٻي ٻيهر.
- خاموش: کي دٻايو گونگا ڪال دوران پنهنجي مائڪروفون کي خاموش ڪرڻ لاءِ بٽڻ. ان ميوٽ ڪرڻ لاءِ ان کي ٻيهر دٻايو.
- اسپيڪر فون: کي دٻايو اسپيڪر اسپيڪر فون کي چالو يا غير فعال ڪرڻ لاءِ بٽڻ.
- حجم جي ترتيب: استعمال ڪريو حجم buttons (located below the keypad) to adjust the volume of the handset, headset, or speakerphone during a call, or the ringer volume when the phone is idle.
4.2 Navigation and Soft Keys
- The 4.3-inch color display provides visual information and menu options.
- استعمال ڪريو نيويگيشن ڪلستر (up, down, left, right arrows, and OK button) to navigate through menus and lists.
- جي نرم چاٻيون (context-sensitive buttons below the display) change their function based on the phone's current state. Their current function is displayed on the screen directly above them.
- Dedicated buttons for Headset, Message, Redial, and Transfer provide quick access to these functions.
5. سار سنڀال
5.1 فون صاف ڪرڻ
To maintain the phone's appearance and functionality:
- Use a soft, dry cloth to wipe the phone's surface.
- ضدي نشانن لاءِ، هلڪو ڊيampڪپڙو پاڻي سان ڍڪيو. سخت ڪيميڪل يا رگڙيندڙ صاف ڪندڙ استعمال ڪرڻ کان پاسو ڪريو.
- Do not spray liquids directly onto the phone.
5.2 ماحولياتي خيالات
- Operate the phone within recommended temperature and humidity ranges.
- فون کي سڌي سج جي روشني، گرمي جي ذريعن ۽ گهڻي نمي کان پري رکو.
- ڊوائيس جي چوڌاري مناسب وائيٽليشن کي يقيني بڻائي.
5.3 فرم ویئر تازه ڪاريون
Periodically, Yealink may release firmware updates to improve performance, add features, or address issues. Refer to the Yealink support website or your service provider for information on how to check for and apply firmware updates.
6. مسئلا حل ڪرڻ
This section addresses common issues you might encounter with your Yealink SIP-T46S IP Phone.
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| فون آن نٿو ٿئي | No power supply; faulty cable; no PoE. | Check Ethernet cable connection. Ensure PoE is active or connect a 5V DC, 2A power adapter. Test with a different cable or power source if possible. |
| ڪوبه ڊائل ٽون | Network issue; SIP account not registered. | Verify network cable is securely connected. Check phone's network status (Menu > Status). Ensure SIP account details are correctly configured and registered. Reboot the phone. |
| غريب آڊيو معيار | Network congestion; faulty handset/headset; incorrect volume. | Check network connection and bandwidth. Adjust volume. Test with speakerphone or a different handset/headset. |
| Power light flashing after sleep mode | Default LED behavior setting. | This is often a configurable setting. Access the phone's web interface and navigate to features or power saving settings to adjust LED behavior. Consult your service provider or Yealink support for specific configuration parameters. |
| رسائي نه ٿو ڪري سگھجي web انٽرفيس | Incorrect IP address; network connectivity issue. | Verify the phone's IP address (Menu > Status). Ensure your computer is on the same network as the phone. Check network cables. |
6.1 فيڪٽري ري سيٽ
Warning: A factory reset will erase all custom configurations and return the phone to its default settings. Only perform this if instructed by support or as a last resort.
To perform a factory reset, typically you can access this option through the phone's menu (Menu > Advanced Settings > Reset to Factory) or by holding a specific key combination during boot-up. Refer to the Yealink support website for the exact procedure for your model.
7. وضاحتون
| خاصيت | تفصيل |
|---|---|
| ڏيکاريو | 4.3 انچ 480 x 272 پکسل رنگ ڊسپلي بيڪ لائيٽ سان |
| SIP اڪائونٽس | 16 تائين |
| Ethernet بندرگاهن | ٻٽي بندرگاهه گيگابٽ ايٿنيٽ |
| PoE سپورٽ | IEEE 802.3af پاور اوور ايٿرنيٽ |
| وائرليس ڪنيڪشن | Wi-Fi via WF40 USB Dongle (optional), Bluetooth via BT40 USB Dongle (optional) |
| طول و عرض (L x W x H) | 9.61 x 8.39 x 7.28 انچ (244mm x 213mm x 185mm) |
| شيءِ جو وزن | 3.09 پائونڊ (1.4 ڪلوگرام) |
| بجلي جي فراهمي | 5V DC, 2A (via PoE or optional AC adapter) |
| ٺاهيندڙ | يشينڪ |
| ماڊل نمبر | سيپ T46S |
| تاريخ پهرين دستياب | نومبر 22، 2016 |
8. وارنٽي ۽ سپورٽ
8.1 پروڊڪٽ وارنٽي
The Yealink SIP-T46S IP Phone is covered by a manufacturer's warranty. Please refer to the warranty card included with your product or visit the official Yealink webتفصيلي وارنٽي شرطن ۽ ضابطن لاءِ سائيٽ. وارنٽي دعوائن لاءِ خريداري جو ثبوت رکو.
8.2 ٽيڪنيڪل سپورٽ
For technical assistance, troubleshooting beyond this manual, or inquiries regarding your device, please contact Yealink customer support or your authorized Yealink reseller. Support contact information can typically be found on the official Yealink webسائيٽ (www.yealink.com).