1. اھم حفاظتي ھدايتون
Please read all instructions carefully before using the shredder and retain this manual for future reference. Failure to follow these instructions may result in injury or damage to the product.
- ٻارن ۽ پالتو جانورن جي پهچ کان پري رکو.
- Keep loose clothing, jewelry, hair, and other foreign objects away from the shredder opening.
- Do not insert fingers or hands into the shredder opening.
- شارڊر جي ويجهو ايروسول مصنوعات استعمال نه ڪريو.
- Do not shred wet paper, adhesive labels, or any materials not specified for shredding.
- Always unplug the shredder before moving, cleaning, or emptying the wastebasket.
- Place the shredder on a stable, level surface.
- جيڪڏهن بجلي جي تار خراب ٿي وڃي ته شريڊر نه هلايو.
2. پراڊڪٽ ختمview
The Bonsaii C149-C is a heavy-duty cross-cut paper shredder designed for office use, offering high security and continuous operation.
اهم خاصيتون:
- 18-Sheet Capacity: Shreds up to 18 sheets of 20lb bond paper per pass.
- 60-Minute Continuous Run Time: Equipped with an advanced cooling system for extended operation.
- Cross-Cut Shredding: Shreds paper into tiny particles (13/64 x 63/64 inches or 5 x 25mm) for P-4 security level.
- Multi-Material Shredding: Capable of shredding paper, credit cards, and staples.
- 6-Gallon Pull-out Wastebasket: Large capacity for less frequent emptying, with a transparent window.
- گھٽ شور آپريشن: Operates at approximately 62 dB for a quieter environment.
- 4 Casters: آسان حرڪت لاءِ.
- Auto Start/Stop & Reverse: Prevents paper jams and ensures smooth operation.
- اوور هيٽ ۽ اوور لوڊ تحفظ: Enhances durability and user safety.
پيداوار جا اجزاء:
Familiarize yourself with the main parts of your shredder:
تصوير: سامهون view of the Bonsaii C149-C Paper Shredder, showing the paper feed slot, control panel, transparent wastebasket window, and casters.
Image: Close-up of the shredder's control panel, displaying the AUTO/OFF/REV switch and indicator lights for Overheat, Overload, and Power.
3. سيٽ اپ
Follow these steps to set up your shredder for first use:
- پيڪ ڪريو: شريڊر کي احتياط سان ان جي پيڪنگ مان هٽايو. پيڪنگنگ مواد کي مستقبل جي ٽرانسپورٽ يا اسٽوريج لاءِ رکو.
- لڳائڻ: Place the shredder on a flat, stable surface. Ensure there is adequate space around the unit for ventilation. Avoid placing it near heat sources or in damp ماحول.
- انسٽال ڪريو Casters: If the casters are not pre-installed, insert them firmly into the designated slots at the bottom of the shredder.
- پاور Connectنيو: پاور ڪنڊ کي هڪ معياري 120V AC آئوٽليٽ ۾ لڳايو.
- گندگي جي ٽوڪري: Ensure the pull-out wastebasket is correctly inserted and fully closed. The shredder will not operate if the wastebasket is open or improperly seated.
Image: The Bonsaii C149-C shredder with its pull-out wastebasket open, illustrating its dimensions (14.2 inches width, 11.2 inches depth, 21.5 inches height) and 23-liter capacity, capable of holding over 400 A4 sheets.
Image: The Bonsaii C149-C shredder positioned in an office environment next to a desk, showing its overall dimensions (54.5 cm height, 28.5 cm width, 36 cm depth) relative to typical office furniture.
4. آپريٽنگ هدايتون
This section details how to operate your Bonsaii paper shredder effectively and safely.
ڪنٽرول سوئچ جا ڪم:
- اوٽو: The shredder is ready for operation. It will automatically start when paper is inserted and stop when shredding is complete.
- بند ڪريو شريڊر بند آهي.
- آر اي وي (ريورس): Activates the reverse function to clear paper jams. Hold the switch in this position until the jam is cleared.
ڇِپائي پيپر:
- ڪنٽرول سوئچ کي سيٽ ڪريو آٽو.
- Insert up to 18 sheets of paper (20lb bond) straight into the paper feed slot. Do not exceed the maximum capacity to prevent jams.
- The shredder will automatically start and shred the paper. It will stop once all paper has passed through.
Image: The Bonsaii C149-C shredder demonstrating its 18-sheet paper capacity and ability to shred credit cards, CDs, paper clips, and staples, highlighting the cross-cut blades.
Image: A visual representation of the P-4 high-security cross-cut shredding, showing paper being reduced to tiny particles measuring 13/64 x 63/64 inches (5 x 25mm).
Shredding Credit Cards and Staples:
The shredder can also destroy credit cards and staples. Insert them one at a time into the paper feed slot. Do not force multiple items.
Continuous Operation and Cooling System:
The C149-C is designed for continuous shredding for up to 60 minutes, thanks to its patented cooling system. This allows for shredding large volumes of documents without frequent cool-down periods.
Image: Diagram illustrating the 60-minute non-stop shredding capability of the Bonsaii C149-C, highlighting the internal patented cooling system that allows for continuous operation without waiting for cooling.
Automatic Jam Protection:
The shredder features an auto start/stop and auto-reverse function to prevent paper jams. If a jam occurs, the shredder will attempt to clear it automatically by reversing the blades. If the jam persists, refer to the Troubleshooting section.
Image: Diagram showing the Automatic Paper Jam Proof System, with arrows indicating Auto Start (forward motion) and Auto Reverse (backward motion) of the shredder gears.
اشارو بتيون:
- طاقت: Illuminates when the shredder is powered on and ready.
- وڌيڪ گرم: Illuminates if the shredder has been used continuously for too long and needs to cool down. Allow the shredder to rest until the light turns off.
- اوور لوڊ: Illuminates if too much paper has been inserted, causing a potential jam. Use the REV function to clear the overload.
Image: Visual representation of the shredder's control panel with indicator lights, showing how the Overheat and Overload lights signal operational status and protection features.
5. سار سنڀال
باقاعده سار سنڀال بهترين ڪارڪردگي کي يقيني بڻائي ٿي ۽ توهان جي شريڊر جي زندگي کي وڌائي ٿي.
ڪچري جي ٽوڪري کي خالي ڪرڻ:
- When the transparent window indicates the wastebasket is full, or the shredder stops operating (due to full bin sensor), set the control switch to بند.
- شريڊر کي پاور آئوٽليٽ مان ڪڍو.
- Pull out the wastebasket from the front of the shredder.
- Empty the shredded material into a suitable recycling bin.
- Reinsert the wastebasket firmly until it clicks into place.
- Plug the shredder back in and set the switch to آٽو آپريشن کي ٻيهر شروع ڪرڻ لاء.
Image: The Bonsaii C149-C shredder with its wastebasket full of shredded paper, illustrating the automatic stop feature when the 23-liter bin reaches capacity.
Oiling the Shredder Blades:
To maintain shredding performance and reduce wear, oil the shredder blades regularly (e.g., after every 30 minutes of cumulative shredding or once a month for light use). Use a shredder-specific lubricant sheet or liquid shredder oil.
- ڪنٽرول سوئچ کي سيٽ ڪريو بند ۽ شريڊر کي ان پلگ ڪريو.
- پيپر انٽري سلاٽ تي شريڊر آئل جي هڪ پتلي لڪير لڳايو.
- Plug the shredder back in and set the switch to REV for 2-3 seconds to distribute the oil.
- سوئچ کي سيٽ ڪريو بند and unplug the shredder again.
ٻاهرين صفائي:
شريڊر جي ٻاهرين حصي کي نرم، سڪل ڪپڙي سان صاف ڪريو. رگڙيندڙ صاف ڪندڙ يا محلول استعمال نه ڪريو.
6. مسئلا حل ڪرڻ
عام مسئلن جي حل لاءِ هن سيڪشن جو حوالو ڏيو جيڪي توهان کي درپيش اچي سگهن ٿا.
| مسئلو | ممڪن سبب | حل |
|---|---|---|
| شريڊر آن نٿو ٿئي. |
|
|
| ڪاغذ جو جام. |
|
|
| Shredder stops during operation (Overheat light on). | Continuous use has activated overheat protection. | Turn off the shredder and unplug it. Allow it to cool down for at least 30-60 minutes until the Overheat light turns off. |
| Shredder runs slowly or makes unusual noise. |
|
|
7. وضاحتون
Technical details for the Bonsaii C149-C Paper Shredder:
- ماڊل نمبر: C149-سي
- ڪٽڻ جو قسم: ڪراس ڪٽ
- ٽڪر جو سائز: 13/64 x 63/64 inches (5 x 25mm)
- سيڪيورٽي سطح پي-4
- چادر جي گنجائش: 18 sheets (20lb bond paper)
- مسلسل هلائڻ جو وقت: 60 منٽ
- Cool-down Time: لڳ ڀڳ 30-60 منٽ
- Wastebasket Capacity: 6 گيلن (23 ليٽر)
- ٽڪرا: ڪاغذ، ڪريڊٽ ڪارڊ، اسٽيپل
- شور جي سطح: 62 ڊي بي
- پيداوار جي ماپ: 14.2 x 11.2 x 21.5 انچ (36 x 28.5 x 54.5 سينٽي)
- شيء جو وزن: 23.1 پائونڊ
- خاص خاصيتون: Automatic Start/Stop, Auto-Reverse, Overheat Protection, Overload Protection, Casters
8. وارنٽي ڄاڻ
Bonsaii products are manufactured to high-quality standards. For specific warranty details, including duration and coverage, please refer to the warranty card included with your product or visit the official Bonsaii webسائيٽ. ڪنهن به وارنٽي دعوائن لاءِ خريداري جي ثبوت طور پنهنجي خريداري جي رسيد رکو.
9. سپورٽ ۽ رابطو
If you have any questions, require technical assistance, or need to report an issue with your Bonsaii Paper Shredder, please contact Bonsaii customer service. Bonsaii offers professional customer service to assist you within 24 hours.
- آن لائن سپورٽ: Visit the official Bonsaii webسوالن ۽ سپورٽ وسيلن لاءِ سائيٽ.
- Amazon سپورٽ: For purchases made through Amazon, you can contact the seller "Bonsaii US" via the Amazon platform.
