Clear-Com CC-400-X4 Double-Ear Headset User Manual

1. تعارف

This manual provides detailed instructions for the proper setup, operation, maintenance, and troubleshooting of your Clear-Com CC-400-X4 Double-Ear Headset. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

2. پراڊڪٽ ختمview

The Clear-Com CC-400 double-ear headset is engineered for high-quality audio communication. It features headphones designed for high ambient-noise attenuation and a hyper-cardioid dynamic microphone. The headset's flexible design and soft ear-pads contribute to user comfort. The microphone boom can rotate 300 degrees, which also functions as an On/Off switch for quick microphone muting.

Image 2.1: Clear-Com CC-400-X4 Double-Ear Headset. This image displays the Clear-Com CC-400-X4 double-ear headset. It features large, circumaural earcups designed for noise attenuation, an adjustable headband, and a flexible microphone boom arm extending from the left earcup. The microphone is a hyper-cardioid dynamic type. A 4-pin female XLR connector is visible at the end of the headset cable.

3. سيٽ اپ

3.1 هيڊ سيٽ کي ڳنڍڻ

1. Locate the 4-pin female XLR connector on the headset cable.
2. Connect the 4-pin female XLR connector of the headset cable to the corresponding male XLR port on your intercom system or audio device. Ensure the connection is secure.

3.2 آرام لاءِ ترتيب ڏيڻ

1. Adjust the headband for a secure yet comfortable fit on your head.
2. Position the earcups over both ears, ensuring they fully enclose your ears for optimal sound isolation and comfort.
3. Adjust the flexible microphone boom arm so the microphone is positioned approximately 1 to 2 inches from your mouth.

4. آپريٽنگ هدايتون

4.1 Microphone Activation and Muting

• The microphone is activated or muted by rotating the boom arm.
• خاموش ڪرڻ: Rotate the microphone boom arm upwards, away from your mouth.
• چالو ڪرڻ: Rotate the microphone boom arm downwards, towards your mouth.
• The boom arm has a 300-degree rotation range for this function.

4.2 آڊيو مانيٽرنگ

• Ensure your audio device or intercom system is properly configured for audio output to the headset.
• Adjust volume levels on your connected device as needed for comfortable listening.

5. سار سنڀال

5.1 صفائي

• To clean the headset's exterior, use a soft, dry cloth.
• For the soft ear-pads, a slightly damp cloth with a mild soap solution can be used. Ensure no moisture enters the earcup components. Allow the ear-pads to air dry completely before using the headset.
• Avoid using harsh chemicals or abrasive cleaners, as these can damage the headset's finish and materials.

5.2 اسٽوريج

• Store the headset in a clean, dry environment away from direct sunlight and extreme temperatures.
• Avoid wrapping the cable tightly around the headset, as this can cause stress and damage to the cable over time.

6. مسئلا حل ڪرڻ

6.1 ڪو به آڊيو آئوٽ پٽ ناهي

• ڪنيڪشن چيڪ ڪريو: Ensure all cable connections, especially the 4-pin XLR connector, are fully and securely seated in their respective ports.
• حجم سيٽنگون: Verify that the volume levels on your connected intercom system or audio device are not muted and are set to an audible level.
• ڊوائيس مطابقت: Confirm that the headset is compatible with the audio device it is connected to.

6.2 مائڪروفون ڪم نه ڪري رهيو آهي

• مائڪروفون پوزيشن: Ensure the microphone boom arm is rotated downwards (towards your mouth) to the 'on' position.
• ڪيبل سالميت: Inspect the headset cable for any visible damage or kinks.
• ٻئي ڊوائيس سان ٽيسٽ: If possible, test the headset with another compatible audio device to determine if the issue lies with the headset or the connected equipment.

6.3 خراب آواز جي معيار

• ڪيبل جي حالت: Check the headset cable for any signs of damage that might affect audio transmission.
• ڪن جي ڪپ جي مهر: Ensure the earcups are properly seated around your ears to provide optimal noise isolation and sound delivery.
• مداخلت: Move away from potential sources of electromagnetic interference that might affect audio quality.

7. وضاحتون

8. وارنٽي ۽ سپورٽ

Clear-Com products typically come with a standard manufacturer's warranty. For specific warranty details, service, or technical support, please refer to the official Clear-Com webسائيٽ تي وڃو يا سڌو سنئون انهن جي ڪسٽمر سروس سان رابطو ڪريو. ڪنهن به وارنٽي دعوائن لاءِ پنهنجي خريداري جي رسيد رکڻ جي صلاح ڏني وئي آهي.

وڌيڪ مدد لاء، دورو ڪريو جي Clear-Com official webسائيٽ.