Legrand LEG04704 Multifunction Timer User Manual

1. تعارف

This manual provides essential information for the safe and efficient installation, operation, and maintenance of the Legrand LEG04704 Multifunction Timer. Please read these instructions carefully before installation and retain them for future reference.

The Legrand LEG04704 is a single-module multifunction timer designed for controlling lighting circuits with adjustable timing and various load types. It operates on a 230V~ 50/60Hz power supply and provides a 16A 250V output.

2. مصنوعات جون خاصيتون

• Module Count: 1 module.
• بجلي جي فراهمي: 230 V~ 50/60 Hz.
• پيداوار: 16 A - 250 V~ (cos φ = 1).
• Adjustable Timing: 0.5 کان 12 منٽن تائين.
• لوڊ مطابقت:
  • تاپديپت ايلamps: 3680 W
  • هالوجن ايلamps (230 V~): 2000 W
  • هالوجن ايلamps with ferromagnetic transformer: 500 W
  • هالوجن ايلamps with electronic transformer: 2000 W
  • ڪمپيڪٽ فلورسنٽ ايلamps: 1000 VA
  • فلورسنٽ ايلamps (parallel compensated, ≤ 100 µF): 1000 VA
  • توانائي جي بچت lamps: 1000 W
• وائرنگ: Automatic recognition for 3 or 4-wire operation.
• ڪنٽرول انپٽس: Separate inputs (8-230V) for presence detection or intercom lighting control.
• افعال: End-of-timing pre-warning, 1-hour long duration function, and manual override.
• تحفظ: Self-protection mechanism in case of a blocked push-button.
• مطابقت: Accepts supply busbars.
• ماحولياتي: قابل استعمال مواد.

3. حفاظت جي ڄاڻ

خبردار: Electrical installation should only be performed by qualified personnel in accordance with national wiring regulations and safety standards.

• Always disconnect the main power supply before performing any installation, maintenance, or wiring work.
• جتي ضرورت هجي اتي مناسب گرائونڊنگ کي يقيني بڻايو وڃي.
• Do not exceed the specified load ratings for the timer.
• ڊوائيس کي نمي، مٽي، ۽ انتهائي گرمي پد کان بچايو.
• پڪ ڪريو ته سڀئي ڪنيڪشن محفوظ آهن پاور بحال ڪرڻ کان پهريان.

4. تنصيب

The Legrand LEG04704 timer is designed for DIN rail mounting within an electrical enclosure.

Image showing the Legrand LEG04704 multifunction timer. It is a grey, single-module device designed for DIN rail mounting. Visible features include screw terminals labeled 'N' and 'B' at the top, a timing adjustment dial marked from 0.5 to 12 minutes, and a manual override switch below it. The Legrand logo and model number '0047 04' are also visible. Lower terminals are labeled 'L' and '4'.

4.1. چڙهڻ

1. Ensure the main power supply to the installation is disconnected.
2. Clip the timer onto a standard DIN rail inside a suitable electrical enclosure.

4.2. وائرنگ ڪنيڪشن

Refer to the wiring diagram provided with the product and the labels on the device. The timer automatically recognizes 3 or 4-wire operation.

• N: غير جانبدار ڪنيڪشن.
• B: Input for control push-button (e.g., from a switch or presence detector).
• L: Live (Phase) input connection.
• 4: Switched Live (Phase) output to the load (e.g., lighting circuit).

Ensure all wire connections are tight and secure. Use appropriate wire gauges for the load current.

5. آپريٽنگ هدايتون

5.1. Setting the Timer Duration

The timing duration can be adjusted using the rotary dial on the front of the device. Use a small screwdriver to turn the dial to the desired time setting, ranging from 0.5 minutes to 12 minutes.

5.2. دستي اوور رائيڊ سوئچ

The timer features a manual override switch, typically located below the timing dial. This switch allows for continuous operation or manual OFF, bypassing the timed function. Refer to the symbols on the device for specific positions (e.g., timed operation, continuous ON, continuous OFF).

5.3. خاص ڪمَ

• Pre-warning Function: The timer may provide a visual indication (e.g., a brief flicker of the light) before the end of the timing period, allowing users to react before the light switches off.
• Long Duration Function: A specific input or sequence might activate a 1-hour timing period, useful for extended lighting needs.

6. سار سنڀال

The Legrand LEG04704 timer requires minimal maintenance.

• Ensure the power supply is disconnected before cleaning.
• نرم، سڪل ڪپڙي سان ٻاهرين حصي کي صاف ڪريو. رگڙيندڙ صاف ڪندڙ يا محلول استعمال نه ڪريو.
• There are no user-serviceable parts inside the device. Do not attempt to open or repair the timer.

7. مسئلا حل ڪرڻ

• Timer not activating:
  • چيڪ ڪريو ته مکيه بجلي جي فراهمي ڳنڍيل ۽ فعال آهي.
  • Verify all wiring connections (L, N, B, 4) are correct and secure.
  • Ensure the control push-button is functioning correctly.
  • Check the manual override switch position.
• Incorrect timing duration:
  • Adjust the rotary dial to the desired time setting.
• Load not switching off:
  • Check the manual override switch position; it might be set to continuous ON.
  • Ensure the load does not exceed the maximum specified rating.
• If issues persist, consult a qualified electrician or contact Legrand customer support.

8. وضاحتون

9. وارنٽي ۽ سپورٽ

Legrand products are manufactured to high-quality standards and are covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Legrand webسائيٽ.

For technical support, troubleshooting assistance, or inquiries regarding your Legrand LEG04704 Multifunction Timer, please contact Legrand customer service through their official channels.