SCULPFUN H4 Honeycomb Work Panels
Specifications
- Product Name: SCULPFUN H4 Honeycomb Panel
- Components: 2 honeycomb panels, 2 metal plates, 2 connection components, 8 screws, 8 silicone pads, 8 material clamps, 4 high-temperature adhesive tapes, 1 wrench
Product Usage Instructions
Assembly
- Identify the components and ensure all parts are included as listed.
- Place the honeycomb panels on the table with the side labeled “+ This side faces the table” facing downwards.
- Attach the metal plates to the honeycomb panels using the provided screws and wrench.
- Secure the connection components to join the panels together.
- Apply the silicone pads and material clamps as needed for stability.
Maintenance
Regularly check the tightness of screws and connections to ensure stability during use. Clean the panels and components with a soft cloth dampened with water and mild detergent when needed.
Storage
Store the assembled panel in a dry and cool place when not in use. Avoid exposure to direct sunlight or extreme temperatures.
FAQ
Q: How do I contact technical support?
A: For technical support, please reach out to suppo@sculpfun.com with your queries or concerns.
List of Items
- 2* honeycomb panel
- 2* metal plate
- 2* connection component
- 8* screws
- 8* silicone pad
- 8* material clamp
- 4* high-temperature adhesive tape
- 1* wrench
INSTALLATION INSTRUCTION
This side faces the table
Technical Support: support@sculpfun.com
Documents / Resources
 |
SCULPFUN H4 Honeycomb Work Panels [pdf] Owner's Manual H4 Honeycomb Work Panels, H4, Honeycomb Work Panels, Work Panels, Panels |
