Scolia home 2 Processing Unit User Manual

Scolia home 2 Processing Unit

Product Usage Instructions

• Do not expose the product to direct sunlight or hot surfaces.
• Operate the product for a maximum of 12 hours per day.
• Use only the provided power supply with the processing unit.
• In case of harmful interference, users are responsible for correcting it at their own expense.
• Unmount the Winmau Plasma from the wall.
• Mark two holes for the metal brackets aligned with the dartboard surround and drill the holes.
• Insert wall plugs into the holes and mount the metal brackets using the provided black screws and a screwdriver.
• Take down the dartboard surround and the dartboard.
• Remove the original legs of the Plasma light.
• Mount the camera legs to the Winmau Plasma light using small screws per leg, ensuring they are tightened simultaneously.
• Mount the Plasma light ring with the camera legs to the wall using one large screw per leg, positioning the LED light cable on the bottom right-hand side.
• Plug in USB cables, LAN cable, and power supply to the processing unit. Connect the power supply to the LED light as well.

HARDWARE LIST

NOT INCLUDED COMPONENTS

• This package does not contain a Winmau Plasma light surround, a dartboard surround, and a dartboard, which are essential parts of a complete auto-scoring system.

IMPORTANT!

• Do not expose the product to direct sunlight or a hot surface!
• Do not operate the product for more than 12 hours per day!
• Do not connect any power supplies to the processing unit other than the one in the packaging!
• In the unlikely event of the product causing harmful interference in domestic products, users are required to correct the interference at their own expense.

TIPS FOR HIGHER ACCURACY

• Mount the Scolia system on a solid wall (preferably brick or concrete).
• Mount the side covers included in the box to block external light sources and movement.
• Avoid using dark-coloured barrels, shafts, and flights.
• Sharpen your darts regularly to minimize the number of bounce-out throws.
• Stabilize your dartboard using wedges or other equipment.
• Do not use flash photography, and do not block the field of view of the cameras.

For more frequently asked questions, visit scoliadarts.com/faq

ASSEMBLING YOUR UNIT

STEP 1

• Unmount the Winmau Plasma from the wall.

STEP 2

• Mark two holes for the metal brackets by aligning them to the dartboard surround and drill the two holes.

STEP 3

• Insert two wall plugs into the holes and mount the metal brackets using a PH screwdriver and two black screws.

STEP 4

• Take down your dartboard surround and your dartboard.

STEP 5

• Remove the original legs of the Plasma light.

STEP 6

• Mount the camera legs to the Winmau Plasma light using two small screws per leg. Make sure the two screws are tightened simultaneously.

STEP 7

• Having the LED light cable on the bottom right hand side, mount the Plasma light ring with the camera legs to the wall using one large screw per leg.

STEP 8

• Plug in the USB cables, the LAN cable, and the power supply to the processing unit. Connect the power supply to the LED light as well.

STEP 9

• Attach the processing unit and the cover plate to the metal bracket using the magnets on the processing unit and on the metal bracket.

STEP 10

• Place back the dartboard and the dartboard surround on the wall.

STEP 11

• Turn on the unit and enjoy!

OPTIONAL STEP

• Attach the side covers to the legs one by one, using four screws per side cover.

SETTING UP THE SYSTEM

BOARD REGISTRATION

• Register your board at game.scoliadarts.com.

STEP 1

• Create an account or use your Google account to make the registration process even simpler.

STEP 2

• Once logged in, go to the My Boards page and click the Add new board button. Enter the following serial number:

STEP 3

• Add board information. Name your board and enter the town/city where you use it.

STEP 4

• Finalise the process by clicking on the Add board button.

BOARD CALIBRATION

SETTING UP THE SYSTEM

• On the My Boards page, go to the Board State section.
• Make sure your board is online.
• Click the Calibrate link and wait for the system to calibrate itself.
• Once the system is calibrated, your system is ready to play!

WIRELESS CONNECTION SETUP

• The WiFi dongle provides wireless connection to Scolia Home 2. The WiFi signal in the room must be stable and strong for smooth performance.

STEP 1

• Connect the processing unit to your router with the LAN cable. In case your router is too far, you can detach the unit from the metal bracket and carry it closer to the router. Turn on your unit.

STEP 2

• Once your Scolia is online, scroll down to the WiFi Configuration section.

STEP 3

• Search for your WiFi network, enter its password in the input field, and click Join.

STEP 4

• Wait for the Scolia board to connect to your WiFi network. Once it is connected, you can unplug the LAN cable from your unit.

ASSEMBLY VIDEO GUIDE

• scoliadarts.com/home2ap

CONTACT

NEED HELP?

• scoliadarts.com/faq
• support@scoliadarts.com

JOIN OUR COMMUNITY

• facebook.com/groups/scolia

FOLLOW US

• facebook.com/scoliatech
• instagram.com/scoliatech
• www.scoliadarts.com

TROUBLESHOOTING

• My board does not seem to be online. What should I do?
  • If your processing unit is connected via WiFi, switch to a direct LAN cable connection. Check the red and blue LED lights on the processing unit. The red light should be on, while the blue light should be blinking if your unit is operational.
• The system makes too many mistakes. What should I do?
  • Try to recalibrate your system by pressing the Calibrate link on the My Boards page, or turn your device off and on again after a few seconds. Make sure the area around the dartboard is clear during the calibration process. For further accuracy tips.

FAQ

• Do Scolia Home 2 owners access the same software functionalities as Home and Pro owners?
  • Yes, all Scolia users have access to the same Scolia application features at game.scoliadarts.com, including regular software updates.