Schneider Electric VW3A3601 Option Modules
Product Information
Specifications
- Product Name: Option Module VW3A3601
- Compatibility: Altivar Machine, Altivar Process, Altivar Soft Starter, Lexium MV Drive, ATV32, ATV320, ATV340, ATV600, ATV900
- Device Versions: V1.2IE03, V2.7IE23, V1.1IE02, V1.9IE09, V1.11IE01, V1.8IE05, V1.4IE06, V1.5IE08, V1.6IE01, V1.3IE01
- Communication Protocols: EtherCAT, PROFIBUS DP, CANopen, DeviceNet, Ethernet TCP/IP, POWERLINK, PROFINET, PROFINET + S2 Redundancy, Ethernet IP / Modbus TCP, Ethernet IP / Modbus TCP + MultiDrive Link, BACnet MS/TP
FAQ
- Q: How do I determine the compatibility of the Option Module with my device?
- A: Refer to the list of compatible devices and device versions provided in the user manual.
- Q: Can I use multiple communication protocols simultaneously with the Option Module?
- A: The Option Module supports various communication protocols but check the user manual for details on simultaneous usage.
- Q: What should I do if I encounter an error during installation or operation?
- A: Refer to the troubleshooting section in the user manual or contact Schneider Electric Customer Care Center for assistance.
Models
DANGER: HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
- Only appropriately trained persons who are familiar with and fully understand the contents of the present manual and all other pertinent product documentation and who have received all necessary training to recognize and avoid hazards involved are authorized to work on and with this equipment.
- Installation, adjustment, repair and maintenance must be performed by qualified personnel.
- Verify compliance with all local and national electrical code requirements as well as all other applicable regulations with respect to grounding of all equipment.
- Before performing work and/or applying voltage on the equipment, follow the instructions given in the appropriate installation manual.
Failure to follow these instructions will result in death or serious injury.
Specifications
| Option Module | Altivar Machine | Altivar Process | Altivar Soft Starter |
Lexium |
MV Drive |
||||
| ATV32 | ATV320 | ATV340
(1) |
ATV600
(2) |
ATV900 | ATS480 | LXM32 | ATV6000 | ||
| Device version ≥
(Option Module version ≥ ) |
|||||||||
|
VW3A3601 |
EtherCAT |
V1.2IE03 (V1.1IE08) |
V2.7IE23 (V1.9IE09) |
V1.1IE02 (V1.11IE01) |
V1.2IE02 (V1.8IE05) |
V1.4IE06 (V1.1IE08) |
✔ |
||
|
VW3A3607 |
PROFIBUS DP |
V1.1IE01 (V1.5IE01) |
V2.7IE23 (V1.12IE01) |
V1.1IE02 (V1.12IE01) |
V1.1IE01 (V1.9IE01) |
V1.1IE01 (V1.10IE01) |
V1.1IE01 (V1.16IE08) |
V1.0IE03 (V1.3IE01) |
✔ |
|
VW3A3608 VW3A3618 VW3A3628 |
CANopen |
V1.2IE03 (V1.1IE01) |
V2.7IE23 (V1.1IE01) |
V1.1IE02 (V1.1IE01) |
V1.1IE01 (V1.1IE01) |
V1.1IE01 (V1.1IE01) |
V1.1IE01 (V1.1IE01) |
V1.0IE03 (✔) |
✔ |
|
VW3A3609 |
DeviceNet |
V1.1IE01 (V1.1IE01) |
V2.7IE23 (V1.8IE01) |
V1.1IE02 (V1.8IE01) |
V1.1IE01 (V1.5IE05) |
V1.1IE01 (V1.5IE05) |
✔ |
||
|
VW3A3616 |
Ethernet TCP/IP |
V1.1IE01 (V1.2IE01) |
V2.7IE23 (V1.EIE01) |
V1.0IE03 (V1.1IE31) |
|||||
|
VW3A3619 |
POWERLINK |
V1.5IE08 (V1.0IE08) |
V2.7IE23 (V1.0IE08) |
V1.5IE10 (V1.1IE04) |
V2.2IE24 (V1.1IE04) |
V1.8IE14 (V1.1IE04) |
|||
|
VW3A3627 |
PROFINET |
V1.8IE11 (V1.0IE15) |
V2.7IE23 (V1.6IE01) |
V1.1IE02 (V1.6IE01) |
V1.1IE01 (V1.3IE01) |
V1.1IE01 (V1.3IE01) |
✔ |
||
|
VW3A3647 |
PROFINET
+ S2 Redundancy |
V3.8 (≥V3.0IE20) |
V3.9 (≥V3.0IE20) |
||||||
|
VW3A3720 |
Ethernet IP / Modbus TCP |
V1.5IE11 (V1.8IE12) (3) |
V1.1IE01 (V2.1IE00) |
||||||
|
VW3A3721 |
Ethernet IP / Modbus TCP + MultiDrive Link |
V1.6IE12 (V1.8IE13) (3) |
|||||||
|
VW3A3725 |
BACnet MS/TP |
V1.7IE16 (V1.1IEXX) |
|||||||
|
VW3M3301 |
DeviceNet |
≥V1.0IE03 ≤V1.20IE05 (V1.0) |
|||||||
|
VW3M3308 |
PROFINET |
V1.24IE03 (V1.0IE11) |
|||||||
|
VW3A3530D |
ATV dPAC Module |
For the Altivar Firmware Version, contact your Schneider Electric Customer Care Center on www.se.com/CCC |
|||||||
INSTALLATION INSTRUCTIONS
Mounting
ATV320 /ATV32
Removing
ATV320 / ATV32
Mounting
Mounting
LXM32M / ATV340
Removing
Mounting
ATV340, ATV600, ATV900
Removing
ATV340, ATV600, ATV900
Mounting
ATS480
Removing
ATS480
Electrical equipment should be installed, operated, serviced, and maintained only by qualified personnel.
No responsibility is assumed by Schneider Electric for any consequences arising out of the use of this product.
© 2023 Schneider Electric. All Rights Reserved.
Documents / Resources
 |
Schneider Electric VW3A3601 Option Modules [pdf] Instruction Manual VW3A3601, VW3A3601 Option Modules, Option Modules, Modules |