Schneider Electric ATV600 Altivar Process Variable Speed Drive
Introduction and Scope
|
Legal Information |
This product family is in the scope of European Union directive 2012/19/EU on Waste Electrical and Electronic Equipment WEEE.
This product may only be dismantled/disassembled and disposed of by appropriately trained persons and in compliance with all applicable regulations. |
|
|
Purpose |
This document is intended for use by professional end of life recyclers or waste treatment facilities. It provides the basic information for proper end-of-life treatment of product components and
materials. |
|
| In case of special transportation:
transportation method |
No special transportation. | |
|
Recyclability potential |
81% |
Based on “ECO’DEEE recyclability and recoverability calculation method” version V1, 20 Sep. 2008 presented to the French Agency for Environment and Energy Management:
ADEME. |
Safety Information
End of Life Instructions
| Recommendation | Number on drawing | Component / Material | Weight in g | Comment |
| To be depolluted | 1 | Electronic Board (Power and Communication) > 10cm² | 4369 | |
| To be depolluted | 2 | LCD and all those back-lighted with gas discharge lamps | 25 | |
| To be depolluted | 3 | Other battery | 2,9 | Lithium content: 0,07 g |
| To be depolluted | 4 | Cable (high current) | 1177 | |
|
To be depolluted |
5 |
Electrolyte capacitors which size: height > 25 mm, diameter > 25 mm or proportionately similar volume |
3200 |
|
|
To be dismantled |
6 |
Steel |
25310 |
Upper and Lower Housing, Bar, Cover, Support, Chassis |
| To be dismantled | 7 | Aluminium | 10916 | Heatsink, Bar |
|
To be dismantled |
8 |
PC, ABS-PC, PA, PA6, HDPE, SAN
with or without additives and other polymer |
331 |
Control Housing, Control Chassis, Cover |
| To be dismantled | 9 | Copper | 929 | Bar |
| Other | 12240,1 |
Product description
| Manufacturer identification | Schneider Electric Industries SAS |
| Brand name | Schneider Electric |
| Product reference | ATV630D90N4 |
|
Product function |
The main function of the Altivar Process product range is the speed control and variation of a synchronous, asynchronous or reluctance electric motor for fluid management and industrial applications. |
|
Description of the range |
This range consists of products Altivar 630, Altivar 930 and Altivar 955 with ratings from 30 to 45 kW for operation on 200V/240V and ratings from 55 to 90 kW for operation on 400V/480V and of products Altivar 340 with ratings from 45 to 75 kW in heavy duty and 55 to 90 kW in normal duty cycle for operation on 400V/480V, 3-phase supplies IP21/UL type 1. For the Altivar 340 products, the normal duty mode constitutes the referential mode. |
| Total representative product mass | 58,5 kg |
| Representative product dimensions | 922mm x 290mm x 323mm |
| Accessories | No accessories needed. |
| Date of information release | 11/2021 |
- Schneider Electric Industries SAS
- Country Customer Care Center http://www.schneider-electric.com/contact 35 rue Joseph Monier CS 30323
- FR 92500 Rueil Malmaison RCS Nanterre 954 503 439
- Capital social 896 313 776
- www.schneider-electric.com ENVEOLI1411014 V3
Documents / Resources
 |
Schneider Electric ATV600 Altivar Process Variable Speed Drive [pdf] Instruction Manual ATV600, ATV630, Altivar Process Variable Speed Drive, Variable Speed Drive, Speed Drive, ATV600, Drive |
