Schluter SHELF-W Tiled Walls
Specifications
| Dimension | Measurement |
|---|---|
| Width | 300 mm – 11-13/16″ |
| Depth | 115 mm – 4-1/2″ |
| Height | 50 mm – 2″ |
| Thickness | 4 mm – 5/32″ |
DIMENSION
Installation Steps
- Step 1
Apply a layer of thin-set mortar on the wall where the shelf will be installed.
- Step 2
Ensure the mortar is evenly spread with a notched trowel. - Step 3
Insert the shelf into the mortar, ensuring it is level and properly aligned. - Step 4
Allow the mortar to set according to the manufacturer’s instructions. - Step 5
Clean the surrounding area to remove any excess mortar.
- Step 6
Apply a bead of silicone sealant along the edges of the shelf for additional stability and water resistance. - Step 7
Allow the sealant to cure as per the manufacturer’s instructions before using the shelf.
FAQ
What tools are needed for installation?
You will need a notched trowel, thin-set mortar, and silicone sealant.
How long does the mortar take to set?
Refer to the mortar manufacturer’s instructions for setting times, typically 24 hours.
Can the shelf hold heavy items?
The shelf is designed for typical bathroom items; ensure proper installation for maximum strength.
Documents / Resources
 |
Schluter SHELF-W Tiled Walls [pdf] Installation Guide SHELF-W Tiled Walls, SHELF-W, Tiled Walls, Walls |