NextGen Freestanding barrier plates
MOD84FTPT Saginaw Control and Engineering
The NextGen Barrier plate line is the simple solution when you need to create separate compartments in your large enclosure. This barrier plate comes in three pieces for easy install.
The install is as follows:
Step 1: Loosen the bolts holding together the two enclosures.
Step 2: Slip the barrier plate over the loosened bolts.
Step 3: Slide the plate down and tighten the nuts.
Documents / Resources
 |
SCE SCE-MOD84FTPT Saginaw Control and Engineering [pdf] Instructions SCE-MOD84FTPT Saginaw Control and Engineering, SCE-MOD84FTPT, Saginaw Control and Engineering, Control and Engineering, Engineering |