SCANSTRUT logo

SC100
Installation Instructions

SCANSTRUT SC101 Pole System 1.9m

Radar:
SC101 / SC102 / SC103 / SC104/SC105
SC106 /SC107 / SC109 /SC107-CS/ SC109-CS

2 x Person Install

SCANSTRUT SC101 Pole System 1.9m - Symbol 1

SC101 Pole System 1.9m

Tools Required

SCANSTRUT SC101 Pole System 1.9m - Tools Required

Pole Top
SCANSTRUT SC101 Pole System 1.9m - Pole TopSCANSTRUT SC101 Pole System 1.9m - Box 1

Planning your Installation…

SCANSTRUT SC101 Pole System 1.9m - Fig 1SCANSTRUT SC101 Pole System 1.9m - Fig 2SCANSTRUT SC101 Pole System 1.9m - Fig 3SCANSTRUT SC101 Pole System 1.9m - Fig 4SCANSTRUT SC101 Pole System 1.9m - Fig 5SCANSTRUT SC101 Pole System 1.9m - Fig 6

IMPORTANT
SC100 pole systems are only compatible with marine electronics devices as stated in the latest Scanstrut Product Guide – subject to change without prior notice.
Use of the SC100 pole system with unapproved products, or overloading, invalidates any product warranty.
No liability is accepted for damage caused by incorrect installation.
The installation and assembly must be regularly inspected for evidence of damage or loose parts.
Product has been designed specifically for the mounting of approved marine electronics under normal boating conditions.

SCANSTRUT logo

Website: www.scanstrut.com | Email: sales@scanstrut.com | usasales@scanstrut.com

Documents / Resources

SCANSTRUT SC101 Pole System 1.9m [pdf] Instruction Manual
SC101 Pole System 1.9m, SC101, Pole System 1.9m

References

Leave a comment

Your email address will not be published. Required fields are marked *