SCANSTRUT logo

17-09-20 Issue 2
Installation Instructions

ROKK Wireless Sub (SC-CW-07E)

Parts List

SCANSTRUT ROKK Wireless Sub SC CW 07E - iquement con SCANSTRUT ROKK Wireless Sub SC CW 07E - emplacement
Charger Alcohol wipe

Techinhical Information

Input voltage range : 10-30V DC(12/24V system
Input currant max 1.5A
Output 5W (5V,1A)
Standby current draw <0.03W
Certifications Qi, CE,FCC, ROHS
Waterproof rating: IPX6 front and back

Tools Required

SCANSTRUT ROKK Wireless Sub SC CW 07E - Power drill Power drill
SCANSTRUT ROKK Wireless Sub SC CW 07E - cordo 64/65mm(2.5″) Hole Saw)
SCANSTRUT ROKK Wireless Sub SC CW 07E - router Straight router

SCANSTRUT ROKK Wireless Sub SC CW 07E - icon  READ THE IMPORTANT SAFETY INFORMATION LEAFLET BEFORE INSTALLING

Install options and cut out dimensions

SCANSTRUT ROKK Wireless Sub SC CW 07E - out dimensions

Remove self-adhesive backing

SCANSTRUT ROKK Wireless Sub SC CW 07E - ring available

Optional threaded locking ring available separately if self-adhesive is not suitable for the mounting surface. Part #: SC-CW-LOCK-01

Use an alcohol wipe to ensure the surface is free from dirt or grease and insert into the hole.

SCANSTRUT ROKK Wireless Sub SC CW 07E - hole

Overlay your choice of non-metallic surface, including wood, fabric, or marine traction surface. (Not provided). Maximum thickness ≤3mm. Ensure the charging logo is concentric over the charger.

SCANSTRUT ROKK Wireless Sub SC CW 07E - metallic surface

Connect wires to 12-24V supply, ensuring a waterproof connection. Fuse appropriately according to the input voltage and current, check the product is functioning correctly.

SCANSTRUT ROKK Wireless Sub SC CW 07E - Connect wires

SCANSTRUT logo

Documents / Resources

SCANSTRUT ROKK Wireless Sub SC-CW-07E [pdf] Installation Guide
SCANSTRUT, ROKK, Wireless Sub, SC-CW-07E

References

Leave a comment

Your email address will not be published. Required fields are marked *