DS-LP-MULTI-S
DS-LP-MULTI-BLK
18-09-2023 (Issue 1)
Installation Instructions
Parts List
Tools Required
 |
 |
 |
| ø2.5mm (3/32”) ø3mm (1/18”) Drill Bit |
ø35mm (1 3/8”) Hole Saw/Drill Bit |
Jig Saw |
 |
 |
 |
| Pozi Screwdriver | Silicone | Optional: Thread Lock |
| Material | Drill | Fixing |
| Soft Material e.g. plywood | 2.5mm (3/32″) | No.6 Screw (Included) |
| Hard Material e.g. fiberglass, hardwoods, acrylics | 3mm (1/8″) | |
| Metal e.g. Steel, aluminium | 4mm (5/32″) | Recommended >12mm x M4 Countersunk Bolt with washer and Nyloc (Not included) |
Cutting Template
For further installation and warranty information please visit: www.scanstrut.com
UK & International
+44 (0)1392531280
sales@scanstrut.com
USA
+1 860 308 1416
usasales@scanstrut.com
Documents / Resources
 |
SCANSTRUT DS-LP-MULTI-S Low Profile Multi Cable Seal [pdf] Installation Guide DS-LP-MULTI-S Low Profile Multi Cable Seal, DS-LP-MULTI-S, Low Profile Multi Cable Seal, Profile Multi Cable Seal, Multi Cable Seal, Cable Seal |