sauermann KT120 Class 120 Kistock Data Loggers User Guide

CLASS 120 KISTOCK DATA LOGGERS
KT120 / KH120
Quick Start Guide
www.sauermanngroup.com

Contents hide

Quick start guide

Reference	Parameters
KT 120	Temperature
KH 120	Temperature, humidity

Operating temperature, protection of the instruments and information about storage and the battery

Operating temperature*: KT120: from -40 to +70 °C; KH120: from -20 to +70 °C
KT120: IP65; KH120: IP20

Storage temperature: from -40 to +85 °C

Battery power supply: 1 x CR2450 (button battery*)

Display

DATASET is finished.
Indicates that one value is being recorded. It flashes: the DATASET did not start already.
Flashing slowly: DATASET is between 80 and 90% of the storage capacity.
Flashing quickly: DATASET is between 90 and 100% of the storage capacity.
Constant: storage capacity full.

The displayed values are the recorded maximum/minimum values for the displayed channels.
Indicates the alarm action
type: rising or falling action.
Constant: indicates that the batteries have
to be replaced.
Indicates the channel number which is measuring.
°C: Temperature in °Celsius
°F: Temperature in °Fahrenheit
%RH: Relative humidity (KH 120)
Dimensions (mm)
* The battery must be in compliance with the IEC 60086-4 standard.

Connections
PC connection input
Recorder fuction
The KISTOCK allows to record the values measured instantaneously, it records the values according to a predefined interval.
On the other hand, it is possible to operate continuously the KISTOCK thanks to a loop recording.
3 types of dataset start
The measurement dataset can be launched:
• With a delayed start (with predefined date and time)
• With the software
• With push-button
6 types of dataset stop
You can stop your dataset:
• According to a date and time (if it was started the same way)
• According to a recording duration
• According to a predefined number of recording points
• If the storage capacity of the memory is full
• With “Stop” option of the software
• By holding “OK” key during about 5 seconds, if this function has been previously activated by the software.

Mounting
The KISTOCK data loggers have a magnetic mounting, so you can fix it easily.
1. Magnetic mounting
2. Battery cover
3. Locking sign of the battery cover
Replace the battery
With 500 days to 3 years* of battery life, KISTOCK devices guarantee long-term measurements.
To replace the battery:
• Unlock the battery cover.
• Insert the battery (CR 2450 button battery**) with the + pole visible.
• Replace the battery cover with the indicator in front of the opened padlock and close it by turning it towards the right in order to make correspond the indicator with the closed padlock.
*On the basis of 1 measurement each 15 minutes at 25 °C.
**The battery must be in compliance with the IEC 60086-4 standard.

Accessorios
Consulte la ficha técnica para obtener más información sobre los accesorios disponibles.

Mantenimiento: evitar disolventes agresivos. Proteger el instrumento cuando se limpie con formol la superficie donde esté instalado (salas limpias, conductos…).
Download the data sheet
https://sauermanngroup.com/en-INT/technical-documents?search=120

Customer service portal / Portail service clients
Use our Customer service portal to contact us Utilisez notre Portail service clients pour nous contacter

http://kimo-en.custhelp.com
Sauermann Industries – ZA Bernard Moulinet – 24700 – Montpon – France
www.sauermanngroup.com

QSG – Kistock classe 120 – 17/01/2022 – Non-contractual document – We reserve the right to modify the characteristics of our products without prior notice.