SATECHI Slim X3 Bluetooth Backlit Keyboard

SATECHI Slim X3 Bluetooth Backlit Keyboard

USER MANUAL

Safety Instructions

Warning: Fire,electric shock,damage to keyboard devicecould occur if the following instructions are not obeyed

  1. Keep away from microwave radiation source
  2. Do not place heavy objects on this product
  3. No dropping and bending
  4. Keep away from oil, chemical, or organic solvents

FUNCTIONS

FUNCTIONS

Note: The keyboard layout function is based on iOSand macOS default settings. The output might differ for different OS.

1. ON/OFF Switch
2. Power/Charging LED Indicator
3. FN Lock LED Indicator
4. Bluetooth Device Keys with LED Indicator
5. FN Key
6. USB-C Charging Port
7. Media / Function Keys
8.Caps Lock LED Indicator
9. Numberpad

ON/ OFF

ON/ OFF

To turn the keyboard on, move the switch on the top of the device to the ·on· position. The power indicator turns green for 3 seconds. and then turns off.

PAIRING YOUR DEVICES

1. Press and hold one of Bluetooth keys for 3 seconds to assign a device to it. White LED Light should start blinking.

PAIRING

2. On the host device, look for “Slim X3 Keyboard • in the Bluetooth setting, choose “Connect” to pair. The white LEDwill stop blinking, indicating a successful pairing. Repeat process to add up to 4 Bluetooth devices

Slim X3 Keyboard 

Note:

  1. After 30minutes non-operation, thekeyboard will go tosleep mode Please press any key to wake up.
  2. Quickly switch between  BLUETOOTHto switch devices.
  3. For buttons F1 F15 press  BUTTON to enable the functions.

LED INDICATORS

  • On/Off turns green for 4s and turns off.
  • Low Battery – flashes green when it’s low battery.
  • Charging – turns red when it’s charging.
  • Fully Charged – turns green and stays green.
  • Press BUTTON  to swap between Media keys and F-Keys. The white LED light gets brighter indicating Fn lock is enabled.

LED

BACKLIGHT

There are 1O backlight levels. You can change the backlight levels at any time by pressing BUTTON.

Note: Backlight rums off when battery ,s lowBacklight wHI dim after 1 min. of inactivity andit will turn off after 3 min. inactivity. Click any key towake keyboard.

CHARGING YOUR KEYBOARD

KEYBOARD

1. When the battery is low, the power indicator will flash green. Connect the keyboard to a computer or USB·C wall adapter using the included USB·C charging cable

2. Charge the keyboard for 2 to 3 hours, or until the red charging LEDlight turns green. The keyboard can be used either wired or wirelessly while charging

WIRED MODE

WIRED MODE

Press Fn to activate the wiredmode when USB·C cable is connected. The power LED light turns green. Press  1-4 button to switch back to Bluetooth mode.

HOT KEY FUNCTION SUPPORT TABLE

SYMBOL macOS FUNCTION  iOS FUNCTION
SYMBOL Decrease Display Brightness Decrease Brightness
SYMBOL Increase Display Brightness Increase Brightness
SYMBOL Spotlight Search Spotlight Search
SYMBOL App Switcher App Switcher (iPad only)
SYMBOL Decrease Keyboard Backlight Decrease Keyboard Backlight
SYMBOL Increase Keyboard Backlight Increase Keyboard Backlight
Track Previous Track Previous Track
SYMBOL Play/ Pause Play/ Pause
SYMBOL Next Track Next Track
SYMBOL Mute Mute
SYMBOL Volume Down Volume Down
SYMBOL Volume Up Volume Up
SYMBOL Eject Activate Virtual Keyboard
SYMBOL Fn Lock Fn Lock
SYMBOL, Clear Clear

FCC STATEMENT

This device complies with part 15 of the FCC results.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference and
2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This Equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1.1. Reorient or relocate the receiving antenna
1.2. Increase the separation between the equipment and receiver
1.3. Connect the equipment into and outlet on a circuit different from that to which the receiver is connected
1.4. Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.

CE DECLARATION OF CONFORMITY

Satechi declares that this product is in compliance with the essential requirements and other relevant provisions of applicable EC directives. For Europe, a copy of the Declaration of Conformity for this product may be obtained by visiting https://satechi.neVsupport/doc

IC: 24917-STBTSX

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device

NEED HELP?

+18582681800

asupport@satechi.com

7365Mission Gorge Rd. Ste. G

San Diego.CA 92120,USA

www.satechi.net


FAQS Frequently Ask & Question

Can I use this as a wired keyboard?

A: Yes, the Slim X3 Keyboard includes USB wired connectivity. Pressing the “FN + EJECT” keys will activate the USB wired mode for the keyboard.

 How do I pair with Windows 1 O?

A: You need to pair through Control Panel and not Bluetooth Settings.

Does the keyboard come with different color light options?

A: Unfortunately, the keyboard is only equipped with a white backlight. However, you are able to cycle through 10 different brightness options.

How long does the battery last on a full charge?

A: The battery life of the keyboard can vary depending on the level of the backlight brightness but the longest the keyboard can last on a full charge is approximately 80 hours.

Why did my keyboard backlight dim/turn off automatically?

A: The backlight will automatically dim after one minute of non-usage. It will also turn off automatically once it reaches low-power mode. (Green flashing LED =Low-Power Mode).

Documents / Resources

SATECHI Slim X3 Bluetooth Backlit Keyboard [pdf] User Manual
Slim X3 Bluetooth Backlit Keyboard, Slim X3, Bluetooth Backlit Keyboard, Backlit Keyboard, Keyboard

References

Leave a comment

Your email address will not be published. Required fields are marked *