SANUS logo1 SANUS WSSE1A1, WSSE1A2 Height Adjustable Speaker Stand

WSSE1A1 / WSSE1A2

Height-Adjustable Speaker Stand
For SONOS® Era 100™
INSTRUCTION MANUAL

We’ll Make It Stress-Free

If you have any questions along the way, just give us a call.
US: +1 800-359-5520EMEA: +31 (0) 495 580 852 • UK: +44 (0) 800 056 2853
We’re ready to help!

IMPORTANT SAFETY INSTRUCTIONS

— PLEASE READ ENTIRE MANUAL PRIOR TO USE — SAVE THESE INSTRUCTIONS

Before getting started, let’s make sure this product is perfect for you!

This stand is designed to support only Sonos® Era 100™ speakers.

Caution Icon 2 CAUTION: Avoid potential personal injuries and property damage!

  • Check your speaker owner’s manual to see if there are any special requirements for mounting your speaker.
  • Please read through these instructions completely to be sure you’re comfortable with this easy install process.
  • Do not use this product for any purpose not explicitly specified by manufacturer.
  • Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
  • If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, contact Customer Service at US: +1 800-359-5520 • EMEA: +31 (0) 495 580 852 • UK: +44 (0) 800 056 2853.

Speaker Weight Limit

DO NOT EXCEED

SANUS WSSE1A1 - Weight
Tool Needed
SANUS WSSE1A1 - Screwdriver

Screwdriver

Dimensions

TOP VIEW

SANUS WSSE1A1 - Dimensions 1

3-D

SANUS WSSE1A1 - Dimensions 2

FRONT VIEW

SANUS WSSE1A1 - Dimensions 3

SIDE VIEW

SANUS WSSE1A1 - Dimensions 4

Parts and Hardware

Caution Icon 2 WARNING: This product contains small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts!

Note Icon 3 NOTE: Not all hardware included will be used.

Quantities shown are for one speaker stand.

STEP 2

SANUS WSSE1A1 - Parts and Hardware 1a

STEP 3

SANUS WSSE1A1 - Parts and Hardware 2a

OPTIONAL
SANUS WSSE1A1 - Parts and Hardware 2b

STEP 4

SANUS WSSE1A1 - Parts and Hardware 3aSANUS WSSE1A1 - Parts and Hardware 3c

STEP 5

SANUS WSSE1A1 - Parts and Hardware 3b

STEP 6                  STEP 7                     STEP 8

SANUS WSSE1A1 - Parts and Hardware 4a              SANUS WSSE1A1 - Parts and Hardware 4b               SANUS WSSE1A1 - Parts and Hardware 4c

(01) Pillar
(02) Base
(03) Lock Washer
(04) M6 x 20mm
Pillar Screw
(05) Isolation Pad
(06) M6 x 20mm
Carpet Spike
(07) M6
Jam Nut

(08) Top Bracket
(09) M5 x 14mm
Speaker/Bracket Screw

(10) Speaker Bracket
(11) 10-24 x 3/8 in.
Securement Screw
(12) Release Trigger
(13) Cable Management Clip

STEP 1  Route Cable(s)

SANUS WSSE1A1 - Route Cable

STEP 2  Attach Base to Pillar

SANUS WSSE1A1 - Attach Base to Pillar

STEP 3  Install Isolation Pads -or- Carpet Spikes

SANUS WSSE1A1 - Install Isolation Pads -or- Carpet Spikes

  1. Rubber Isolation Pads
    Twist rubber pads (05) into the base (02).
  2. Optional  Carpet Spikes
  3. HEIGHT ADJUST
  4. Caution Icon 2 WARNING:The ends of carpet spikes (06) are sharp and may scratch flooring, damage wiring, or be hazardous to children.
STEP 4  Attach Top Bracket

SANUS WSSE1A1 - Attach Top Bracket

STEP 5  Install Speaker Bracket

SANUS WSSE1A1 - Install Speaker Bracket

STEP 6  Install Speaker

SANUS WSSE1A1 - Install Speaker

STEP 7  Height Adjustment

SANUS WSSE1A1 - Height Adjustment 1 RAISE

SANUS WSSE1A1 - Height Adjustment 2

SANUS WSSE1A1 - Height Adjustment 3 LOWER

Caution Icon 2 CAUTION: Avoid potential personal injuries and property damage!

Hold upper post (01) BEFORE pressing trigger button (12).

Trigger button (12) is removable to prevent accidental lowering, or to route cables into post (01) (STEP 8).

SANUS WSSE1A1 - Height Adjustment 4

STEP 8  Secure Cables

SANUS WSSE1A1 - Secure Cables

SANUS logo1

Thank you for choosing SANUS! Please take a moment to let us know how we did:

Legrand AV Inc.
6436 City West Parkway
Eden Prairie, MN 55344 USA

US: +1 800-359-5520

Legrand AV Netherlands B.V.
Franklinstraat 14
6003 DK Weert Netherlands

UK: +44 (0) 800 056 2853
EMEA: +31 (0) 495 580 852

Authorized Representative for the UK
Starline Holding Technology Ltd.
Unit C Island Road
Reading RG2 0RP UK

Legrand AV Inc. and its affiliated corporations and subsidiaries (collectively, “Legrand”), intend to make this manual accurate and complete. However, Legrand AV makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. Legrand AV makes no representation of warranty, expressed or implied, regarding the information contained herein. Legrand AV assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.

©2022 Legrand AV Inc. All rights reserved. SANUS is a brand of Legrand. SANUS and the SANUS logo are registered trademarks of Legrand.
Sonos and Sonos product names are trademarks or registered trademarks of Sonos, Inc. All other brand names or marks are used for identification purposes and are trademarks of their respective owners.

Legrand AV Inc. • 6436 City West Parkway • Eden Prairie, MN 55344 USA

6901-603098 00

Documents / Resources

SANUS WSSE1A1, WSSE1A2 Height Adjustable Speaker Stand [pdf] Instruction Manual
WSSE1A1, WSSE1A2, WSSE1A1 WSSE1A2 Height Adjustable Speaker Stand, WSSE1A1 Height Adjustable Speaker Stand, WSSE1A2 Height Adjustable Speaker Stand, Height Adjustable Speaker Stand, Adjustable Speaker Stand, Speaker Stand, Stand

References

Leave a comment

Your email address will not be published. Required fields are marked *