SAMTEC IPT1-IPS1 Flexible Power Systems Owner’s Manual
FEATURES & BENEFITS
- Board-to-board and discrete wire cable systems
- Power Mate® system with polarized guide posts
- Mini Mate® system with reliable Tiger Buy™ contacts
- Individually shrouded contacts
- Elevated stack heights
- Optional polarization
- Vertical and right-angle for parallel, perpendicular and coplanar applications
- Rugged metal or plastic latching systems
- Cable components and tooling available
Selectively loading contacts achieves customer specific creepage and clearance requirements.
KEY SPECIFICATIONS
| SERIES | IPT1/IPS1 | IPBT/IPBS | HPM/HPW/HPF | FWJ/HFWJ/FHP |
| PITCH | (2.54 mm) .100″ | (4.19 mm) .165″ | (5.08 mm) .200″ | (3.96 mm) .156″ |
| CCC (1 PIN)* | 5.9 A | 10.3 A /pin (2 pins powered) | 16.6 A | 13.1 A |
| CCC (2 PINS)* | 4.8 A | 8.4 A/pin (4 pins powered) | 14.4 A | 11.2 A |
| CCC (3 PINS)* | 4.1 A | 7.6 A/pin (6 pins powered) | 13.2 A | 10.3 A |
| CREEPAGE | (2.54 mm) .100″ | (4.27 mm) .168″ | (3.94 mm) .155″ | (3.92 mm) .154″ |
| CLEARANCE | (1.91 mm) .075″ | (3.05 mm) .120″ | (3.94 mm) .155″ | (2.82 mm) .111″ |
| VAC | 775 | 400 | 850 | 600 |
| VDC | 1095 | 565 | 1200 | 845 |
| CYCLES | 1000 (MFG Tested) | 100 | 100 | 100 |
IPT1
NO. PINS PER ROW
- 05
- 10
- 15
- 20
- 25
- (Standard Sizes)
LEAD STYLE
Specify LEAD STYLE from chart
PLATING OPTION
–L = 10 µ” (0.25 µm) Gold on contact, Matte Tin on ta
Requires -01
Lead Style (Leave blank for Through-hole)
D
TAIL OPTION
- Requires -01 Lead Style (Leave blank for Through-hole)
- –RA = Right-angle
- –VS = Surface Mount
OTHER OPTIONS
- -A= Alignment Pin (–VS only) (N/A with –LC)
- –LC = Locking Clip (Manual placement required) (–VS only) (N/A with –A)
- –K = (6.00 mm) .236″ DIA Polyimide film Pick & Place Pad (–VS only)
- –TR = Tape & Reel (–VS only)
- –FR = Full Reel Tape & Reel (must order max. quantity per reel; contact Samtec for quantity breaks) (-VS only)
IPT1 Board Mates: IPS1
Through-hole Surface Mount
-VS
-RA
| LEA STYLE | MATED HEIGHT | A | B |
| –01 | (11.05) .435 | (6.35) .250 | (2.16) .085 |
| -01-VS | (13.59) .535 | (6.35) .250 | N/A |
| –02 | (14.00) .551 | (9.30) .366 | (2.64) .104 |
| –03 | (16.00) .630 | (11.30) .445 | (2.16) .085 |
| –04 | (17.00) .669 | (12.30) .484 | (2.69) .106 |
| –05 | (19.00) .748 | (14.30) .563 | (2.46) .097 |
| –06 | (20.00) .787 | (15.30) .602 | (2.35) .093 |
| –07 | (25.00) .984 | (20.30) .799 | (2.31) .091 |
| –08 | (30.00) 1.181 | (25.30) .996 | (2.39) .094 |
IPS1
1
NO. PINS PER ROW
- 05
- 10
- 15
- 20
- 25
- (Standard Sizes)
01
PLATING OPTION
- –L = 10 µ” (0.25 µm) Gold on contact, Matte Tin on tail
D
TAIL OPTION
- Leave blank for Through-hole
–RA = Right-angle - –VS = Surface Mount
OTHER OPTIONS
- –LC = Locking Clip (Manual placement required) (–VS only)
- –K = (5.50 mm) .217″ DIA Polyimide film Pick & Place Pad (–VS only)
- –TR = Tape & Reel (–VS only)
- –FR = Full Reel Tape & Reel (must order max. quantity per reel; contact Samtec for quantity breaks) (-VS only)
IPS1 Board Mates: IPT1
Through-hole Surface Mount
-VS
-RA
Note:
Some lengths, styles and options are non-standard, non-returnable
View complete specifications at: samtec.com?IPT1 & samtec.com?IPS1
Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtec’s specifications which are subject to change without notice.
Downloaded from Arrow.com.
Documents / Resources
 |
SAMTEC IPT1-IPS1 Flexible Power Systems [pdf] Owner's Manual IPT1-IPS1 Flexible Power Systems, IPT1-IPS1, Flexible Power Systems, Power Systems |
