S1134 Series Multi-channel Signal Generator
(Frequency Range: 10MHz – 40GHz, 2-8 channels)
Owner’s Manual
Key Features
- Frequency range: 10MHz to 40GHz
- 2-8 RF output channels which can operate individually
- Maximum output power: ≥+15dBm
- Phase noise: <-116dBc/Hz (10GHz, 10kHz offset)
- Phase coherent among every channel
- Channel to channel relative phase drift (10GHz, 24h) ≤±1°
- High-speed frequency switching <10us
- Narrow pulse modulation, minimum pulse width 50ns
- Rise/fall time 10ns
Overview
Saluki S1134 series signal generator is a phase-coherent and low phase noise signal generator with 2-8 channels. Every channel can be independently fully adjusted.
S1134 series can cover frequency range from 10MHz to 40GHz with frequency resolution as low as 0.01 Hz.
The instrument comes in a standard 2U/3U rack-mount form and offers LAN control interface, which allows easy and fast communication. Remote control of the instrument can be quickly attained from any host system. Application programming interface (API) or programming examples make the control implementation very easy.
Applications: Local Oscillator Replacement / Component Test / Receiver Sensitivity Test / R&D low noise microwave generator
Technical Specifications
| Model | S1134 Series |
| Output | |
| Frequency Range | 10MHz – 20/40GHz (each channel can be different) *For other frequency range, contact us for customization* |
| Output Channel | 2-8 channels |
| Frequency Resolution | 0.01Hz |
| Maximum Output Power | 10MHz to 20GHz: +15dBm 20GHz to 40GHz: +13dBm |
| Minimum Output Power | -110dBm |
| Power Resolution | 0.01dB |
| Switching Speed | ≤20ms |
| Power Level Uncertainty | ≤±1.3dB @>-20dBm ≤±1.5dB @-20 to -70dBm ≤±3dB @≤ -70dBm |
| Harmonic Spurious | ≤-50dBc @10dBm output |
| Non-harmonic Spurious | 10MHz – 12GHz: ≤-70dBc 12GHz – 20GHz: ≤-65dBc 20GHz – 40GHz: ≤-60dBc |
| Channel to Channel Isolation | ≥80dB |
| Pulse Modulation | Minimum pulse width 50ns |
| SSB Phase Noise (@10GHz ) | ≤-86dBc/Hz@100Hz ≤-108dBc/Hz@1KHz ≤-116dBc/Hz@10KHz ≤-116dBc/Hz@100KHz ≤-120dBc/Hz@1MHz ≤-140dBc/Hz@10MHz |
| SSB Phase Noise (@10GHz ) |  |
| Frequency Reference | |
| Both external and internal reference supported | |
| Internal Reference Frequency Temperature Stability | ±5e-8, 0°C to+50°C |
| Internal Reference Frequency | 10MHz |
| Internal Reference Output Power | ≥ 5dBm |
| External Reference Input Level Range | 5dBm – 10dBm |
| SSB of Internal Reference | ≤-125dBc/Hz@10Hz ≤-140dBc/Hz@100Hz ≤-150dBc/Hz@1KHz ≤-155dBc/Hz@10KHz ≤-155dBc/Hz@100KHz |
| General Information | |
| LAN Control | RJ-45 (TCP/IP over Ethernet ) |
| Operation Temperature | 0°C to +50°C |
| Operation Humidity | 20%-80% (+30°C) |
| Power Supply | AC 176-264VAC, 45Hz-65Hz |
| Dimension | 483 (W) × 89 (H) × 559 (D) mm (2U) 483 (W) × 134 (H) × 559 (D) mm (3U) |
| Weight | ≤20kg |
Ordering Information
The output frequency of each channel can be configured flexibly.
| Module No. | Item |
| S1134D | 2-channel output, frequency range: 10MHz-20GHz/40GHz |
| S1134T | 3-channel output, frequency range: 10MHz-20GHz/40GHz |
| S1134Q | 4-channel output, frequency range: 10MHz-20GHz/40GHz |
| S1134F | 5-channel output, frequency range: 10MHz-20GHz/40GHz |
| S1134S | 6-channel output, frequency range: 10MHz-20GHz/40GHz |
| S1134H | 7-channel output, frequency range: 10MHz-20GHz/40GHz |
| S1134O | 8-channel output, frequency range: 10MHz-20GHz/40GHz |
Example:
S1134T-224: 3CH output, t channels are 10MHz-20GHz, 1 channel is 10MHz-40GHz.
S1134Q-2222: 4CH output, all channels are 10MHz-20GHz.
Note: Information will conduct the necessary updates, the contents of this document are subject to change without notice
No.367, Fuxing N. Rd.,105 Taipei,Taiwan
Tel: +886.909 602 109
sales@salukitec.com
www.salukitec.com
Documents / Resources
 |
Saluki Tec S1134 Series Multi Channel Signal Generator [pdf] Owner's Manual S1134 Series Multi Channel Signal Generator, S1134, Series Multi Channel Signal Generator, Channel Signal Generator, Signal Generator, Generator |